Configure apache on elastic beanstalk

Having www.example.com go to example.com can be done with a CNAME in DNS if you don't care about having it actually being a redirect. If you need a redirect, you can add it to the Apache config below. The primary point of this answer is to detail how you modify Apache config on Elastic Beanstalk (because doing this properly is not very straight forward).

This answer assumes you have already enabled https in the load balancer security group, added the SSL certificate to the load balancer, added 443 to the ports forwarded by the load balancer, and pointed your domain name at the Elastic Beanstalk environment with Route 53 (or equivalent DNS service).

Amazon Linux 2

Most AWS Linux version 2 based platforms have the option to pick Apache as your proxy host. This can be done by going to "Configuration" > "Software" > "Container Options" and setting "Proxy Server" to "Apache", or adding the following to one of your .config files in .ebextensions:

option_settings:
  aws:elasticbeanstalk:environment:proxy:
    ProxyServer: apache

On AWS Linux 2, Apache is configured exclusively through adding files to your codebase in .plaform/httpd/conf.d/, from which they will get added to the server's Apache config. You can no longer edit Apache files through .ebextensions.

To do an HTTP to HTTPS redirect using Apache, add a configuration file named .platform/httpd/conf.d/ssl_rewrite.conf to your codebase (relevant AWS docs) with the following contents:

RewriteEngine On
<If "-n '%{HTTP:X-Forwarded-Proto}' && %{HTTP:X-Forwarded-Proto} != 'https'">
RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} [R,L]
</If>

Note that nginx can be configured in a similar way, namely by adding a .conf file to .platform/nginx/conf.d/ (though the contents of this file will obviously be different).

Amazon Linux 1

All you need to do is add the following to one of your .config files in the .ebextensions directory of your project:

files:
    "/etc/httpd/conf.d/ssl_rewrite.conf":
        mode: "000644"
        owner: root
        group: root
        content: |
            RewriteEngine On
            <If "-n '%{HTTP:X-Forwarded-Proto}' && %{HTTP:X-Forwarded-Proto} != 'https'">
            RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} [R,L]
            </If>

Explanation

This is moderately straight forward outside of Elastic Beanstalk. One usually adds an Apache rewrite rule like the following:

RewriteCond %{HTTPS} off
RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI}

Or, if behind a load balancer, like we are in this case:

RewriteCond %{HTTP:X-Forwarded-Proto} !https
RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} [R,L]

However, these configurations only work within a <VirtualHost> block. Changing the RewriteCond to an <If> block allows it to work properly outside of a <VirtualHost> block, allowing us to put in in a standalone Apache config file. Note that standard Apache setup on CentOS (including the setup on ElasticBeanstalk) inculdes all files matching /etc/httpd/conf.d/*.conf, which matches the file path where we are storing this file.

The -n '%{HTTP:X-Forwarded-Proto}' part of the condition prevents it from redirecting if you are not behind a load balancer, allowing you to have shared configuration between a production evironment with a load balancer and https, and a staging environment that is single instance and does not have https. This is not necessary if you are using load balancers and https on all of your environments, but it doesn't hurt to have it.

Bad solutions I have seen

I have seen a lot of bad solutions to this problem, and it is worth going through them to understand why this solution is necessary.

  1. Use Cloudfront: Some people suggest using non-cached Cloudfront setup in front of Elastic Beanstalk to do the HTTP to HTTPS redirect. This adds a whole new service (thus adding complexity) that isn't exactly appropriate (Cloudfront is a CDN; it's not the right tool for forcing HTTPS on inherantly dynamic content). Apache config is the normal solution to this problem and Elastic Beanstalk uses Apache, so that's the way we should go.

  2. SSH into the server and...: This is completely antithetical to the point of Elastic Beanstalk and has so many problems. Any new instances created by autoscaling won't have the modified configuration. Any cloned environments won't have the configuration. Any number of a reasonable set of environment changes will wipe out the configuration. This is just such a bad idea.

  3. Overwrite the Apache config with a new file: This is getting into the right realm of solution but leaves you with a maintenance nightmare if Elastic Beanstalk changes aspects of the server setup (which they very well may do). Also see the problems in the next item.

  4. Dynamically edit the Apache config file to add a few lines: This is a decent idea. The problems with this is that it won't work if Elastic Beanstalk ever changes the name of their default Apache config file, and that this file can get overwritten when you least expect: https://forums.aws.amazon.com/thread.jspa?threadID=163369


this is an easy solution

  1. ssh into your EC2 instance
  2. copy the contents of /etc/httpd/conf.d/wsgi.conf into a local file called wsgi.conf which will be placed in the base folder of your application
  3. Edit the local version of wsgi.conf and add the following redirect rules within the < VirtualHost> < /VirtualHost> tags

    RewriteEngine On
    RewriteCond %{HTTP:X-Forwarded-Proto} !https
    RewriteRule !/status https://%{SERVER_NAME}%{REQUEST_URI} [L,R=301]
    
  4. Change the “/status” to whatever page you are using as a health check page.

  5. Save the file
  6. Edit your < app>.conf file inside your .ebextensions directory to add a container command to copy this version of wsgi.conf over Amazon’s version

    container_commands:
    01_syncdb:
      command: "django-admin.py syncdb --noinput" leader_only: true
    02_collectstatic:
      command: "django-admin.py collectstatic --noinput"
    03_wsgireplace:
      command: 'cp wsgi.conf /etc/httpd/conf.d/wsgi.conf'
    ...
    
  7. Deploy the code.

  8. The deployed version of wsgi.conf at /etc/httpd/conf.d/wsgi.conf will now include the necessary redirect rules.

It should work and the file will be properly updated for each deployment. The only thing to watch for is if Amazon changes their base wsgi.conf file contents in the future, then your copy may no longer work.

Source : rickchristianson