Java Stream API: why the distinction between sequential and parallel execution mode?
It seems like you should just be able to declare a Stream, and the choice of sequential/parallel execution should be handled automagically in a layer below, either by library code or the JVM itself as a function of the cores available at runtime, the size of the problem, etc.
The reality is that a) streams are a library, and have no special JVM magic, and b) you can't really design a library smart enough to automagically figure out what the right decision is in this particular case. There's no sensible way to estimate how costly a particular function will be without running it -- even if you could introspect its implementation, which you can't -- and now you're introducing a benchmark into every stream operation, trying to figure out if parallelizing it will be worth the cost of the parallelism overhead. That's just not practical, especially given that you don't know in advance how bad the parallelism overhead is, either.
A parallel stream is always preferable, given appropriate number of cores and problem size to justify the overhead, due to the performance gains.
Not always, in practice. Some tasks are just so small that they're not worth parallelizing, and parallelism does always have some overhead. (And frankly, most programmers tend to overestimate the usefulness of parallelism, slapping it everywhere when it's really hurting performance.)
Basically, it's a hard enough problem that you basically have to shove it off onto the programmer.
There's an interesting case in this question showing that sometimes parallel stream might be slower in orders of magnitude. In that particular example parallel version runs for ten minutes while sequential takes several seconds.
There is no functional difference between a sequential/parallel streams. Output is never affected by execution mode.
There is a difference between sequential/parallel streams execution.
In the below code TEST_2 results shows that parallel thread execution is very much faster than the sequential way.
A parallel stream is always preferable, given appropriate number of cores and problem size to justify the overhead, due to the performance gains.
Not really. if task is not worthy(simple tasks) to be executed in parallel threads, then it is simply we are adding overhead to our code.
TEST_1 results shows this. Also note that if all the worker threads are busy on one parallel execution tasks; then other parallel stream operation elsewhere in your code will be waiting for that.
We want to write code once and run anywhere without having to care about the hardware (this is Java, after all).
Since only programmer knows about; is it worthy to execute this task in parallel/sequential irrespective of CPU's. So java API exposed both option to the developer.
import java.util.ArrayList;
import java.util.List;
/*
* Performance test over internal(parallel/sequential) and external iterations.
* https://docs.oracle.com/javase/tutorial/collections/streams/parallelism.html
*
*
* Parallel computing involves dividing a problem into subproblems,
* solving those problems simultaneously (in parallel, with each subproblem running in a separate thread),
* and then combining the results of the solutions to the subproblems. Java SE provides the fork/join framework,
* which enables you to more easily implement parallel computing in your applications. However, with this framework,
* you must specify how the problems are subdivided (partitioned).
* With aggregate operations, the Java runtime performs this partitioning and combining of solutions for you.
*
* Limit the parallelism that the ForkJoinPool offers you. You can do it yourself by supplying the -Djava.util.concurrent.ForkJoinPool.common.parallelism=1,
* so that the pool size is limited to one and no gain from parallelization
*
* @see ForkJoinPool
* https://docs.oracle.com/javase/tutorial/essential/concurrency/forkjoin.html
*
* ForkJoinPool, that pool creates a fixed number of threads (default: number of cores) and
* will never create more threads (unless the application indicates a need for those by using managedBlock).
* * http://stackoverflow.com/questions/10797568/what-determines-the-number-of-threads-a-java-forkjoinpool-creates
*
*/
public class IterationThroughStream {
private static boolean found = false;
private static List<Integer> smallListOfNumbers = null;
public static void main(String[] args) throws InterruptedException {
// TEST_1
List<String> bigListOfStrings = new ArrayList<String>();
for(Long i = 1l; i <= 1000000l; i++) {
bigListOfStrings.add("Counter no: "+ i);
}
System.out.println("Test Start");
System.out.println("-----------");
long startExternalIteration = System.currentTimeMillis();
externalIteration(bigListOfStrings);
long endExternalIteration = System.currentTimeMillis();
System.out.println("Time taken for externalIteration(bigListOfStrings) is :" + (endExternalIteration - startExternalIteration) + " , and the result found: "+ found);
long startInternalIteration = System.currentTimeMillis();
internalIteration(bigListOfStrings);
long endInternalIteration = System.currentTimeMillis();
System.out.println("Time taken for internalIteration(bigListOfStrings) is :" + (endInternalIteration - startInternalIteration) + " , and the result found: "+ found);
// TEST_2
smallListOfNumbers = new ArrayList<Integer>();
for(int i = 1; i <= 10; i++) {
smallListOfNumbers.add(i);
}
long startExternalIteration1 = System.currentTimeMillis();
externalIterationOnSleep(smallListOfNumbers);
long endExternalIteration1 = System.currentTimeMillis();
System.out.println("Time taken for externalIterationOnSleep(smallListOfNumbers) is :" + (endExternalIteration1 - startExternalIteration1));
long startInternalIteration1 = System.currentTimeMillis();
internalIterationOnSleep(smallListOfNumbers);
long endInternalIteration1 = System.currentTimeMillis();
System.out.println("Time taken for internalIterationOnSleep(smallListOfNumbers) is :" + (endInternalIteration1 - startInternalIteration1));
// TEST_3
Thread t1 = new Thread(IterationThroughStream :: internalIterationOnThread);
Thread t2 = new Thread(IterationThroughStream :: internalIterationOnThread);
Thread t3 = new Thread(IterationThroughStream :: internalIterationOnThread);
Thread t4 = new Thread(IterationThroughStream :: internalIterationOnThread);
t1.start();
t2.start();
t3.start();
t4.start();
Thread.sleep(30000);
}
private static boolean externalIteration(List<String> bigListOfStrings) {
found = false;
for(String s : bigListOfStrings) {
if(s.equals("Counter no: 1000000")) {
found = true;
}
}
return found;
}
private static boolean internalIteration(List<String> bigListOfStrings) {
found = false;
bigListOfStrings.parallelStream().forEach(
(String s) -> {
if(s.equals("Counter no: 1000000")){ //Have a breakpoint to look how many threads are spawned.
found = true;
}
}
);
return found;
}
private static boolean externalIterationOnSleep(List<Integer> smallListOfNumbers) {
found = false;
for(Integer s : smallListOfNumbers) {
try {
Thread.sleep(100);
} catch (Exception e) {
e.printStackTrace();
}
}
return found;
}
private static boolean internalIterationOnSleep(List<Integer> smallListOfNumbers) {
found = false;
smallListOfNumbers.parallelStream().forEach( //Removing parallelStream() will behave as single threaded (sequential access).
(Integer s) -> {
try {
Thread.sleep(100); //Have a breakpoint to look how many threads are spawned.
} catch (Exception e) {
e.printStackTrace();
}
}
);
return found;
}
public static void internalIterationOnThread() {
smallListOfNumbers.parallelStream().forEach(
(Integer s) -> {
try {
/*
* DANGEROUS
* This will tell you that if all the 7 FJP(Fork join pool) worker threads are blocked for one single thread (e.g. t1),
* then other normal three(t2 - t4) thread wont execute, will wait for FJP worker threads.
*/
Thread.sleep(100); //Have a breakpoint here.
} catch (Exception e) {
e.printStackTrace();
}
}
);
}
}