Exposing a port on a live Docker container

You cannot do this via Docker, but you can access the container's un-exposed port from the host machine.

If you have a container with something running on its port 8000, you can run

wget http://container_ip:8000

To get the container's IP address, run the 2 commands:

docker ps
docker inspect container_name | grep IPAddress

Internally, Docker shells out to call iptables when you run an image, so maybe some variation on this will work.

To expose the container's port 8000 on your localhost's port 8001:

iptables -t nat -A  DOCKER -p tcp --dport 8001 -j DNAT --to-destination 172.17.0.19:8000

One way you can work this out is to setup another container with the port mapping you want, and compare the output of the iptables-save command (though, I had to remove some of the other options that force traffic to go via the docker proxy).

NOTE: this is subverting docker, so should be done with the awareness that it may well create blue smoke.

OR

Another alternative is to look at the (new? post 0.6.6?) -P option - which will use random host ports, and then wire those up.

OR

With 0.6.5, you could use the LINKs feature to bring up a new container that talks to the existing one, with some additional relaying to that container's -p flags? (I have not used LINKs yet.)

OR

With docker 0.11? you can use docker run --net host .. to attach your container directly to the host's network interfaces (i.e., net is not namespaced) and thus all ports you open in the container are exposed.

Here's what I would do:

• Commit the live container.
• Run the container again with the new image, with ports open (I'd recommend mounting a shared volume and opening the ssh port as well)

sudo docker ps 
sudo docker commit <containerid> <foo/live>
sudo docker run -i -p 22 -p 8000:80 -m /data:/data -t <foo/live> /bin/bash