full adder 1 bit vhdl code code example

Example: full adder vhdl code

library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
 
entity full_adder_vhdl_code is
 Port ( A : in STD_LOGIC;
 B : in STD_LOGIC;
 Cin : in STD_LOGIC;
 S : out STD_LOGIC;
 Cout : out STD_LOGIC);
end full_adder_vhdl_code;
 
architecture gate_level of full_adder_vhdl_code is
 
begin
 
 S <= A XOR B XOR Cin ;
 Cout <= (A AND B) OR (Cin AND A) OR (Cin AND B) ;
 
end gate_level;
Testbench VHDL Code for Full Adder
view sourceprint?
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
 
ENTITY Testbench_full_adder IS
END Testbench_full_adder;
 
ARCHITECTURE behavior OF Testbench_full_adder IS
 
 – Component Declaration for the Unit Under Test (UUT)
 
 COMPONENT full_adder_vhdl_code
 PORT(
 A : IN std_logic;
 B : IN std_logic;
 Cin : IN std_logic;
 S : OUT std_logic;
 Cout : OUT std_logic
 );
 END COMPONENT;
 
 – Inputs
 signal A : std_logic := '0';
 signal B : std_logic := '0';
 signal Cin : std_logic := '0';
 
 – Outputs
 signal S : std_logic;
 signal Cout : std_logic;
 
BEGIN
 
 – Instantiate the Unit Under Test (UUT)
 uut: full_adder_vhdl_code PORT MAP (
 A => A,
 B => B,
 Cin => Cin,
 S => S,
 Cout => Cout
 );
 
 – Stimulus process
 stim_proc: process
 begin
 – hold reset state for 100 ns.
 wait for 100 ns;
 
 – insert stimulus here
 A <= '1';
 B <= '0';
 Cin <= '0';
 wait for 10 ns;
 
 A <= '0';
 B <= '1';
 Cin <= '0';
 wait for 10 ns;
 
 A <= '1';
 B <= '1';
 Cin <= '0';
 wait for 10 ns;
 
 A <= '0';
 B <= '0';
 Cin <= '1';
 wait for 10 ns;
 
 A <= '1';
 B <= '0';
 Cin <= '1';
 wait for 10 ns;
 
 A <= '0';
 B <= '1';
 Cin <= '1';
 wait for 10 ns;
 
 A <= '1';
 B <= '1';
 Cin <= '1';
 wait for 10 ns;
 
 end process;
 
END;