Shadow space example
The shadow space must be provided directly previous to the call. Imagine the shadow space as a relic from the old stdcall/cdecl convention: For WriteFile
you needed five pushes. The shadow space stands for the last four pushes (the first four arguments). Now you need four registers, the shadow space (just the space, contents don't matter) and one value on the stack after the shadow space (which is in fact the first push). Currently the return address to the caller (start
) is in the space that WriteFile
will use as shadow space -> crash.
You can create a new shadow space for the WinAPI functions (GetStdHandle
and WriteConsoleA
) inside the function write
:
write:
push rbp
mov rbp, rsp
sub rsp, (16 + 32) ; 5th argument of WriteConsoleA (8) + Shadow space (32)
; plus another 8 to make it a multiple of 16 (to keep stack aligned after one push aligned it after function entry)
mov [rbp+16],rcx ; <-- use our Shadow space, provided by `start`
mov [rbp+24],rdx ; <-- and again, to save our incoming args
mov rcx, -11 ; Get handle to StdOut
call GetStdHandle
mov rcx,rax ; hConsoleOutput
mov rdx, [rbp+16] ; lpBuffer ; reloaded saved copy of register arg
mov r8, [rbp+24] ; nNumberOfCharsToWrite
mov r9,empty ; lpNumberOfCharsWritten
mov qword [rsp+32],0 ; lpReserved - 5th argument directly behind the shadow space
call WriteConsoleA
leave
ret
For completeness, I am posting this here as this is what I have ended up on. This works perfectly and as far as I can see, barring the UNWIND_INFO
/Exception Handling requirements of x64 ASM on Windows, this is pretty much spot on. The comments are hopefully accurate too.
EDIT:
This is now updated after Raymonds comment below. I removed the preservation of rbp
because it wasn't required and threw my stack alignment out further than I intended.
; Windows APIs
; GetStdHandle
; ------------
; HANDLE WINAPI GetStdHandle(
; _In_ DWORD nStdHandle
; );
extern GetStdHandle
; WriteFile
; ------------
; BOOL WINAPI WriteFile(
; _In_ HANDLE hFile,
; _In_ LPCVOID lpBuffer,
; _In_ DWORD nNumberOfBytesToWrite,
; _Out_opt_ LPDWORD lpNumberOfBytesWritten,
; _Inout_opt_ LPOVERLAPPED lpOverlapped
; );
extern WriteFile
; ExitProcess
; -----------
; VOID WINAPI ExitProcess(
; _In_ UINT uExitCode
; );
extern ExitProcess
global start
section .data
STD_OUTPUT_HANDLE equ -11
NULL equ 0
msg1 db "Hello ", 0
msg1.len equ $-msg1
msg2 db "World!", 10, 0
msg2.len equ $-msg2
section .bss
empty resd 1
section .text
start:
sub rsp,0x28 ; Allocate 32 bytes of Shadow Space + align it to 16 bytes (8 byte return address already on stack, so 8 + 40 = 16*3)
mov rcx,msg1
mov rdx,msg1.len
call write
mov rcx,msg2
mov rdx,msg2.len
call write
mov rcx,NULL
call ExitProcess
add rsp,0x28 ; Restore the stack pointer before exiting
ret
write:
; Allocate another 40 bytes of stack space (the return address makes 48 total). Its 32
; bytes of Shadow Space for the WinAPI calls + 8 more bytes for the fifth argument
; to the WriteFile API call.
sub rsp,0x28
mov [rsp+0x30],rcx ; Argument 1 is 48 bytes back in the stack (40 for Shadow Space above, 8 for return address)
mov [rsp+0x38],rdx ; Argument 2 is just after Argument 1
mov rcx,STD_OUTPUT_HANDLE ; Get handle to StdOut
call GetStdHandle
mov rcx,rax ; hFile
mov rdx,[rsp+0x30] ; lpBuffer
mov r8,[rsp+0x38] ; nNumberOfBytesToWrite
mov r9,empty ; lpNumberOfBytesWritten
; Move the 5th argument directly behind the Shadow Space
mov qword [rsp+0x20],0 ; lpOverlapped, Argument 5 (just after the Shadow Space 32 bytes back)
call WriteFile
add rsp,0x28 ; Restore the stack pointer (remove the Shadow Space)
ret
Which results in...: