What are bitwise shift (bit-shift) operators and how do they work?

Bit Masking & Shifting

Bit shifting is often used in low-level graphics programming. For example, a given pixel color value encoded in a 32-bit word.

 Pixel-Color Value in Hex:    B9B9B900
 Pixel-Color Value in Binary: 10111001  10111001  10111001  00000000

For better understanding, the same binary value labeled with what sections represent what color part.

                                 Red     Green     Blue       Alpha
 Pixel-Color Value in Binary: 10111001  10111001  10111001  00000000

Let's say for example we want to get the green value of this pixel's color. We can easily get that value by masking and shifting.

Our mask:

                  Red      Green      Blue      Alpha
 color :        10111001  10111001  10111001  00000000
 green_mask  :  00000000  11111111  00000000  00000000

 masked_color = color & green_mask

 masked_color:  00000000  10111001  00000000  00000000

The logical & operator ensures that only the values where the mask is 1 are kept. The last thing we now have to do, is to get the correct integer value by shifting all those bits to the right by 16 places (logical right shift).

 green_value = masked_color >>> 16

Et voilà, we have the integer representing the amount of green in the pixel's color:

 Pixels-Green Value in Hex:     000000B9
 Pixels-Green Value in Binary:  00000000 00000000 00000000 10111001
 Pixels-Green Value in Decimal: 185

This is often used for encoding or decoding image formats like jpg, png, etc.


The bit shifting operators do exactly what their name implies. They shift bits. Here's a brief (or not-so-brief) introduction to the different shift operators.

The Operators

  • >> is the arithmetic (or signed) right shift operator.
  • >>> is the logical (or unsigned) right shift operator.
  • << is the left shift operator, and meets the needs of both logical and arithmetic shifts.

All of these operators can be applied to integer values (int, long, possibly short and byte or char). In some languages, applying the shift operators to any datatype smaller than int automatically resizes the operand to be an int.

Note that <<< is not an operator, because it would be redundant.

Also note that C and C++ do not distinguish between the right shift operators. They provide only the >> operator, and the right-shifting behavior is implementation defined for signed types. The rest of the answer uses the C# / Java operators.

(In all mainstream C and C++ implementations including GCC and Clang/LLVM, >> on signed types is arithmetic. Some code assumes this, but it isn't something the standard guarantees. It's not undefined, though; the standard requires implementations to define it one way or another. However, left shifts of negative signed numbers is undefined behaviour (signed integer overflow). So unless you need arithmetic right shift, it's usually a good idea to do your bit-shifting with unsigned types.)


Left shift (<<)

Integers are stored, in memory, as a series of bits. For example, the number 6 stored as a 32-bit int would be:

00000000 00000000 00000000 00000110

Shifting this bit pattern to the left one position (6 << 1) would result in the number 12:

00000000 00000000 00000000 00001100

As you can see, the digits have shifted to the left by one position, and the last digit on the right is filled with a zero. You might also note that shifting left is equivalent to multiplication by powers of 2. So 6 << 1 is equivalent to 6 * 2, and 6 << 3 is equivalent to 6 * 8. A good optimizing compiler will replace multiplications with shifts when possible.

Non-circular shifting

Please note that these are not circular shifts. Shifting this value to the left by one position (3,758,096,384 << 1):

11100000 00000000 00000000 00000000

results in 3,221,225,472:

11000000 00000000 00000000 00000000

The digit that gets shifted "off the end" is lost. It does not wrap around.


Logical right shift (>>>)

A logical right shift is the converse to the left shift. Rather than moving bits to the left, they simply move to the right. For example, shifting the number 12:

00000000 00000000 00000000 00001100

to the right by one position (12 >>> 1) will get back our original 6:

00000000 00000000 00000000 00000110

So we see that shifting to the right is equivalent to division by powers of 2.

Lost bits are gone

However, a shift cannot reclaim "lost" bits. For example, if we shift this pattern:

00111000 00000000 00000000 00000110

to the left 4 positions (939,524,102 << 4), we get 2,147,483,744:

10000000 00000000 00000000 01100000

and then shifting back ((939,524,102 << 4) >>> 4) we get 134,217,734:

00001000 00000000 00000000 00000110

We cannot get back our original value once we have lost bits.


Arithmetic right shift (>>)

The arithmetic right shift is exactly like the logical right shift, except instead of padding with zero, it pads with the most significant bit. This is because the most significant bit is the sign bit, or the bit that distinguishes positive and negative numbers. By padding with the most significant bit, the arithmetic right shift is sign-preserving.

For example, if we interpret this bit pattern as a negative number:

10000000 00000000 00000000 01100000

we have the number -2,147,483,552. Shifting this to the right 4 positions with the arithmetic shift (-2,147,483,552 >> 4) would give us:

11111000 00000000 00000000 00000110

or the number -134,217,722.

So we see that we have preserved the sign of our negative numbers by using the arithmetic right shift, rather than the logical right shift. And once again, we see that we are performing division by powers of 2.


Bitwise operations, including bit shift, are fundamental to low-level hardware or embedded programming. If you read a specification for a device or even some binary file formats, you will see bytes, words, and dwords, broken up into non-byte aligned bitfields, which contain various values of interest. Accessing these bit-fields for reading/writing is the most common usage.

A simple real example in graphics programming is that a 16-bit pixel is represented as follows:

  bit | 15| 14| 13| 12| 11| 10| 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1  | 0 |
      |       Blue        |         Green         |       Red          |

To get at the green value you would do this:

 #define GREEN_MASK  0x7E0
 #define GREEN_OFFSET  5

 // Read green
 uint16_t green = (pixel & GREEN_MASK) >> GREEN_OFFSET;

Explanation

In order to obtain the value of green ONLY, which starts at offset 5 and ends at 10 (i.e. 6-bits long), you need to use a (bit) mask, which when applied against the entire 16-bit pixel, will yield only the bits we are interested in.

#define GREEN_MASK  0x7E0

The appropriate mask is 0x7E0 which in binary is 0000011111100000 (which is 2016 in decimal).

uint16_t green = (pixel & GREEN_MASK) ...;

To apply a mask, you use the AND operator (&).

uint16_t green = (pixel & GREEN_MASK) >> GREEN_OFFSET;

After applying the mask, you'll end up with a 16-bit number which is really just a 11-bit number since its MSB is in the 11th bit. Green is actually only 6-bits long, so we need to scale it down using a right shift (11 - 6 = 5), hence the use of 5 as offset (#define GREEN_OFFSET 5).

Also common is using bit shifts for fast multiplication and division by powers of 2:

 i <<= x;  // i *= 2^x;
 i >>= y;  // i /= 2^y;

Let's say we have a single byte:

0110110

Applying a single left bitshift gets us:

1101100

The leftmost zero was shifted out of the byte, and a new zero was appended to the right end of the byte.

The bits don't rollover; they are discarded. That means if you left shift 1101100 and then right shift it, you won't get the same result back.

Shifting left by N is equivalent to multiplying by 2N.

Shifting right by N is (if you are using ones' complement) is the equivalent of dividing by 2N and rounding to zero.

Bitshifting can be used for insanely fast multiplication and division, provided you are working with a power of 2. Almost all low-level graphics routines use bitshifting.

For example, way back in the olden days, we used mode 13h (320x200 256 colors) for games. In Mode 13h, the video memory was laid out sequentially per pixel. That meant to calculate the location for a pixel, you would use the following math:

memoryOffset = (row * 320) + column

Now, back in that day and age, speed was critical, so we would use bitshifts to do this operation.

However, 320 is not a power of two, so to get around this we have to find out what is a power of two that added together makes 320:

(row * 320) = (row * 256) + (row * 64)

Now we can convert that into left shifts:

(row * 320) = (row << 8) + (row << 6)

For a final result of:

memoryOffset = ((row << 8) + (row << 6)) + column

Now we get the same offset as before, except instead of an expensive multiplication operation, we use the two bitshifts...in x86 it would be something like this (note, it's been forever since I've done assembly (editor's note: corrected a couple mistakes and added a 32-bit example)):

mov ax, 320; 2 cycles
mul word [row]; 22 CPU Cycles
mov di,ax; 2 cycles
add di, [column]; 2 cycles
; di = [row]*320 + [column]

; 16-bit addressing mode limitations:
; [di] is a valid addressing mode, but [ax] isn't, otherwise we could skip the last mov

Total: 28 cycles on whatever ancient CPU had these timings.

Vrs

mov ax, [row]; 2 cycles
mov di, ax; 2
shl ax, 6;  2
shl di, 8;  2
add di, ax; 2    (320 = 256+64)
add di, [column]; 2
; di = [row]*(256+64) + [column]

12 cycles on the same ancient CPU.

Yes, we would work this hard to shave off 16 CPU cycles.

In 32 or 64-bit mode, both versions get a lot shorter and faster. Modern out-of-order execution CPUs like Intel Skylake (see http://agner.org/optimize/) have very fast hardware multiply (low latency and high throughput), so the gain is much smaller. AMD Bulldozer-family is a bit slower, especially for 64-bit multiply. On Intel CPUs, and AMD Ryzen, two shifts are slightly lower latency but more instructions than a multiply (which may lead to lower throughput):

imul edi, [row], 320    ; 3 cycle latency from [row] being ready
add  edi, [column]      ; 1 cycle latency (from [column] and edi being ready).
; edi = [row]*(256+64) + [column],  in 4 cycles from [row] being ready.

vs.

mov edi, [row]
shl edi, 6               ; row*64.   1 cycle latency
lea edi, [edi + edi*4]   ; row*(64 + 64*4).  1 cycle latency
add edi, [column]        ; 1 cycle latency from edi and [column] both being ready
; edi = [row]*(256+64) + [column],  in 3 cycles from [row] being ready.

Compilers will do this for you: See how GCC, Clang, and Microsoft Visual C++ all use shift+lea when optimizing return 320*row + col;.

The most interesting thing to note here is that x86 has a shift-and-add instruction (LEA) that can do small left shifts and add at the same time, with the performance as an add instruction. ARM is even more powerful: one operand of any instruction can be left or right shifted for free. So scaling by a compile-time-constant that's known to be a power-of-2 can be even more efficient than a multiply.


OK, back in the modern days... something more useful now would be to use bitshifting to store two 8-bit values in a 16-bit integer. For example, in C#:

// Byte1: 11110000
// Byte2: 00001111

Int16 value = ((byte)(Byte1 >> 8) | Byte2));

// value = 000011111110000;

In C++, compilers should do this for you if you used a struct with two 8-bit members, but in practice they don't always.