CSS Grid Layout not working in IE11 even with prefixes

The answer has been given by Faisal Khurshid and Michael_B already.
This is just an attempt to make a possible solution more obvious.

For IE11 and below you need to enable grid's older specification in the parent div e.g. body or like here "grid" like so:

.grid-parent{display:-ms-grid;}

then define the amount and width of the columns and rows like e.g. so:

.grid-parent{
  -ms-grid-columns: 1fr 3fr;
  -ms-grid-rows: 4fr;
}

finally you need to explicitly tell the browser where your element (item) should be placed in e.g. like so:

.grid-item-1{
  -ms-grid-column: 1;
  -ms-grid-row: 1;
}

.grid-item-2{
  -ms-grid-column: 2;
  -ms-grid-row: 1;
}

IE11 uses an older version of the Grid specification.

The properties you are using don't exist in the older grid spec. Using prefixes makes no difference.

Here are three problems I see right off the bat.

repeat()

The repeat() function doesn't exist in the older spec, so it isn't supported by IE11.

You need to use the correct syntax, which is covered in another answer to this post, or declare all row and column lengths.

Instead of:

.grid {
  display: -ms-grid;
  display: grid;
  -ms-grid-columns: repeat( 4, 1fr );
      grid-template-columns: repeat( 4, 1fr );
  -ms-grid-rows: repeat( 4, 270px );
      grid-template-rows: repeat( 4, 270px );
  grid-gap: 30px;
}

Use:

.grid {
  display: -ms-grid;
  display: grid;
  -ms-grid-columns: 1fr 1fr 1fr 1fr;             /* adjusted */
      grid-template-columns:  repeat( 4, 1fr );
  -ms-grid-rows: 270px 270px 270px 270px;        /* adjusted */
      grid-template-rows: repeat( 4, 270px );
  grid-gap: 30px;
}

Older spec reference: https://www.w3.org/TR/2011/WD-css3-grid-layout-20110407/#grid-repeating-columns-and-rows

span

The span keyword doesn't exist in the older spec, so it isn't supported by IE11. You'll have to use the equivalent properties for these browsers.

Instead of:

.grid .grid-item.height-2x {
  -ms-grid-row: span 2;
      grid-row: span 2;
}
.grid .grid-item.width-2x {
  -ms-grid-column: span 2;
      grid-column: span 2;
}

Use:

.grid .grid-item.height-2x {
  -ms-grid-row-span: 2;          /* adjusted */
      grid-row: span 2;
}
.grid .grid-item.width-2x {
  -ms-grid-column-span: 2;       /* adjusted */
      grid-column: span 2;
}

Older spec reference: https://www.w3.org/TR/2011/WD-css3-grid-layout-20110407/#grid-row-span-and-grid-column-span

grid-gap

The grid-gap property, as well as its long-hand forms grid-column-gap and grid-row-gap, don't exist in the older spec, so they aren't supported by IE11. You'll have to find another way to separate the boxes. I haven't read the entire older spec, so there may be a method. Otherwise, try margins.

grid item auto placement

There was some discussion in the old spec about grid item auto placement, but the feature was never implemented in IE11. (Auto placement of grid items is now standard in current browsers).

So unless you specifically define the placement of grid items, they will stack in cell 1,1.

Use the -ms-grid-row and -ms-grid-column properties.

  • CSS Grid auto placement in IE/EDGE
  • CSS Grid not working in ie11 despite prefixes
  • https://www.w3.org/TR/2011/WD-css3-grid-layout-20110407/#automatic-placement-of-grid-items

To support IE11 with auto-placement, I converted grid to table layout every time I used the grid layout in 1 dimension only. I also used margin instead of grid-gap.

The result is the same, see how you can do it here https://jsfiddle.net/hp95z6v1/3/


Michael has given a very comprehensive answer, but I'd like to point out a few things which you can still do to be able to use grids in IE in a nearly painless way.

The repeat functionality is supported

You can still use the repeat functionality, it's just hiding behind a different syntax. Instead of writing repeat(4, 1fr), you have to write (1fr)[4]. That's it. See this series of articles for the current state of affairs: https://css-tricks.com/css-grid-in-ie-debunking-common-ie-grid-misconceptions/

Supporting grid-gap

Grid gaps are supported in all browsers except IE. So you can use the @supports at-rule to set the grid-gaps conditionally for all new browsers:

Example:

.grid {
  display: grid;
}
.item {
  margin-right: 1rem;
  margin-bottom: 1rem;
}
@supports (grid-gap: 1rem) {
  .grid {
    grid-gap: 1rem;
  }
  .item {
    margin-right: 0;
    margin-bottom: 0;
  }
}

It's a little verbose, but on the plus side, you don't have to give up grids altogether just to support IE.

Use Autoprefixer

I can't stress this enough - half the pain of grids is solved just be using autoprefixer in your build step. Write your CSS in a standards-complaint way, and just let autoprefixer do it's job transforming all older spec properties automatically. When you decide you don't want to support IE, just change one line in the browserlist config and you'll have removed all IE-specific code from your built files.

Tags:

Html

Css

Internet Explorer 11

Css Grid

Recent Posts