ALSA Api: How to play two wave files simultaneously?

You can configure ALSA's dmix plugin to allow multiple applications to share input/output devices.

An example configuration to do this is below:

pcm.dmixed {
    type dmix
    ipc_key 1024
    ipc_key_add_uid 0
    slave.pcm "hw:0,0"
}
pcm.dsnooped {
    type dsnoop
    ipc_key 1025
    slave.pcm "hw:0,0"
}

pcm.duplex {
    type asym
    playback.pcm "dmixed"
    capture.pcm "dsnooped"
}

# Instruct ALSA to use pcm.duplex as the default device
pcm.!default {
    type plug
    slave.pcm "duplex"
}
ctl.!default {
    type hw
    card 0
}

This does the following:

• creates a new device using the dmix plugin, which allows multiple apps to share the output stream
• creates another using dsnoop which does the same thing for the input stream
• merges these into a new duplex device that will support input and output using the asym plugin
• tell ALSA to use the new duplex device as the default device
• tell ALSA to use hw:0 to control the default device (alsamixer and so on)

Stick this in either ~/.asoundrc or /etc/asound.conf and you should be good to go.

For more information see http://www.alsa-project.org/main/index.php/Asoundrc#Software_mixing.

ALSA does not provide a mixer. If you need to play multiple audio streams at the same time, you need to mix them together on your own.

The easiest way this can be accomplished is by decoding the WAV files to float samples, add them, and clip them when converting them back to integer samples.

Alternatively, you can try to open the default audio device (and not a hardware device like "hw:0") multiple times, once for each stream you wish to play, and hope that the dmix ALSA plugin is loaded and will provide the mixing functionality.