Circular shift in c

This is a method of doing a circular shift. Suppose that x is 8 bits.

+----+----+----+----+----+----+----+----+
| x1   x2   x3   x4   x5   x6   x7   x8 |
+----+----+----+----+----+----+----+----+

Then, shifting it left by 3 gives us:

+----+----+----+----+----+----+----+----+
| x4   x5   x6   x7   x8    0    0    0 |
+----+----+----+----+----+----+----+----+

Now, CHAR_BIT*sizeof(x) is the same as the width of x in bits, 8. So shifting x to the right by 8 - 3 gives us:

+----+----+----+----+----+----+----+----+
| 0    0    0    0    0    x1   x2   x3 |
+----+----+----+----+----+----+----+----+

And taking the OR you get:

+----+----+----+----+----+----+----+----+
| x4   x5   x6   x7   x8   x1   x2   x3 |
+----+----+----+----+----+----+----+----+

This is technically non-portable because it is non-portable to shift by an amount equal to the width of the type -- so if shift is 8, then the left shift is wrong, and if the shift is 0, then the right shift is wrong. However, this works in practice on all three common behaviors when shifting by the type width. (In practice, the shift amount is reduced by some modulo -- either the bit width of the type or some larger number.)

It is called a circular shift or "rotation" because the bits that get shifted out on the left get shifted back in on the right.

Sophisticated compilers will actually compile the code down to a hardware rotation instruction.

(x << shift) 

Shifts it 'shift' number of bits to the left, returns the shifted out bits

(x >> (sizeof(x)*CHAR_BIT - shift));

Makes space for accommodating those bits

CHAR_BIT is the number of bits in char, so is 8 mostly. In C, you don't handle one bit at a time, but at a minimum, char number of bits. So that is the granularity you get.

In general,

For a char, when you do a bit-rotate, you would do it on an 8-bit field (1 byte)

For an int, when you do a rotate, you would do it on a 32-bit field (4 bytes)

---

Example with 8 bits:

x = 11010101
shift = 2

x << (shift) = 01010100 //shifted left by 2 bits

= x >> ((1 * CHAR_BIT) - shift)
= x >> (6) 
= 00000011 //shifted right by 6bits

OR these bit-wise to give

01010100 //x << 2
00000011 //x >> 6
________
01010111

That is the circular shifted value by 2 bits

CHAR_BIT is the number of bits per byte, should be 8 always.

shift is the number of bits you want to shift left in a circular fashion, so the bits that get shifted out left, come back on the right.

     1110 0000 << 2 results in:
     1000 0011

code for the example:

   y = (x << 2) | (x >> (8 - 2));