addressable led strip arduino code code example

Example 1: digital led arduino

// include library
#include

//define number of LED and pin
#define NUM_LEDS 8
#define DATA_PIN 3

// create the ld object array
CRGB leds[NUM_LEDS];

// define 3 byte for the random color
byte  r, g, b;

void setup() {
  // init the LED object
  FastLED.addLeds(leds, NUM_LEDS);
  // set random seed
  randomSeed(analogRead(0));
}


void loop() {
  // loop over the NUM_LEDS
  for (int cur = 0; cur < NUM_LEDS; cur++) {
    // chose random value for the r/g/b
    r = random(0, 255);
    g = random(0, 255);
    b = random(0, 255);

    //set the value to the led
    leds[cur] = CRGB (r, g, b);

    // set the colors set into the phisical LED
    FastLED.show();

    // delay 50 millis
    FastLED.delay(200);
  }


}

Example 2: digital led arduino

#include "FastLED.h"
// How many leds in your strip?
#define NUM_LEDS 8
// For led chips like Neopixels, which have a data line, ground, and power, you just
// need to define DATA_PIN.  For led chipsets that are SPI based (four wires - data, clock,
// ground, and power), like the LPD8806 define both DATA_PIN and CLOCK_PIN
#define DATA_PIN 3
#define CLOCK_PIN 13
// Define the array of leds
CRGB leds[NUM_LEDS];
void setup() { 
     // Uncomment/edit one of the following lines for your leds arrangement.
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
 	  FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
     // FastLED.addLeds(leds, NUM_LEDS);
}
void loop() { 
 // Turn the LED on, then pause
 leds[0] = CRGB::Red;
 FastLED.show();
 delay(500);
 // Now turn the LED off, then pause
 leds[0] = CRGB::Black;
 FastLED.show();
 delay(500);
}