Is std::vector so much slower than plain arrays?

Using the following:

g++ -O3 Time.cpp -I <MyBoost>
./a.out
UseArray completed in 2.196 seconds
UseVector completed in 4.412 seconds
UseVectorPushBack completed in 8.017 seconds
The whole thing completed in 14.626 seconds

So array is twice as quick as vector.

But after looking at the code in more detail this is expected; as you run across the vector twice and the array only once. Note: when you resize() the vector you are not only allocating the memory but also running through the vector and calling the constructor on each member.

Re-Arranging the code slightly so that the vector only initializes each object once:

 std::vector<Pixel>  pixels(dimensions * dimensions, Pixel(255,0,0));

Now doing the same timing again:

g++ -O3 Time.cpp -I <MyBoost>
./a.out
UseVector completed in 2.216 seconds

The vector now performance only slightly worse than the array. IMO this difference is insignificant and could be caused by a whole bunch of things not associated with the test.

I would also take into account that you are not correctly initializing/Destroying the Pixel object in the UseArrray() method as neither constructor/destructor is not called (this may not be an issue for this simple class but anything slightly more complex (ie with pointers or members with pointers) will cause problems.

Great question. I came in here expecting to find some simple fix that would speed the vector tests right up. That didn't work out quite like I expected!

Optimization helps, but it's not enough. With optimization on I'm still seeing a 2X performance difference between UseArray and UseVector. Interestingly, UseVector was significantly slower than UseVectorPushBack without optimization.

# g++ -Wall -Wextra -pedantic -o vector vector.cpp
# ./vector
UseArray completed in 20.68 seconds
UseVector completed in 120.509 seconds
UseVectorPushBack completed in 37.654 seconds
The whole thing completed in 178.845 seconds
# g++ -Wall -Wextra -pedantic -O3 -o vector vector.cpp
# ./vector
UseArray completed in 3.09 seconds
UseVector completed in 6.09 seconds
UseVectorPushBack completed in 9.847 seconds
The whole thing completed in 19.028 seconds

Idea #1 - Use new[] instead of malloc

I tried changing malloc() to new[] in UseArray so the objects would get constructed. And changing from individual field assignment to assigning a Pixel instance. Oh, and renaming the inner loop variable to j.

void UseArray()
{
    TestTimer t("UseArray");

    for(int i = 0; i < 1000; ++i)
    {   
        int dimension = 999;

        // Same speed as malloc().
        Pixel * pixels = new Pixel[dimension * dimension];

        for(int j = 0 ; j < dimension * dimension; ++j)
            pixels[j] = Pixel(255, 0, 0);

        delete[] pixels;
    }
}

Surprisingly (to me), none of those changes made any difference whatsoever. Not even the change to new[] which will default construct all of the Pixels. It seems that gcc can optimize out the default constructor calls when using new[], but not when using vector.

Idea #2 - Remove repeated operator[] calls

I also attempted to get rid of the triple operator[] lookup and cache the reference to pixels[j]. That actually slowed UseVector down! Oops.

for(int j = 0; j < dimension * dimension; ++j)
{
    // Slower than accessing pixels[j] three times.
    Pixel &pixel = pixels[j];
    pixel.r = 255;
    pixel.g = 0;
    pixel.b = 0;
}

# ./vector 
UseArray completed in 3.226 seconds
UseVector completed in 7.54 seconds
UseVectorPushBack completed in 9.859 seconds
The whole thing completed in 20.626 seconds

Idea #3 - Remove constructors

What about removing the constructors entirely? Then perhaps gcc can optimize out the construction of all of the objects when the vectors are created. What happens if we change Pixel to:

struct Pixel
{
    unsigned char r, g, b;
};

Result: about 10% faster. Still slower than an array. Hm.

# ./vector 
UseArray completed in 3.239 seconds
UseVector completed in 5.567 seconds

Idea #4 - Use iterator instead of loop index

How about using a vector<Pixel>::iterator instead of a loop index?

for (std::vector<Pixel>::iterator j = pixels.begin(); j != pixels.end(); ++j)
{
    j->r = 255;
    j->g = 0;
    j->b = 0;
}

Result:

# ./vector 
UseArray completed in 3.264 seconds
UseVector completed in 5.443 seconds

Nope, no different. At least it's not slower. I thought this would have performance similar to #2 where I used a Pixel& reference.

Conclusion

Even if some smart cookie figures out how to make the vector loop as fast as the array one, this does not speak well of the default behavior of std::vector. So much for the compiler being smart enough to optimize out all the C++ness and make STL containers as fast as raw arrays.

The bottom line is that the compiler is unable to optimize away the no-op default constructor calls when using std::vector. If you use plain new[] it optimizes them away just fine. But not with std::vector. Even if you can rewrite your code to eliminate the constructor calls that flies in face of the mantra around here: "The compiler is smarter than you. The STL is just as fast as plain C. Don't worry about it."

This is an old but popular question.

At this point, many programmers will be working in C++11. And in C++11 the OP's code as written runs equally fast for UseArray or UseVector.

UseVector completed in 3.74482 seconds
UseArray completed in 3.70414 seconds

The fundamental problem was that while your Pixel structure was uninitialized, std::vector<T>::resize( size_t, T const&=T() ) takes a default constructed Pixel and copies it. The compiler did not notice it was being asked to copy uninitialized data, so it actually performed the copy.

In C++11, std::vector<T>::resize has two overloads. The first is std::vector<T>::resize(size_t), the other is std::vector<T>::resize(size_t, T const&). This means when you invoke resize without a second argument, it simply default constructs, and the compiler is smart enough to realize that default construction does nothing, so it skips the pass over the buffer.

(The two overloads where added to handle movable, constructable and non-copyable types -- the performance improvement when working on uninitialized data is a bonus).

The push_back solution also does fencepost checking, which slows it down, so it remains slower than the malloc version.

live example (I also replaced the timer with chrono::high_resolution_clock).

Note that if you have a structure that usually requires initialization, but you want to handle it after growing your buffer, you can do this with a custom std::vector allocator. If you want to then move it into a more normal std::vector, I believe careful use of allocator_traits and overriding of == might pull that off, but am unsure.