QGIS live GPS tracking /recommended hardware (GPS USB stick)

So because neither a list nor any recommendations seem to exist, here is my (one-point item at this moment) gps device recommendations list representing the empirical research effort of last weekend.

The device mentioned in my comment above works absolutely well and straightforward:

1) Windows 10 recognizes and installs the device automatically. No driver setup needed:

2) My first disappointment, that this thing does not work at all was unfounded, because ...

At first sight I expected the cut edge of the label to flash, but here is only black plastique. Well, ok, the LED is not the lightest I've ever seen...

Ahead to the supplied GPSinfo software, selected COM4: port and 4800 BAUD (Ann.: BAUD is Bit/sec.), sat aquisition took less than 20 seconds:

And the last small step into QGIS GPS info window:

And the device was about €40.

I have had great success in using a Garmin GLO, it is a Bluetooth unit that is single frequency GPS/GLONASS. The unit that I use has a 10 HZ update rate, which produces very smooth lines, and great detail through curves.

Accuracy when comparing positions to points placed with Survey Grade RTK GPS units is usually under two meters with occasional flyers out to about 3.5 meters. The extreme errors could be attributed to working under a vegetation canopy.

The one thing I have noticed about most consumer grade GPS units is, they produce much better results if you are moving, even very slowly. Static accuracy tends to produce locations that bounce around quite a bit.

I have experimented with several other units, both Bluetooth, and USB, but I have yet to find any other unit that is a consistently reliable as the GLO so far.

I have not checked to see how well it works with Windows 10, but it has worked flawlessly with Windows 7, and Windows 8.1.

Setting up the Bluetooth connection was simple, and Windows recognized it immediately.

It is important to start the unit, and have Windows recognize it prior to starting QGIS, and the GPS Information Pane. If done this way, QGIS will have no problem finding it.