How do I prompt for Yes/No/Cancel input in a Linux shell script?

At least five answers for one generic question.

Depending on

posix compliant: could work on poor systems with generic shell environments
bash specific: using so called bashisms

and if you want

simple ``in line'' question / answer (generic solutions)
pretty formatted interfaces, like ncurses or more graphical using libgtk or libqt...
use powerful readline history capability

1. POSIX generic solutions

You could use the read command, followed by if ... then ... else:

printf 'Is this a good question (y/n)? '
read answer

~~# if echo "$answer" | grep -iq "^y" ;then~~

if [ "$answer" != "${answer#[Yy]}" ] ;then # this grammar (the #[] operator) means that the variable $answer where any Y or y in 1st position will be dropped if they exist.
    echo Yes
else
    echo No
fi

(Thanks to Adam Katz's comment: Replaced the test above with one that is more portable and avoids one fork:)

POSIX, but single key feature

But if you don't want the user to have to hit Return, you could write:

(Edited: As @JonathanLeffler rightly suggest, saving stty's configuration could be better than simply force them to sane.)

printf 'Is this a good question (y/n)? '
old_stty_cfg=$(stty -g)
stty raw -echo ; answer=$(head -c 1) ; stty $old_stty_cfg # Careful playing with stty
if echo "$answer" | grep -iq "^y" ;then
    echo Yes
else
    echo No
fi

Note: This was tested under sh, bash, ksh, dash and busybox!

Same, but waiting explicitly for y or n:

#/bin/sh
printf 'Is this a good question (y/n)? '
old_stty_cfg=$(stty -g)
stty raw -echo
answer=$( while ! head -c 1 | grep -i '[ny]' ;do true ;done )
stty $old_stty_cfg
if echo "$answer" | grep -iq "^y" ;then
    echo Yes
else
    echo No
fi

Using dedicated tools

There are many tools which were built using libncurses, libgtk, libqt or other graphical libraries. For example, using whiptail:

if whiptail --yesno "Is this a good question" 20 60 ;then
    echo Yes
else
    echo No
fi

Depending on your system, you may need to replace whiptail with another similiar tool:

dialog --yesno "Is this a good question" 20 60 && echo Yes

gdialog --yesno "Is this a good question" 20 60 && echo Yes

kdialog --yesno "Is this a good question" 20 60 && echo Yes

where 20 is height of dialog box in number of lines and 60 is width of the dialog box. These tools all have near same syntax.

DIALOG=whiptail
if [ -x /usr/bin/gdialog ] ;then DIALOG=gdialog ; fi
if [ -x /usr/bin/xdialog ] ;then DIALOG=xdialog ; fi
...
$DIALOG --yesno ...

2. Bash specific solutions

Basic in line method

read -p "Is this a good question (y/n)? " answer
case ${answer:0:1} in
    y|Y )
        echo Yes
    ;;
    * )
        echo No
    ;;
esac

I prefer to use case so I could even test for yes | ja | si | oui if needed...

in line with single key feature

Under bash, we can specify the length of intended input for for the read command:

read -n 1 -p "Is this a good question (y/n)? " answer

Under bash, read command accepts a timeout parameter, which could be useful.

read -t 3 -n 1 -p "Is this a good question (y/n)? " answer
[ -z "$answer" ] && answer="Yes"  # if 'yes' have to be default choice

3. Some tricks for dedicated tools

More sophisticated dialog boxes, beyond simple yes - no purposes:

dialog --menu "Is this a good question" 20 60 12 y Yes n No m Maybe

Progress bar:

dialog --gauge "Filling the tank" 20 60 0 < <(
    for i in {1..100};do
        printf "XXX\n%d\n%(%a %b %T)T progress: %d\nXXX\n" $i -1 $i
        sleep .033
    done
)

Little demo:

#!/bin/sh
while true ;do
    [ -x "$(which ${DIALOG%% *})" ] || DIALOG=dialog
    DIALOG=$($DIALOG --menu "Which tool for next run?" 20 60 12 2>&1 \
            whiptail       "dialog boxes from shell scripts" >/dev/tty \
            dialog         "dialog boxes from shell with ncurses" \
            gdialog        "dialog boxes from shell with Gtk" \
            kdialog        "dialog boxes from shell with Kde" ) || exit
    clear;echo "Choosed: $DIALOG."
    for i in `seq 1 100`;do
        date +"`printf "XXX\n%d\n%%a %%b %%T progress: %d\nXXX\n" $i $i`"
        sleep .0125
      done | $DIALOG --gauge "Filling the tank" 20 60 0
    $DIALOG --infobox "This is a simple info box\n\nNo action required" 20 60
    sleep 3
    if $DIALOG --yesno  "Do you like this demo?" 20 60 ;then
        AnsYesNo=Yes; else AnsYesNo=No; fi
    AnsInput=$($DIALOG --inputbox "A text:" 20 60 "Text here..." 2>&1 >/dev/tty)
    AnsPass=$($DIALOG --passwordbox "A secret:" 20 60 "First..." 2>&1 >/dev/tty)
    $DIALOG --textbox /etc/motd 20 60
    AnsCkLst=$($DIALOG --checklist "Check some..." 20 60 12 \
        Correct "This demo is useful"        off \
        Fun        "This demo is nice"        off \
        Strong        "This demo is complex"        on 2>&1 >/dev/tty)
    AnsRadio=$($DIALOG --radiolist "I will:" 20 60 12 \
        " -1" "Downgrade this answer"        off \
        "  0" "Not do anything"                on \
        " +1" "Upgrade this anser"        off 2>&1 >/dev/tty)
    out="Your answers:\nLike: $AnsYesNo\nInput: $AnsInput\nSecret: $AnsPass"
    $DIALOG --msgbox "$out\nAttribs: $AnsCkLst\nNote: $AnsRadio" 20 60
  done

More samples? Have a look at Using whiptail for choosing USB device and USB removable storage selector: USBKeyChooser

5. Using readline's history

Example:

#!/bin/bash

set -i
HISTFILE=~/.myscript.history
history -c
history -r

myread() {
    read -e -p '> ' $1
    history -s ${!1}
}
trap 'history -a;exit' 0 1 2 3 6

while myread line;do
    case ${line%% *} in
        exit )  break ;;
        *    )  echo "Doing something with '$line'" ;;
      esac
  done

This will create a file .myscript.history in your $HOME directory, than you could use readline's history commands, like Up, Down, Ctrl+r and others.

The simplest and most widely available method to get user input at a shell prompt is the read command. The best way to illustrate its use is a simple demonstration:

while true; do
    read -p "Do you wish to install this program? " yn
    case $yn in
        [Yy]* ) make install; break;;
        [Nn]* ) exit;;
        * ) echo "Please answer yes or no.";;
    esac
done

Another method, pointed out by Steven Huwig, is Bash's select command. Here is the same example using select:

echo "Do you wish to install this program?"
select yn in "Yes" "No"; do
    case $yn in
        Yes ) make install; break;;
        No ) exit;;
    esac
done

With select you don't need to sanitize the input – it displays the available choices, and you type a number corresponding to your choice. It also loops automatically, so there's no need for a while true loop to retry if they give invalid input.

Also, Léa Gris demonstrated a way to make the request language agnostic in her answer. Adapting my first example to better serve multiple languages might look like this:

set -- $(locale LC_MESSAGES)
yesexpr="$1"; noexpr="$2"; yesword="$3"; noword="$4"

while true; do
    read -p "Install (${yesword} / ${noword})? " yn
    if [[ "$yn" =~ $yesexpr ]]; then make install; exit; fi
    if [[ "$yn" =~ $noexpr ]]; then exit; fi
    echo "Answer ${yesword} / ${noword}."
done

Obviously other communication strings remain untranslated here (Install, Answer) which would need to be addressed in a more fully completed translation, but even a partial translation would be helpful in many cases.

Finally, please check out the excellent answer by F. Hauri.

echo "Please enter some input: "
read input_variable
echo "You entered: $input_variable"

How do I prompt for Yes/No/Cancel input in a Linux shell script?

At least five answers for one generic question.

1. POSIX generic solutions

POSIX, but single key feature

Using dedicated tools

2. Bash specific solutions

Basic in line method

in line with single key feature

3. Some tricks for dedicated tools

5. Using readline's history

Tags:

Linux

Scripting

Shell

Bash

Related

Recent Posts