Visual Studio 2017 HRESULT: 0x80070005 / E_ACCESSDENIED on project creation

I had the same error. I solved it by following the procedure :

  • Shutdown all instances of Visual Studio
  • Delete %LocalAppData%\Microsoft\VisualStudio\15.0_f4938f75\privateregistry.bin file (the ID after 15.0_ may be different per machines)
  • Start VS as normal user

all credit for this should go to https://developercommunity.visualstudio.com/content/problem/31188/access-denied-error-1.html


Ok, I fixed it. Long story short, the reason for the problem was an incomplete and/or corrupted setup.

But it was a rather bumpy road to the solution, including several un-installations and re-installations until I eventually figured out why the setup was indeed faulty.

Sometimes I got an exception during the installation, other times it finished just fine, but the HRESULT-error persisted when I tried to create a new project.

I my special case, this was caused by the corporate firewall, that blocked some of the setup packets from being downloaded by the web installer. I solved the issue by connecting to an open WiFi, that's not filtered by the firewall.

As I'm working with a standard user, UAC kicks in when I start any installation routine. When I first started the setup via UAC and connected to the free WiFi, it wasn't able to find the packet servers. It took me a minute to realize that the admin user I used for UAC had his own internet proxy settings, that wouldn't work with the open WiFi.

After I logged on as administrator, disabled the proxy and logged on as my main user again, I ran the setup again - and it failed again with a bunch of "incomplete workload" messages. As frustrated as I was at this point, I simply ran it again via the "Change" button without even closing the webinstaller and this time it finally completed without any errors!

After this, I could start VS just normally and creation of a new project was possible.

So, if you experiencing any troubles like this, I would strongly recommend to run a "Repair" or "Change" installation just over your existing one but try to avoid any firewalls between you and the internet.