What is the -fPIE option for position-independent executables in gcc and ld?
Minimal runnable example: GDB the executable twice
For those that want to see some action, let's see ASLR work on the PIE executable and change addresses across runs:
main.c
#include <stdio.h>
int main(void) {
puts("hello");
}
main.sh
#!/usr/bin/env bash
echo 2 | sudo tee /proc/sys/kernel/randomize_va_space
for pie in no-pie pie; do
exe="${pie}.out"
gcc -O0 -std=c99 "-${pie}" "-f${pie}" -ggdb3 -o "$exe" main.c
gdb -batch -nh \
-ex 'set disable-randomization off' \
-ex 'break main' \
-ex 'run' \
-ex 'printf "pc = 0x%llx\n", (long long unsigned)$pc' \
-ex 'run' \
-ex 'printf "pc = 0x%llx\n", (long long unsigned)$pc' \
"./$exe" \
;
echo
echo
done
For the one with -no-pie, everything is boring:
Breakpoint 1 at 0x401126: file main.c, line 4.
Breakpoint 1, main () at main.c:4
4 puts("hello");
pc = 0x401126
Breakpoint 1, main () at main.c:4
4 puts("hello");
pc = 0x401126
Before starting execution, break main sets a breakpoint at 0x401126.
Then, during both executions, run stops at address 0x401126.
The one with -pie however is much more interesting:
Breakpoint 1 at 0x1139: file main.c, line 4.
Breakpoint 1, main () at main.c:4
4 puts("hello");
pc = 0x5630df2d6139
Breakpoint 1, main () at main.c:4
4 puts("hello");
pc = 0x55763ab2e139
Before starting execution, GDB just takes a "dummy" address that is present in the executable: 0x1139.
After it starts however, GDB intelligently notices that the dynamic loader placed the program in a different location, and the first break stopped at 0x5630df2d6139.
Then, the second run also intelligently noticed that the executable moved again, and ended up breaking at 0x55763ab2e139.
echo 2 | sudo tee /proc/sys/kernel/randomize_va_space ensures that ASLR is on (the default in Ubuntu 17.10): How can I temporarily disable ASLR (Address space layout randomization)? | Ask Ubuntu.
set disable-randomization off is needed otherwise GDB, as the name suggests, turns off ASLR for the process by default to give fixed addresses across runs to improve the debugging experience: Difference between gdb addresses and "real" addresses? | Stack Overflow.
readelf analysis
Furthermore, we can also observe that:
readelf -s ./no-pie.out | grep main
gives the actual runtime load address (pc pointed to the following instruction 4 bytes after):
64: 0000000000401122 21 FUNC GLOBAL DEFAULT 13 main
while:
readelf -s ./pie.out | grep main
gives just an offset:
65: 0000000000001135 23 FUNC GLOBAL DEFAULT 14 main
By turning ASLR off (with either randomize_va_space or set disable-randomization off), GDB always gives main the address: 0x5555555547a9, so we deduce that the -pie address is composed from:
0x555555554000 + random offset + symbol offset (79a)
TODO where is 0x555555554000 hard coded in the Linux kernel / glibc loader / wherever? How is the address of the text section of a PIE executable determined in Linux?
Minimal assembly example
Another cool thing we can do is to play around with some assembly code to understand more concretely what PIE means.
We can do that with a Linux x86_64 freestanding assembly hello world:
main.S
.text
.global _start
_start:
asm_main_after_prologue:
/* write */
mov $1, %rax /* syscall number */
mov $1, %rdi /* stdout */
mov $msg, %rsi /* buffer */
mov $len, %rdx /* len */
syscall
/* exit */
mov $60, %rax /* syscall number */
mov $0, %rdi /* exit status */
syscall
msg:
.ascii "hello\n"
len = . - msg
GitHub upstream
and it assembles and runs fine with:
as -o main.o main.S
ld -o main.out main.o
./main.out
However, if we try to link it as PIE with (--no-dynamic-linker is required as explained at: How to create a statically linked position independent executable ELF in Linux?):
ld --no-dynamic-linker -pie -o main.out main.o
then link will fail with:
ld: main.o: relocation R_X86_64_32S against `.text' can not be used when making a PIE object; recompile with -fPIC
ld: final link failed: nonrepresentable section on output
Because the line:
mov $msg, %rsi /* buffer */
hardcodes the message address in the mov operand, and is therefore not position independent.
If we instead write it in a position independent way:
lea msg(%rip), %rsi
then PIE link works fine, and GDB shows us that the executable does get loaded at a different location in memory every time.
The difference here is that lea encoded the address of msg relative to the current PC address due to the rip syntax, see also: How to use RIP Relative Addressing in a 64-bit assembly program?
We can also figure that out by disassembling both versions with:
objdump -S main.o
which give respectively:
e: 48 c7 c6 00 00 00 00 mov $0x0,%rsi
e: 48 8d 35 19 00 00 00 lea 0x19(%rip),%rsi # 2e <msg>
000000000000002e <msg>:
2e: 68 65 6c 6c 6f pushq $0x6f6c6c65
So we see clearly that lea already has the full correct address of msg encoded as current address + 0x19.
The mov version however has set the address to 00 00 00 00, which means that a relocation will be performed there: What do linkers do? The cryptic R_X86_64_32S in the ld error message is the actual type of relocation that was required and which cannot happen in PIE executables.
Another fun thing that we can do is to put the msg in the data section instead of .text with:
.data
msg:
.ascii "hello\n"
len = . - msg
Now the .o assembles to:
e: 48 8d 35 00 00 00 00 lea 0x0(%rip),%rsi # 15 <_start+0x15>
so the RIP offset is now 0, and we guess that a relocation has been requested by the assembler. We confirm that with:
readelf -r main.o
which gives:
Relocation section '.rela.text' at offset 0x160 contains 1 entry:
Offset Info Type Sym. Value Sym. Name + Addend
000000000011 000200000002 R_X86_64_PC32 0000000000000000 .data - 4
so clearly R_X86_64_PC32 is a PC relative relocation that ld can handle for PIE executables.
This experiment taught us that the linker itself checks the program can be PIE and marks it as such.
Then when compiling with GCC, -pie tells GCC to generate position independent assembly.
But if we write assembly ourselves, we must manually ensure that we have achieved position independence.
In ARMv8 aarch64, the position independent hello world can be achieved with the ADR instruction.
How to determine if an ELF is position independent?
Besides just running it through GDB, some static methods are mentioned at:
- executable: https://unix.stackexchange.com/questions/89211/how-to-test-whether-a-linux-binary-was-compiled-as-position-independent-code/435038#435038
- library: How can I tell, with something like objdump, if an object file has been built with -fPIC?
Tested in Ubuntu 18.10.
PIE is to support address space layout randomization (ASLR) in executable files.
Before the PIE mode was created, the program's executable could not be placed at a random address in memory, only position independent code (PIC) dynamic libraries could be relocated to a random offset. It works very much like what PIC does for dynamic libraries, the difference is that a Procedure Linkage Table (PLT) is not created, instead PC-relative relocation is used.
After enabling PIE support in gcc/linkers, the body of program is compiled and linked as position-independent code. A dynamic linker does full relocation processing on the program module, just like dynamic libraries. Any usage of global data is converted to access via the Global Offsets Table (GOT) and GOT relocations are added.
PIE is well described in this OpenBSD PIE presentation.
Changes to functions are shown in this slide (PIE vs PIC).
x86 pic vs pie
Local global variables and functions are optimized in pie
External global variables and functions are same as pic
and in this slide (PIE vs old-style linking)
x86 pie vs no-flags (fixed)
Local global variables and functions are similar to fixed
External global variables and functions are same as pic
Note, that PIE may be incompatible with -static