Mount remote directory using SSH

First install the module:

sudo apt-get install sshfs

Load it to kernel:

sudo modprobe fuse

Setting permissions (Ubuntu versions < 16.04):

sudo adduser $USER fuse
sudo chown root:fuse /dev/fuse
sudo chmod +x /dev/fusermount

Now we'll create a directory to mount the remote folder in.

I chose to create it in my home directory and call it remoteDir.

mkdir ~/remoteDir

Now I ran the command to mount it (mount on home):

sshfs [email protected]:/home/maythuxServ/Mounted ~/remoteDir

Now it should be mounted:

cd ~/remoteDir
ls -l

Configure ssh key-based authentication

Generate key pair on the local host.

$ ssh-keygen -t rsa

Accept all sugestions with enter key.

Copy public key to the remote host:

$ ssh-copy-id -i .ssh/id_rsa.pub user@host

Install sshfs

$ sudo apt install sshfs

Mount remote directory

$ sshfs user@host:/remote_directory /local_directory

Don't try to add remote fs to /etc/fstab

Or don't try to mount shares via /etc/rc.local .

In both cases it won't work as the network is not available when init reads /etc/fstab.

Install AutoFS

$ sudo apt install autofs

Edit /etc/auto.master

Comment out the following lines

#+/etc/auto.master.d
#+/etc/auto.master

Add a new line

/- /etc/auto.sshfs --timeout=30

Save and quit

Edit /etc/auto.sshfs

Add a new line

/local_directory -fstype=fuse,allow_other,IdentityFile=/local_private_key :sshfs\#user@remote_host\:/remote_directory

Remote user name is obligatory.

Save and quit

Start autofs in debug mode

$ sudo service autofs stop
$ sudo automount -vf

Observe logs of the remote ssh server

$ ssh user@remote_server
$ sudo tailf /var/log/secure

Check content of the local directory

You should see contents of the remote directory

Start autofs in normal mode

Stop AutoFS running in debug mode with CTRL-C .

Start AutoFS in normal mode

$ sudo service autofs start

Enjoy

(Tested on Ubuntu 14.04)

Based on my experiments, explicitly creating the fuse group and adding your user to it is NOT required to mount ssh file system.

To summarize, here are the steps copied from this page:

1. Install sshfs

$ sudo apt-get install sshfs

2.Create local mount point

$ mkdir /home/johndoe/sshfs-path/

3.Mount remote folder /remote/path to /home/johndoe/sshfs-path/

$ sshfs [email protected]:/remote/path /home/johndoe/sshfs-path/

4. And finally, to umount ...

$ fusermount -u /home/johndoe/sshfs-path/