How to text-to-speech output using command-line?
In order of descending popularity:
say converts text to audible speech using the GNUstep speech engine.
sudo apt-get install gnustep-gui-runtime say "hello"
festival General multi-lingual speech synthesis system.
sudo apt-get install festival echo "hello" | festival --tts
spd-say sends text-to-speech output request to speech-dispatcher
sudo apt-get install speech-dispatcher spd-say "hello"
espeak is a multi-lingual software speech synthesizer.
sudo apt-get install espeak espeak "hello"
espeak
is a nice little tool.
I just like playing around with it in a command line. You might find it conflicts with Pulseaudio so I'm using a long-winded version that negates having to set it up properly.
sudo apt-get install espeak
espeak --stdout "this is a test" | paplay
espeak --help
will show you the options to calibrate reading speed, pitch, voice, etc.
When you're doing your notes, save them as a text file and then:
echo "these are my notes" > text.txt
espeak --stdout -f text.txt > text.wav
paplay text.wav # you should hear "these are my notes"
You can then play around with ffmeg et al to compress this down from PCM to something more manageable like MP3 or OGG. But that's a different story.
From man spd-say
:
NAME spd-say - send text-to-speech output request to speech-dispatcher SYNOPSIS spd-say [options] "some text" DESCRIPTION spd-say sends text-to-speech output request to speech-dispatcher process which handles it and ideally outputs the result to the audio system. OPTIONS -r, --rate Set the rate of the speech (between -100 and +100, default: 0) -p, --pitch Set the pitch of the speech (between -100 and +100, default: 0) -i, --volume Set the volume (intensity) of the speech (between -100 and +100, default: 0)
Hence you can get text-to-speech by following command:
spd-say "<type text>"
Ex:
spd-say "Welcome to Ubuntu Linux"
You can also set speech rate, pitch, volume etc. see man-page.