Getting Processor Information

To get the Processor model use the below command in a terminal.

cat /proc/cpuinfo  | grep 'name'| uniq

To get the information about number of processors

cat /proc/cpuinfo  | grep process| wc -l

The simplest way to do this is to use the command created for that, lscpu:

user@host:~$ lscpu
Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                2
On-line CPU(s) list:   0,1
Thread(s) per core:    1
Core(s) per socket:    2
Socket(s):             1
NUMA node(s):          1
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 55
Model name:            Intel(R) Celeron(R) CPU  N2840  @ 2.16GHz
Stepping:              8
CPU MHz:               697.301
CPU max MHz:           2582,3000
CPU min MHz:           499,8000
BogoMIPS:              4331.60
Virtualization:        VT-x
L1d cache:             24K
L1i cache:             32K
L2 cache:              1024K
NUMA node0 CPU(s):     0,1
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep
mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl 
xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor 
ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt  
tsc_deadline_timer rdrand lahf_lm 3dnowprefetch epb tpr_shadow vnmi 
flexpriority ept vpid tsc_adjust smep erms dtherm ida arat

This command will tell you your chipset's characteristics as well as any supported instructions (or flags) in an easy-to-use and simple-to-read manner.

It's often overlooked, so worth a shot. Sorry if this is insultingly obvious :

Alt-F2, then gnome-system-monitor

Also, when I ran sudo lshw | grep -i cpu, I see a line which says cpus=2.