Math to convert seconds since 1970 into date and vice versa
The Single Unix Specification gives a formula for Seconds since the Epoch:
A value that approximates the number of seconds that have elapsed since the Epoch. A Coordinated Universal Time name (specified in terms of seconds (tm_sec), minutes (tm_min), hours (tm_hour), days since January 1 of the year (tm_yday), and calendar year minus 1900 (tm_year)) is related to a time represented as seconds since the Epoch, according to the expression below.
If the year is <1970 or the value is negative, the relationship is undefined. If the year is >=1970 and the value is non-negative, the value is related to a Coordinated Universal Time name according to the C-language expression, where tm_sec, tm_min, tm_hour, tm_yday, and tm_year are all integer types:
tm_sec + tm_min*60 + tm_hour*3600 + tm_yday*86400 + (tm_year-70)*31536000 + ((tm_year-69)/4)*86400 - ((tm_year-1)/100)*86400 + ((tm_year+299)/400)*86400The relationship between the actual time of day and the current value for seconds since the Epoch is unspecified.
How any changes to the value of seconds since the Epoch are made to align to a desired relationship with the current actual time is implementation-defined. As represented in seconds since the Epoch, each and every day shall be accounted for by exactly 86400 seconds.
Note: The last three terms of the expression add in a day for each year that follows a leap year starting with the first leap year since the Epoch. The first term adds a day every 4 years starting in 1973, the second subtracts a day back out every 100 years starting in 2001, and the third adds a day back in every 400 years starting in 2001. The divisions in the formula are integer divisions; that is, the remainder is discarded leaving only the integer quotient.
You'll need to convert month and day of month to tm_yday to use this formula and that too should be done taking into account leap years. The rest in the formula is trivial.
Try to figure out from this how to get back date and time from seconds.
EDIT:
I've implemented a convertor in integer arithmetic in this answer.
See a test run at ideone.
New answer for old question:
Rationale for this new answer: The existing answers either do not show the algorithms for the conversion from nanoseconds to year/month/day (e.g. they use libraries with the source hidden), or they use iteration in the algorithms they do show.
This answer has no iteration whatsoever.
The algorithms are here, and explained in excruciating detail. They are also unit tested for correctness over a span of +/- a million years (way more than you need).
The algorithms don't count leap seconds. If you need that, it can be done, but requires a table lookup, and that table grows with time.
The date algorithms deal only with units of days, and not nanoseconds. To convert days to nanoseconds, multiply by 86400*1000000000 (taking care to ensure you're using 64 bit arithmetic). To convert nanoseconds to days, divide by the same amount. Or better yet, use the C++11 <chrono> library.
There are three date algorithms from this paper that are needed to answer this question.
1. days_from_civil:
// Returns number of days since civil 1970-01-01. Negative values indicate
// days prior to 1970-01-01.
// Preconditions: y-m-d represents a date in the civil (Gregorian) calendar
// m is in [1, 12]
// d is in [1, last_day_of_month(y, m)]
// y is "approximately" in
// [numeric_limits<Int>::min()/366, numeric_limits<Int>::max()/366]
// Exact range of validity is:
// [civil_from_days(numeric_limits<Int>::min()),
// civil_from_days(numeric_limits<Int>::max()-719468)]
template <class Int>
constexpr
Int
days_from_civil(Int y, unsigned m, unsigned d) noexcept
{
static_assert(std::numeric_limits<unsigned>::digits >= 18,
"This algorithm has not been ported to a 16 bit unsigned integer");
static_assert(std::numeric_limits<Int>::digits >= 20,
"This algorithm has not been ported to a 16 bit signed integer");
y -= m <= 2;
const Int era = (y >= 0 ? y : y-399) / 400;
const unsigned yoe = static_cast<unsigned>(y - era * 400); // [0, 399]
const unsigned doy = (153*(m + (m > 2 ? -3 : 9)) + 2)/5 + d-1; // [0, 365]
const unsigned doe = yoe * 365 + yoe/4 - yoe/100 + doy; // [0, 146096]
return era * 146097 + static_cast<Int>(doe) - 719468;
}
2. civil_from_days:
// Returns year/month/day triple in civil calendar
// Preconditions: z is number of days since 1970-01-01 and is in the range:
// [numeric_limits<Int>::min(), numeric_limits<Int>::max()-719468].
template <class Int>
constexpr
std::tuple<Int, unsigned, unsigned>
civil_from_days(Int z) noexcept
{
static_assert(std::numeric_limits<unsigned>::digits >= 18,
"This algorithm has not been ported to a 16 bit unsigned integer");
static_assert(std::numeric_limits<Int>::digits >= 20,
"This algorithm has not been ported to a 16 bit signed integer");
z += 719468;
const Int era = (z >= 0 ? z : z - 146096) / 146097;
const unsigned doe = static_cast<unsigned>(z - era * 146097); // [0, 146096]
const unsigned yoe = (doe - doe/1460 + doe/36524 - doe/146096) / 365; // [0, 399]
const Int y = static_cast<Int>(yoe) + era * 400;
const unsigned doy = doe - (365*yoe + yoe/4 - yoe/100); // [0, 365]
const unsigned mp = (5*doy + 2)/153; // [0, 11]
const unsigned d = doy - (153*mp+2)/5 + 1; // [1, 31]
const unsigned m = mp + (mp < 10 ? 3 : -9); // [1, 12]
return std::tuple<Int, unsigned, unsigned>(y + (m <= 2), m, d);
}
3. weekday_from_days:
// Returns day of week in civil calendar [0, 6] -> [Sun, Sat]
// Preconditions: z is number of days since 1970-01-01 and is in the range:
// [numeric_limits<Int>::min(), numeric_limits<Int>::max()-4].
template <class Int>
constexpr
unsigned
weekday_from_days(Int z) noexcept
{
return static_cast<unsigned>(z >= -4 ? (z+4) % 7 : (z+5) % 7 + 6);
}
These algorithms are written for C++14. If you have C++11, remove the constexpr. If you have C++98/03, remove the constexpr, the noexcept, and the static_asserts.
Note the lack of iteration in any of these three algorithms.
They can be used like this:
#include <iostream>
int
main()
{
int64_t z = days_from_civil(2015LL, 8, 22);
int64_t ns = z*86400*1000000000;
std::cout << ns << '\n';
const char* weekdays[] = {"Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"};
unsigned wd = weekday_from_days(z);
int64_t y;
unsigned m, d;
std::tie(y, m, d) = civil_from_days(ns/86400/1000000000);
std::cout << y << '-' << m << '-' << d << ' ' << weekdays[wd] << '\n';
}
which outputs:
1440201600000000000
2015-8-22 Sat
The algorithms are in the public domain. Use them however you want. The date algorithms paper has several more useful date algorithms if needed (e.g. weekday_difference is both remarkably simple and remarkably useful).
These algorithms are wrapped up in an open source, cross platform, type-safe date library if needed.
If timezone or leap second support is needed, there exists a timezone library built on top of the date library.
Update: Different local zones in same app
See how to convert among different time zones.
Update: Are there any pitfalls to ignoring leap seconds when doing date calculations in this manner?
This is a good question from the comments below.
Answer: There are some pitfalls. And there are some benefits. It is good to know what they both are.
Almost every source of time from an OS is based on Unix Time. Unix Time is a count of time since 1970-01-01 excluding leap seconds. This includes functions like the C time(nullptr) and the C++ std::chrono::system_clock::now(), as well as the POSIX gettimeofday and clock_gettime. This is not a fact specified by the standard (except it is specified by POSIX), but it is the de facto standard.
So if your source of seconds (nanoseconds, whatever) neglects leap seconds, it is exactly correct to ignore leap seconds when converting to field types such as {year, month, day, hours, minutes, seconds, nanoseconds}. In fact to take leap seconds into account in such a context would actually introduce errors.
So it is good to know your source of time, and especially to know if it also neglects leap seconds as Unix Time does.
If your source of time does not neglect leap seconds, you can still get the correct answer down to the second. You just need to know the set of leap seconds that have been inserted. Here is the current list.
For example if you get a count of seconds since 1970-01-01 00:00:00 UTC which includes leap seconds and you know that this represents "now" (which is currently 2016-09-26), the current number of leap seconds inserted between now and 1970-01-01 is 26. So you could subtract 26 from your count, and then follow these algorithms, getting the exact result.
This library can automate leap-second-aware computations for you. For example to get the number of seconds between 2016-09-26 00:00:00 UTC and 1970-01-01 00:00:00 UTC including leap seconds, you could do this:
#include "date/tz.h"
#include <iostream>
int
main()
{
using namespace date;
auto now = clock_cast<utc_clock>(sys_days{2016_y/September/26});
auto then = clock_cast<utc_clock>(sys_days{1970_y/January/1});
std::cout << now - then << '\n';
}
which outputs:
1474848026s
Neglecting leap seconds (Unix Time) looks like:
#include "date/date.h"
#include <iostream>
int
main()
{
using namespace date;
using namespace std::chrono_literals;
auto now = sys_days{2016_y/September/26} + 0s;
auto then = sys_days{1970_y/January/1};
std::cout << now - then << '\n';
}
which outputs:
1474848000s
For a difference of 26s.
This upcoming New Years (2017-01-01) we will insert the 27th leap second.
Between 1958-01-01 and 1970-01-01 10 "leap seconds" were inserted, but in units smaller than a second, and not just at the end of Dec or Jun. Documentation on exactly how much time was inserted and exactly when is sketchy, and I have not been able to track down a reliable source.
Atomic time keeping services began experimentally in 1955, and the first atomic-based international time standard TAI has an epoch of 1958-01-01 00:00:00 GMT (what is now UTC). Prior to that the best we had was quartz-based clocks which were not accurate enough to worry about leap seconds.
This code works...
Usage: uint32_t getSecsSinceEpoch(1970, month, day, years_since_epoch, hour, minute, second);
Example: timestamp = getSecsSinceEpoch(1970, 6, 12, (2014 - 1970), 15, 29, 0)
Returns: 1402586940
You can verify at www.epochconverter.com.
Took about 20 mins to write it and most of that was spent arguing with a friend as to whether I should include leap-seconds, nano-seconds, etc. Blech.
Have fun...
Dr. Bryan Wilcutt
#define DAYSPERWEEK (7)
#define DAYSPERNORMYEAR (365U)
#define DAYSPERLEAPYEAR (366U)
#define SECSPERDAY (86400UL) /* == ( 24 * 60 * 60) */
#define SECSPERHOUR (3600UL) /* == ( 60 * 60) */
#define SECSPERMIN (60UL) /* == ( 60) */
#define LEAPYEAR(year) (!((year) % 4) && (((year) % 100) || !((year) % 400)))
const int _ytab[2][12] = {
{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31},
{31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}
};
/****************************************************
* Class:Function : getSecsSomceEpoch
* Input : uint16_t epoch date (ie, 1970)
* Input : uint8 ptr to returned month
* Input : uint8 ptr to returned day
* Input : uint8 ptr to returned years since Epoch
* Input : uint8 ptr to returned hour
* Input : uint8 ptr to returned minute
* Input : uint8 ptr to returned seconds
* Output : uint32_t Seconds between Epoch year and timestamp
* Behavior :
*
* Converts MM/DD/YY HH:MM:SS to actual seconds since epoch.
* Epoch year is assumed at Jan 1, 00:00:01am.
****************************************************/
uint32_t getSecsSinceEpoch(uint16_t epoch, uint8_t month, uint8_t day, uint8_t years, uint8_t hour, uint8_t minute, uint8_t second)
{
unsigned long secs = 0;
int countleap = 0;
int i;
int dayspermonth;
secs = years * (SECSPERDAY * 365);
for (i = 0; i < (years - 1); i++)
{
if (LEAPYEAR((epoch + i)))
countleap++;
}
secs += (countleap * SECSPERDAY);
secs += second;
secs += (hour * SECSPERHOUR);
secs += (minute * SECSPERMIN);
secs += ((day - 1) * SECSPERDAY);
if (month > 1)
{
dayspermonth = 0;
if (LEAPYEAR((epoch + years))) // Only counts when we're on leap day or past it
{
if (month > 2)
{
dayspermonth = 1;
} else if (month == 2 && day >= 29) {
dayspermonth = 1;
}
}
for (i = 0; i < month - 1; i++)
{
secs += (_ytab[dayspermonth][i] * SECSPERDAY);
}
}
return secs;
}
Depends on which time you want gmtime or localtime then just read the struct_tm