What is the minimum latency of USB 3.0

Answering my own question...

I've come to realise that this question kind-of misses the point of USB 3.0. Unlike 2.0, it is not a shared-bus system. Instead it uses a point-to-point link between the host and each device (I'm oversimplifying but the gist is true). With USB 2.0, the 125 us polling interval was critical to how the bus was time-division multiplexed between devices. However, because 3.0 uses point-to-point links, there is no multiplexing to be done and thus the polling interval no longer exists. As a result, the latency on packet delivery is much less than with USB 2.0.

In my experiments with a Cypress FX-3 devkit, I have found that it is easy enough to get an average round trip from Windows application to the device and back with an average latency of 30 us. I suspect that the vast majority of that time is spent in various OS delays, eg the user-space to kernel-space mode switch and the DPC latency within the driver.

I've got a couple of resources for you, one I've just downloaded which is the complete specs ... several pdfs zipped up for USB3, and here is short excerpt from page 58,59 (USB 3_r1.0_06_06_2011.pdf):

USB 2.0 transmits SOF/uSOF at fixed 1 ms/125 μs intervals. A device driver may change the interval with small finite adjustments depending on the implementation of host and system software. USB 3.0 adds mechanism for devices to send a Bus Interval Adjustment Message that is used by the host to adjust its 125 μs bus interval up to +/-13.333 μs.

In addition, the host may send an Isochronous Timestamp Packet (ITP) within a relaxed timing window from a bus interval boundary.

Here is one more resource which looked interesting which deals with calculating latency.

You make a good point about operating system latency issues, especially in not real time operating systems.

I might suggest that you check on SuperUser too, maybe someone has other ideas. CHEERS