raspberry pi wpa_supplicant boot code example
Example 1: raspberry pi set wifi headless
crate a file in the root folder of the sd card ("boot") called
wpa_supplicant.conf
===========contents of file:=================
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
country=
network={
ssid=""
psk=""
}
Example 2: raspberry pi wpa_supplicant
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
country=US
network={
ssid="Your network name/SSID"
psk="Your WPA/WPA2 security key"
key_mgmt=WPA-PSK
}
Example 3: raspberry pi wifi setup wpa_supplicant
Create a file in the root of boot called: wpa_supplicant.conf (instructions below). Then paste the following into it (adjusting for your ISO 3166 alpha-2 country code, network name and network password):
country=US
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
network={
ssid="NETWORK-NAME"
psk="NETWORK-PASSWORD"
}
Example 4: enable wifi raspberry pi headless
Make new file /boot/wpa_supplicant.conf:
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
country="{Your countries' ISO 3166-1 code}"
network={
ssid="{Name of Network}"
psk="{Password}"
}