Restricting dnsmasq's DHCP server to one interface
Solution 1:
For those who like me are confusing on why port 53 is still open for all interfaces regardless which option you put in to limit it. There is one more option that need to be turned on.
-z, --bind-interfaces
On systems which support it, dnsmasq binds the wildcard address, even when it is listening on only some interfaces. It then discards requests that it shouldn't reply to. This has the advantage of working even when interfaces come and go and change address. This option forces dnsmasq to really bind only the interfaces it is listening on. About the only time when this is useful is when running another nameserver (or another instance of dnsmasq) on the same machine. Setting this option also enables multiple instances of dnsmasq which provide DHCP service to run in the same machine.
Solution 2:
The man page explains it quite nicely. If it's just DHCP you don't want to run on wlan0
then you can use --no-dhcp-interface=wlan0
. If you don't want dnsmasq to listen at all on wlan0
then you can use --except-interface=wlan0
.
If you only want dnsmasq to listen on eth0
then you can use --interface=eth0
.
Solution 3:
This is also possible from the dnsmasq configuration file, and is documented in Simon Kelley's example file at http://www.thekelleys.org.uk/dnsmasq/docs/dnsmasq.conf.example:
# If you want dnsmasq to listen for DHCP and DNS requests only on
# specified interfaces (and the loopback) give the name of the
# interface (eg eth0) here.
# Repeat the line for more than one interface.
#interface=
# Or you can specify which interface _not_ to listen on
#except-interface=