Trying to discover iOS devices on my network using python script
What you're trying to do (a) probably can't be done, and (b) probably wouldn't be much use if it could.
The point of Bonjour is to discover services, not devices. Of course each service is provided by some device, so indirectly you can discover devices with it… but only by discovering a service that they're advertising.
As far as I know, (except Apple TVs) don't advertise any services, except while you're running an app that uses Bonjour to find the same app on other machines. (Except for jailbroken devices, which often advertise SSH, AFP, etc.)
There are a few ways to, indirectly, get a list of all services being advertised by anyone on the network. The simplest is probably to use Bonjour Browser for Windows. (I've never actually used it, but the original Mac tool and the Java port, both of which I have used, both suggest this Windows port for Windows users.) Fire it up and you'll get a list of services, and you can click on each one to get the details.
So, you can verify that your iPhone and iPad aren't advertising any services, which will show that there is no way to detect them via Bonjour.
Meanwhile, even if you did find a device, what are you planning to do? Presumably you want to communicate with the device in some way, right? Whatever service you're trying to communicate with… just browse for that service—and then, if appropriate, filter down to iOS devices. That's got to be easier than browsing for iOS devices and then filtering down to those that have the service you want.
As for whether there's any way to detect iOS devices… Well, there are at least two possibilities. I don't know if either of them will work, but…
First, even if the iOS device isn't advertising anything for you, I assume it's browsing for services you can advertise. How else does it find that there's an Apple TV to AirTunes to, an iTunes on the LAN to sync with, etc.?
So, use Bonjour Browser to get a list of all services your iTunes-running desktop, Apple TV, etc. are advertising. Then turn off all the services on your desktop, use PyBonjour to advertise whichever services seem plausibly relevant (and, if need be, use netcat to put trivial listeners on the ports you advertise). Then turn on your iPhone, and see if it connects to any of them. You may want to leave it running for a while, or switch WiFi off and back on. (I'm guessing that, despite Apple's recommendations, it doesn't browse continuously for most services, but just checks every once in a while and/or every time its network status changes. After all, Apple's recommendations are for foreground interactive apps, not background services.)
Unfortunately, even if you can find a service that all iOS devices will connect to, you may not be able to distinguish iOS devices from others just by getting connections there. For example, I'm pretty sure any Mac or Windows box running iTunes will hit up your fake AirTunes service, and any Mac will hit your AirPrint, and so on. So, how do you distinguish that from an iPhone hitting it? You may need to actually serve enough of the protocol to get information out of them. Which will be particularly difficult for Apple's undocumented protocols.
But hopefully you'll get lucky, and there will be something that all iOS devices, and nothing else, will want to talk to. iTunes Sync seems like the obvious possibility.
Alternatively, there are a few things they have to broadcast, or they just wouldn't work. You can't get on a WiFi network without broadcasts. And most home WiFi networks use DHCP, which means they have to broadcast DHCP discover (and request), as well. There may be some kind of heuristic signature you can detect in these messages. If nothing else, enabling DDNS should cause the device to send its hostname, and you can guess based on that (e.g., unless you change the defaults, hostname.lower().endswith('iphone')).
The easiest way is probably to set up your desktop as the main access point for your home network. I believe it's as simple as turning on Internet Connection Sharing somewhere in the control panel. (Setting up as a DHCP relay agent is much less overhead than being a full router, but I have no idea how you'd even get started doing that on Windows.) Then you can capture the DHCP broadcasts (or, failing that, the 802.11 broadcasts) as they come in. Wireshark will capture and parse the messages for you easily, so you can watch and see if it looks like this is worth pursuing farther. (See RFC 2131 for details on the format that aren't obvious from Wireshark's cryptic one-liner descriptions.)
You can take this even farther and watch the internet connections every host makes once they're connected to the internet. Any device that's periodically checking the App Store, the iOS upgrade server, etc.… Well, unless one of the jailbreak devteam guys lives in your house, that's probably an iPhone, right? The downside is that some of these checks may be very periodic, and detecting an iPhone 6 hours after it connects to your network isn't very exciting.
Use python-nmap rather than Bonjour. Or you could use pyzeroconf (Bonjour is an implementation of zeroconf) but it is a little outdated (but should still work).
python-nmap is probably easiest, let's suppose you wanted to find all connected devices that have 'iPhone' or 'iPad' in their hostname (just a simplistic concept):
import nmap
...
def notify_me(ip, hostname):
print("I found an iOS device! IP Address: %s, Hostname: %s" % (ip, hostname))
iOS_device_list = ['iPhone', 'iPad']
iOS_devices_on_net = {}
nm = nmap.PortScanner()
# scan ip range
for i in range(2, 50, 1):
ip = "192.168.1." + str(i)
# specify ports to scan
nm.scan(ip, '62078') # Matt mentioned that it picks up iphone-sync on this port
hostname = nm[ip].hostname()
for device in iOS_device_list:
if device.lower() in hostname.lower():
iOS_devices_on_net.update({ip:hostname})
notify_me(ip, hostname)
# show all iOS devices in ip range
print iOS_devices_on_net
The limitation of this approach is that it relies on the individual having not changed their hostname which originally includes their name and device name. It also assumes that there is a port listening on the iOS device that will return a hostname (this may not be the case). You can use osscan which is preferred by running it as a command using python-nmap library. This is obviously a much better approach. My concept above is just a simple example of how it can be used.
Using nmap from the command line (I believe python-nmap has nm.commandline() method) is simplest:
nmap -O -v ip
Also try adding --osscan-guess; --fuzzy for best results. Example:
nmap -O -v --osscan-guess ip
Then just search the output for iOS device keywords (see this example). It's human-readable. Note that you'll need to be running all of this as an administrator for it to work properly (Windows: runas, other: sudo).