What is the purpose of willSet and didSet in Swift?

My understanding is that set and get are for computed properties (no backing from stored properties)

_{if you are coming from an Objective-C bare in mind that the naming conventions have changed. In Swift an iVar or instance variable is named stored property}

Example 1 (read only property) - with warning:

var test : Int {
    get {
        return test
    }
}

This will result in a warning because this results in a recursive function call (the getter calls itself).The warning in this case is "Attempting to modify 'test' within its own getter".

Example 2. Conditional read/write - with warning

var test : Int {
    get {
        return test
    }
    set (aNewValue) {
        //I've contrived some condition on which this property can be set
        //(prevents same value being set)
        if (aNewValue != test) {
            test = aNewValue
        }
    }
}

Similar problem - you cannot do this as it's recursively calling the setter. Also, note this code will not complain about no initialisers as there is no stored property to initialise.

Example 3. read/write computed property - with backing store

Here is a pattern that allows conditional setting of an actual stored property

//True model data
var _test : Int = 0

var test : Int {
    get {
        return _test
    }
    set (aNewValue) {
        //I've contrived some condition on which this property can be set
        if (aNewValue != test) {
            _test = aNewValue
        }
    }
}

Note The actual data is called _test (although it could be any data or combination of data) Note also the need to provide an initial value (alternatively you need to use an init method) because _test is actually an instance variable

Example 4. Using will and did set

//True model data
var _test : Int = 0 {

    //First this
    willSet {
        println("Old value is \(_test), new value is \(newValue)")
    }

    //value is set

    //Finaly this
    didSet {
        println("Old value is \(oldValue), new value is \(_test)")
    }
}

var test : Int {
    get {
        return _test
    }
    set (aNewValue) {
        //I've contrived some condition on which this property can be set
        if (aNewValue != test) {
            _test = aNewValue
        }
    }
}

Here we see willSet and didSet intercepting a change in an actual stored property. This is useful for sending notifications, synchronisation etc... (see example below)

Example 5. Concrete Example - ViewController Container

//Underlying instance variable (would ideally be private)
var _childVC : UIViewController? {
    willSet {
        //REMOVE OLD VC
        println("Property will set")
        if (_childVC != nil) {
            _childVC!.willMoveToParentViewController(nil)
            self.setOverrideTraitCollection(nil, forChildViewController: _childVC)
            _childVC!.view.removeFromSuperview()
            _childVC!.removeFromParentViewController()
        }
        if (newValue) {
            self.addChildViewController(newValue)
        }

    }

    //I can't see a way to 'stop' the value being set to the same controller - hence the computed property

    didSet {
        //ADD NEW VC
        println("Property did set")
        if (_childVC) {
//                var views  = NSDictionaryOfVariableBindings(self.view)    .. NOT YET SUPPORTED (NSDictionary bridging not yet available)

            //Add subviews + constraints
            _childVC!.view.setTranslatesAutoresizingMaskIntoConstraints(false)       //For now - until I add my own constraints
            self.view.addSubview(_childVC!.view)
            let views = ["view" : _childVC!.view] as NSMutableDictionary
            let layoutOpts = NSLayoutFormatOptions(0)
            let lc1 : AnyObject[] = NSLayoutConstraint.constraintsWithVisualFormat("|[view]|",  options: layoutOpts, metrics: NSDictionary(), views: views)
            let lc2 : AnyObject[] = NSLayoutConstraint.constraintsWithVisualFormat("V:|[view]|", options: layoutOpts, metrics: NSDictionary(), views: views)
            self.view.addConstraints(lc1)
            self.view.addConstraints(lc2)

            //Forward messages to child
            _childVC!.didMoveToParentViewController(self)
        }
    }
}


//Computed property - this is the property that must be used to prevent setting the same value twice
//unless there is another way of doing this?
var childVC : UIViewController? {
    get {
        return _childVC
    }
    set(suggestedVC) {
        if (suggestedVC != _childVC) {
            _childVC = suggestedVC
        }
    }
}

Note the use of BOTH computed and stored properties. I've used a computed property to prevent setting the same value twice (to avoid bad things happening!); I've used willSet and didSet to forward notifications to viewControllers (see UIViewController documentation and info on viewController containers)

I hope this helps, and please someone shout if I've made a mistake anywhere here!

The point seems to be that sometimes, you need a property that has automatic storage and some behavior, for instance to notify other objects that the property just changed. When all you have is get/set, you need another field to hold the value. With willSet and didSet, you can take action when the value is modified without needing another field. For instance, in that example:

class Foo {
    var myProperty: Int = 0 {
        didSet {
            print("The value of myProperty changed from \(oldValue) to \(myProperty)")
        }
    }
}

myProperty prints its old and new value every time it is modified. With just getters and setters, I would need this instead:

class Foo {
    var myPropertyValue: Int = 0
    var myProperty: Int {
        get { return myPropertyValue }
        set {
            print("The value of myProperty changed from \(myPropertyValue) to \(newValue)")
            myPropertyValue = newValue
        }
    }
}

So willSet and didSet represent an economy of a couple of lines, and less noise in the field list.