Random float number generation

rand() can be used to generate pseudo-random numbers in C++. In combination with RAND_MAX and a little math, you can generate random numbers in any arbitrary interval you choose. This is sufficient for learning purposes and toy programs. If you need truly random numbers with normal distribution, you'll need to employ a more advanced method.


This will generate a number from 0.0 to 1.0, inclusive.

float r = static_cast <float> (rand()) / static_cast <float> (RAND_MAX);

This will generate a number from 0.0 to some arbitrary float, X:

float r2 = static_cast <float> (rand()) / (static_cast <float> (RAND_MAX/X));

This will generate a number from some arbitrary LO to some arbitrary HI:

float r3 = LO + static_cast <float> (rand()) /( static_cast <float> (RAND_MAX/(HI-LO)));

Note that the rand() function will often not be sufficient if you need truly random numbers.


Before calling rand(), you must first "seed" the random number generator by calling srand(). This should be done once during your program's run -- not once every time you call rand(). This is often done like this:

srand (static_cast <unsigned> (time(0)));

In order to call rand or srand you must #include <cstdlib>.

In order to call time, you must #include <ctime>.


C++11 gives you a lot of new options with random. The canonical paper on this topic would be N3551, Random Number Generation in C++11

To see why using rand() can be problematic see the rand() Considered Harmful presentation material by Stephan T. Lavavej given during the GoingNative 2013 event. The slides are in the comments but here is a direct link.

I also cover boost as well as using rand since legacy code may still require its support.

The example below is distilled from the cppreference site and uses the std::mersenne_twister_engine engine and the std::uniform_real_distribution which generates numbers in the [0,10) interval, with other engines and distributions commented out (see it live):

#include <iostream>
#include <iomanip>
#include <string>
#include <map>
#include <random>

int main()
{
    std::random_device rd;

    //
    // Engines 
    //
    std::mt19937 e2(rd());
    //std::knuth_b e2(rd());
    //std::default_random_engine e2(rd()) ;

    //
    // Distribtuions
    //
    std::uniform_real_distribution<> dist(0, 10);
    //std::normal_distribution<> dist(2, 2);
    //std::student_t_distribution<> dist(5);
    //std::poisson_distribution<> dist(2);
    //std::extreme_value_distribution<> dist(0,2);

    std::map<int, int> hist;
    for (int n = 0; n < 10000; ++n) {
        ++hist[std::floor(dist(e2))];
    }

    for (auto p : hist) {
        std::cout << std::fixed << std::setprecision(1) << std::setw(2)
                  << p.first << ' ' << std::string(p.second/200, '*') << '\n';
    }
}

output will be similar to the following:

0 ****
1 ****
2 ****
3 ****
4 *****
5 ****
6 *****
7 ****
8 *****
9 ****

The output will vary depending on which distribution you choose, so if we decided to go with std::normal_distribution with a value of 2 for both mean and stddev e.g. dist(2, 2) instead the output would be similar to this (see it live):

-6 
-5 
-4 
-3 
-2 **
-1 ****
 0 *******
 1 *********
 2 *********
 3 *******
 4 ****
 5 **
 6 
 7 
 8 
 9 

The following is a modified version of some of the code presented in N3551 (see it live) :

#include <algorithm>
#include <array>
#include <iostream>
#include <random>

std::default_random_engine & global_urng( )
{
    static std::default_random_engine u{};
    return u ;
}

void randomize( )
{
    static std::random_device rd{};
    global_urng().seed( rd() );
}

int main( )
{
  // Manufacture a deck of cards:
  using card = int;
  std::array<card,52> deck{};
  std::iota(deck.begin(), deck.end(), 0);

  randomize( ) ;  

  std::shuffle(deck.begin(), deck.end(), global_urng());
  // Display each card in the shuffled deck:
  auto suit = []( card c ) { return "SHDC"[c / 13]; };
  auto rank = []( card c ) { return "AKQJT98765432"[c % 13]; };

  for( card c : deck )
      std::cout << ' ' << rank(c) << suit(c);

   std::cout << std::endl;
}

Results will look similar to:

5H 5S AS 9S 4D 6H TH 6D KH 2S QS 9H 8H 3D KC TD 7H 2D KS 3C TC 7D 4C QH QC QD JD AH JC AC KD 9D 5C 2H 4H 9C 8C JH 5D 4S 7C AD 3S 8S TS 2C 8D 3H 6C JS 7S 6S

Boost

Of course Boost.Random is always an option as well, here I am using boost::random::uniform_real_distribution:

#include <iostream>
#include <iomanip>
#include <string>
#include <map>
#include <boost/random/mersenne_twister.hpp>
#include <boost/random/uniform_real_distribution.hpp>

int main()
{
    boost::random::mt19937 gen;
    boost::random::uniform_real_distribution<> dist(0, 10);

    std::map<int, int> hist;
    for (int n = 0; n < 10000; ++n) {
        ++hist[std::floor(dist(gen))];
    }

    for (auto p : hist) {
        std::cout << std::fixed << std::setprecision(1) << std::setw(2)
                  << p.first << ' ' << std::string(p.second/200, '*') << '\n';
    }
}

rand()

If you must use rand() then we can go to the C FAQ for a guides on How can I generate floating-point random numbers? , which basically gives an example similar to this for generating an on the interval [0,1):

#include <stdlib.h>

double randZeroToOne()
{
    return rand() / (RAND_MAX + 1.);
}

and to generate a random number in the range from [M,N):

double randMToN(double M, double N)
{
    return M + (rand() / ( RAND_MAX / (N-M) ) ) ;  
}