Does it matter if router is set to 10.0.0.1 or to 192.168.1.1?
It does not matter that the router is configured to use 10.x.x.x addresses as opposed to 192.168.x.x addresses, as both are reserved for use in private networks. The fact that you can even see the router administration page is evidence that your wireless network is functioning properly. You should look into your internet settings on your router to see if you have a valid IP address from your ISP.
No, it does not matter. Try the following:
- Connect to your router via Ethernet
- Configure your client's Ethernet address according to the settings of your router (i.e. 10.0.0.123 if your router is 10.0.0.1)
- Point your browser to the router's administration page (i.e. http://10.0.0.1)
- Check that its wireless interface has SSID broadcasting enabled (so you can see it even if you are not connected)
- Check that you have set up encryption correctly
- Check that the router provides a DHCP server
- (optional) When all works fine, disable SSID broadcasting
I understand that you have 2 routers:
- Asus (admin interface trough 192.168.1.1);
- Netgear (admin interface trough 10.0.0.1).
You have to setup wifi network on both. But is "Very important" to know the capabilities of devices you connect:
- Wireless standards (802.11a, 802.11b/g/n and/or 802.11ac), and which your device is capable of receiving - see https://www.lifewire.com/wireless-standards-802-11a-802-11b-g-n-and-802-11ac-816553;
- Security standards (WPA2-PSK is best), if your laptop/phone can use it;
- Types of encryption (AES is best), also if your device have it - see https://www.howtogeek.com/204697/wi-fi-security-should-you-use-wpa2-aes-wpa2-tkip-or-both/
Ok, now the you have all these details, you have to set up both networks so that they don't overlap and in order to get conected to one when other is not available. You need to setup them as folows:
- Set bandwidth in order to be visible to devices(20 or 40Mhz) see https://routerguide.net/setting-up-20-mhz-or-40-mhz-bandwidth-how-to-improve-wifi-network-performance/
- Set DIFFERENT channels so that networks do not interfere (see https://en.wikipedia.org/wiki/List_of_WLAN_channels).
At last, all you have to do is connect to each network with your device so that he connects to one of them when the other is out of range.