Optimize GROUP BY query to retrieve latest row per user
Perhaps a different index on the table would help. Try this one: log(user_id, log_date). I am not positive that Postgres will make optimal use with distinct on.
So, I would stick with that index and try this version:
select *
from log l
where not exists (select 1
from log l2
where l2.user_id = l.user_id and
l2.log_date <= :mydate and
l2.log_date > l.log_date
);
This should replace the sorting/grouping with index look ups. It might be faster.
This is not a standalone answer but rather a comment to @Erwin's answer. For 2a, the lateral join example, the query can be improved by sorting the users table to exploit the locality of the index on log.
SELECT u.user_id, l.log_date, l.payload
FROM (SELECT user_id FROM users ORDER BY user_id) u,
LATERAL (SELECT log_date, payload
FROM log
WHERE user_id = u.user_id -- lateral reference
AND log_date <= :mydate
ORDER BY log_date DESC NULLS LAST
LIMIT 1) l;
The rationale is that index lookup is expensive if user_id values are random. By sorting out user_id first, the subsequent lateral join would be like a simple scan on the index of log. Even though both query plans look alike, the running time would differ much especially for large tables.
The cost of the sorting is minimal especially if there is an index on the user_id field.
For best read performance you need a multicolumn index:
CREATE INDEX log_combo_idx
ON log (user_id, log_date DESC NULLS LAST);
To make index only scans possible, add the otherwise not needed column payload in a covering index with the INCLUDE clause (Postgres 11 or later):
CREATE INDEX log_combo_covering_idx
ON log (user_id, log_date DESC NULLS LAST) INCLUDE (payload);
See:
- Do covering indexes in PostgreSQL help JOIN columns?
Fallback for older versions:
CREATE INDEX log_combo_covering_idx
ON log (user_id, log_date DESC NULLS LAST, payload);
Why DESC NULLS LAST?
- Unused index in range of dates query
For few rows per user_id or small tables DISTINCT ON is typically fastest and simplest:
- Select first row in each GROUP BY group?
For many rows per user_id an index skip scan (or loose index scan) is (much) more efficient. That's not implemented up to Postgres 12 - work is ongoing for Postgres 14. But there are ways to emulate it efficiently.
Common Table Expressions require Postgres 8.4+.LATERAL requires Postgres 9.3+.
The following solutions go beyond what's covered in the Postgres Wiki.
1. No separate table with unique users
With a separate users table, solutions in 2. below are typically simpler and faster. Skip ahead.
1a. Recursive CTE with LATERAL join
WITH RECURSIVE cte AS (
( -- parentheses required
SELECT user_id, log_date, payload
FROM log
WHERE log_date <= :mydate
ORDER BY user_id, log_date DESC NULLS LAST
LIMIT 1
)
UNION ALL
SELECT l.*
FROM cte c
CROSS JOIN LATERAL (
SELECT l.user_id, l.log_date, l.payload
FROM log l
WHERE l.user_id > c.user_id -- lateral reference
AND log_date <= :mydate -- repeat condition
ORDER BY l.user_id, l.log_date DESC NULLS LAST
LIMIT 1
) l
)
TABLE cte
ORDER BY user_id;
This is simple to retrieve arbitrary columns and probably best in current Postgres. More explanation in chapter 2a. below.
1b. Recursive CTE with correlated subquery
WITH RECURSIVE cte AS (
( -- parentheses required
SELECT l AS my_row -- whole row
FROM log l
WHERE log_date <= :mydate
ORDER BY user_id, log_date DESC NULLS LAST
LIMIT 1
)
UNION ALL
SELECT (SELECT l -- whole row
FROM log l
WHERE l.user_id > (c.my_row).user_id
AND l.log_date <= :mydate -- repeat condition
ORDER BY l.user_id, l.log_date DESC NULLS LAST
LIMIT 1)
FROM cte c
WHERE (c.my_row).user_id IS NOT NULL -- note parentheses
)
SELECT (my_row).* -- decompose row
FROM cte
WHERE (my_row).user_id IS NOT NULL
ORDER BY (my_row).user_id;
Convenient to retrieve a single column or the whole row. The example uses the whole row type of the table. Other variants are possible.
To assert a row was found in the previous iteration, test a single NOT NULL column (like the primary key).
More explanation for this query in chapter 2b. below.
Related:
- Query last N related rows per row
- GROUP BY one column, while sorting by another in PostgreSQL
2. With separate users table
Table layout hardly matters as long as exactly one row per relevant user_id is guaranteed. Example:
CREATE TABLE users (
user_id serial PRIMARY KEY
, username text NOT NULL
);
Ideally, the table is physically sorted in sync with the log table. See:
- Optimize Postgres timestamp query range
Or it's small enough (low cardinality) that it hardly matters. Else, sorting rows in the query can help to further optimize performance. See Gang Liang's addition. If the physical sort order of the users table happens to match the index on log, this may be irrelevant.
2a. LATERAL join
SELECT u.user_id, l.log_date, l.payload
FROM users u
CROSS JOIN LATERAL (
SELECT l.log_date, l.payload
FROM log l
WHERE l.user_id = u.user_id -- lateral reference
AND l.log_date <= :mydate
ORDER BY l.log_date DESC NULLS LAST
LIMIT 1
) l;
JOIN LATERAL allows to reference preceding FROM items on the same query level. See:
- What is the difference between LATERAL JOIN and a subquery in PostgreSQL?
Results in one index (-only) look-up per user.
Returns no row for users missing in the users table. Typically, a foreign key constraint enforcing referential integrity would rule that out.
Also, no row for users without matching entry in log - conforming to the original question. To keep those users in the result use LEFT JOIN LATERAL ... ON true instead of CROSS JOIN LATERAL:
- Call a set-returning function with an array argument multiple times
Use LIMIT n instead of LIMIT 1 to retrieve more than one rows (but not all) per user.
Effectively, all of these do the same:
JOIN LATERAL ... ON true
CROSS JOIN LATERAL ...
, LATERAL ...
The last one has lower priority, though. Explicit JOIN binds before comma. That subtle difference can matters with more join tables. See:
- "invalid reference to FROM-clause entry for table" in Postgres query
2b. Correlated subquery
Good choice to retrieve a single column from a single row. Code example:
- Optimize groupwise maximum query
The same is possible for multiple columns, but you need more smarts:
CREATE TEMP TABLE combo (log_date date, payload int);
SELECT user_id, (combo1).* -- note parentheses
FROM (
SELECT u.user_id
, (SELECT (l.log_date, l.payload)::combo
FROM log l
WHERE l.user_id = u.user_id
AND l.log_date <= :mydate
ORDER BY l.log_date DESC NULLS LAST
LIMIT 1) AS combo1
FROM users u
) sub;
Like LEFT JOIN LATERAL above, this variant includes all users, even without entries in log. You get NULL for combo1, which you can easily filter with a WHERE clause in the outer query if need be.
Nitpick: in the outer query you can't distinguish whether the subquery didn't find a row or all column values happen to be NULL - same result. You need a NOT NULL column in the subquery to avoid this ambiguity.
A correlated subquery can only return a single value. You can wrap multiple columns into a composite type. But to decompose it later, Postgres demands a well-known composite type. Anonymous records can only be decomposed providing a column definition list.
Use a registered type like the row type of an existing table. Or register a composite type explicitly (and permanently) with CREATE TYPE. Or create a temporary table (dropped automatically at end of session) to register its row type temporarily. Cast syntax: (log_date, payload)::combo
Finally, we do not want to decompose combo1 on the same query level. Due to a weakness in the query planner this would evaluate the subquery once for each column (still true in Postgres 12). Instead, make it a subquery and decompose in the outer query.
Related:
- Get values from first and last row per group
Demonstrating all 4 queries with 100k log entries and 1k users:
db<>fiddle here - pg 11
Old sqlfiddle