TCP Hole Punch (NAT Traversal) Library or something?

In each network scenario, TCP hole punching operates in a similar way to UDP hole punching. For example, if two peers A and B are behind different NATs, each peer’s first SYN packet sent to the other peer opens up a hole associated with its public address in its respective NAT. If A’s first SYN packet to B reaches B’s NAT before B’s first SYN packet to A reaches B’s NAT, B’s NAT considers A’s SYN packet unsolicited and drops it. However, subsequently B’s first SYN packet can travel through A’s NAT successfully because A’s NAT recognises B’s public address as the destination of the outgoing session that A has initiated.

So yes. It's possible to TCP holepunch. I don't see why anyone would think otherwise.

Also, could you not create this type of bahaviour manually? It doesn't need to depend on any specific protocol as long as the steps are the same to gather all of the required information.

In general, TCP hole punching (3.2.1) proceeds as follows:

Clients: A, B Server: S

• A uses its connection with S to ask S for a connection with B. • S replies to A with B’s private and public addresses, and simultaneously sends A’s addresses to B.

• A and B asynchronously make outgoing connection at- tempts (send SYN packets) to each other’s public and private addresses, from the same port that they used to register with S. At the same time, they listen for TCP incoming connection attempts on their local TCP ports.

• A and B wait for a SYN-ACK response to their out- going SYN packets, or an incoming connection request (SYN packet). If a connection fails, the peer can retry it up to a maximum timeout period.

• Once the three-way handshake process has completed, the peers authenticate each other. If the authentica- tion fails, the peers close that connection and wait until another connection is successfully authenticated. The first successfully authenticated connection will be used to transfer TCP data.

(I know this isn't much of an answer but there wasn't enough room for a comment).


The question is quite old but for anyone looking at an alternate solution for NAT Traversal, you should take a look at the Open.NAT project. It's really easy to use and work with both UPNP and PMP, but it's different than Hole Punching.

Let's say that you want to forward external Port 1700 to local port 1600, all you have to do is:

var discoverer = new NatDiscoverer();
var device = await discoverer.DiscoverDeviceAsync();
await device.CreatePortMapAsync(new Mapping(Protocol.Tcp, 1600, 1700, "The mapping name"));

You can also list all existing mappings, so you can validate that your port is not already used.

var sb = new StringBuilder();
var ip = await device.GetExternalIPAsync();

sb.AppendFormat("\nAdded mapping: {0}:1700 -> 127.0.0.1:1600\n", ip);
sb.AppendFormat("\n+------+-------------------------------+--------------------------------+------------------------------------+-------------------------+");
sb.AppendFormat("\n| PROT | PUBLIC (Reacheable)           | PRIVATE (Your computer)        | Descriptopn                        |                         |");
sb.AppendFormat("\n+------+----------------------+--------+-----------------------+--------+------------------------------------+-------------------------+");
sb.AppendFormat("\n|      | IP Address           | Port   | IP Address            | Port   |                                    | Expires                 |");
sb.AppendFormat("\n+------+----------------------+--------+-----------------------+--------+------------------------------------+-------------------------+");
foreach (var mapping in await device.GetAllMappingsAsync())
{
    sb.AppendFormat("\n|  {5} | {0,-20} | {1,6} | {2,-21} | {3,6} | {4,-35}|{6,25}|",
        ip, mapping.PublicPort, mapping.PrivateIP, mapping.PrivatePort, mapping.Description, mapping.Protocol == Protocol.Tcp ? "TCP" : "UDP", mapping.Expiration.ToLocalTime());
}
sb.AppendFormat("\n+------+----------------------+--------+-----------------------+--------+------------------------------------+-------------------------+");
Console.WriteLine(sb.ToString());

There is also a blog post about NAT Traversal on MSDN: https://blogs.msdn.microsoft.com/ncl/2009/07/27/end-to-end-connectivity-with-nat-traversal/


We put together a library called IceLink that does P2P streaming using ICE/STUN/TURN with full NAT traversal. STUN-based hole-punching works for the majority of routers to establish a direct connection between peers, and for the "bad" routers out there, the connection falls back to a TURN-based relay.

Tags:

C#

Tcp

Nat