Arduino COM port doesn't work

Installing Drivers for Arduino in Windows 8 / 7.

( I tried it for Uno r3, but i believe it will work for all Arduino Boards )

Plugin your Arduino Board

Go to Control Panel ---> System and Security ---> System ---> On the left pane Device Manger

Expand Other Devices.

Under Other Devices you will notice a icon with a small yellow error graphic. (Unplug all your other devices attached to any Serial Port)

Right Click on that device ---> Update Driver Software

Select Browse my computer for Driver Software

Click on Browse ---> Browse for the folder of Arduino Environment which you have downloaded from Arduino website. If not downloaded then http://arduino.cc/en/Main/Software

After Browsing mark include subfolder.

Click next ---> Your driver will be installed.

Collapse Other Devices ---> Expand Port ( its in device manager only under other devices )

You will see Arduino Written ---> Look for its COM PORT (close device manager)

Go to Arduino Environment ---> Tools ---> Serial Port ---> Select the COM PORT as mentioned in PORT in device manager. (If you are using any other Arduino Board instead of UNO then select the same in boards )

Upload your killer programmes and see them work . . .

I hope this helps. . .

Welcome

Did you install the drivers? See the Arduino installation instructions under #4. I don't know that machine but I doubt it doesn't have any COM ports.

I've had my drivers installed and the Arduino connected through an unpowered usb hub. Moving it to an USB port of my computer made it work.