How to implement big int in C++

addition would probably have to be done in the standard linear time algorithm
but for multiplication you could try http://en.wikipedia.org/wiki/Karatsuba_algorithm

A fun challenge. :)

I assume that you want integers of arbitrary length. I suggest the following approach:

Consider the binary nature of the datatype "int". Think about using simple binary operations to emulate what the circuits in your CPU do when they add things. In case you are interested more in-depth, consider reading this wikipedia article on half-adders and full-adders. You'll be doing something similar to that, but you can go down as low level as that - but being lazy, I thought I'd just forego and find a even simpler solution.

But before going into any algorithmic details about adding, subtracting, multiplying, let's find some data structure. A simple way, is of course, to store things in a std::vector.

template< class BaseType >
class BigInt
{
typedef typename BaseType BT;
protected: std::vector< BaseType > value_;
};

You might want to consider if you want to make the vector of a fixed size and if to preallocate it. Reason being that for diverse operations, you will have to go through each element of the vector - O(n). You might want to know offhand how complex an operation is going to be and a fixed n does just that.

But now to some algorithms on operating on the numbers. You could do it on a logic-level, but we'll use that magic CPU power to calculate results. But what we'll take over from the logic-illustration of Half- and FullAdders is the way it deals with carries. As an example, consider how you'd implement the += operator. For each number in BigInt<>::value_, you'd add those and see if the result produces some form of carry. We won't be doing it bit-wise, but rely on the nature of our BaseType (be it long or int or short or whatever): it overflows.

Surely, if you add two numbers, the result must be greater than the greater one of those numbers, right? If it's not, then the result overflowed.

template< class BaseType >
BigInt< BaseType >& BigInt< BaseType >::operator += (BigInt< BaseType > const& operand)
{
  BT count, carry = 0;
  for (count = 0; count < std::max(value_.size(), operand.value_.size(); count++)
  {
    BT op0 = count < value_.size() ? value_.at(count) : 0, 
       op1 = count < operand.value_.size() ? operand.value_.at(count) : 0;
    BT digits_result = op0 + op1 + carry;
    if (digits_result-carry < std::max(op0, op1)
    {
      BT carry_old = carry;
      carry = digits_result;
      digits_result = (op0 + op1 + carry) >> sizeof(BT)*8; // NOTE [1]
    }
    else carry = 0;
  }

  return *this;
}
// NOTE 1: I did not test this code. And I am not sure if this will work; if it does
//         not, then you must restrict BaseType to be the second biggest type 
//         available, i.e. a 32-bit int when you have a 64-bit long. Then use
//         a temporary or a cast to the mightier type and retrieve the upper bits. 
//         Or you do it bitwise. ;-)

The other arithmetic operation go analogous. Heck, you could even use the stl-functors std::plus and std::minus, std::times and std::divides, ..., but mind the carry. :) You can also implement multiplication and division by using your plus and minus operators, but that's very slow, because that would recalculate results you already calculated in prior calls to plus and minus in each iteration. There are a lot of good algorithms out there for this simple task, use wikipedia or the web.

And of course, you should implement standard operators such as operator<< (just shift each value in value_ to the left for n bits, starting at the value_.size()-1... oh and remember the carry :), operator< - you can even optimize a little here, checking the rough number of digits with size() first. And so on. Then make your class useful, by befriendig std::ostream operator<<.

Hope this approach is helpful!

There's a complete section on this: [The Art of Computer Programming, vol.2: Seminumerical Algorithms, section 4.3 Multiple Precision Arithmetic, pp. 265-318 (ed.3)]. You may find other interesting material in Chapter 4, Arithmetic.

If you really don't want to look at another implementation, have you considered what it is you are out to learn? There are innumerable mistakes to be made and uncovering those is instructive and also dangerous. There are also challenges in identifying important computational economies and having appropriate storage structures for avoiding serious performance problems.

A Challenge Question for you: How do you intend to test your implementation and how do you propose to demonstrate that it's arithmetic is correct?

You might want another implementation to test against (without looking at how it does it), but it will take more than that to be able to generalize without expecting an excrutiating level of testing. Don't forget to consider failure modes (out of memory problems, out of stack, running too long, etc.).

Have fun!

Things to consider for a big int class:

1. Mathematical operators: +, -, /, *, % Don't forget that your class may be on either side of the operator, that the operators can be chained, that one of the operands could be an int, float, double, etc.

2. I/O operators: >>, << This is where you figure out how to properly create your class from user input, and how to format it for output as well.

3. Conversions/Casts: Figure out what types/classes your big int class should be convertible to, and how to properly handle the conversion. A quick list would include double and float, and may include int (with proper bounds checking) and complex (assuming it can handle the range).