What is the Rowhammer DRAM bug and how should I treat it?
Solution 1:
The CMU-Intel paper you cited shows (on page 5) that the error rate depends heavily on the part number / manufacturing date of the DRAM module and varies by a factor of 10-1000. There are also some indications that the problem is much less pronounced in recently (2014) manufactured chips.
The number '9.4x10^-14' that you cited was used in the context of a proposed theoretical mitigation mechanism called "PARA" (that might be similar to an existing mitigation mechanism pTRR (pseudo Target Row Refresh)) and is irrelevant to your question, because PARA has nothing to do with ECC.
A second CMU-Intel paper (page 10) mentions the effects of different ECC algorithms on error reduction (factor 10^2 to 10^5, possibly much more with sophisticated memory tests and "guardbanding").
ECC effectively turns the Row Hammer exploit into a DOS attack. 1bit errors will be corrected by ECC, and as soon as a non-correctable 2bit error is detected the system will halt (assuming SECDED ECC).
A solution is to buy hardware that supports pTRR or TRR. See current blog post from Cisco about Row Hammer. At least some manufacturers seem to have one of these mitigation mechanisms built into their DRAM modules, but keep it deeply hidden in their specs. To answer your question: ask the vendor.
Faster refresh rates (32ms instead of 64ms) and aggressive Patrol Scrub intervals help, too, but would have a performance impact. But I don't know any server hardware that actually allows finetuning these parameters.
I guess there's not much you can do on the operating system side except terminating suspicous processes with constant high cpu usage and high cache misses.
Solution 2:
The situation still seems quite unclear so I don't think your questions can be answered directly, but here is some relatively recent information as a partial answer. For news, follow the rowhammer-discuss mailing list.
I'm not sure it is possible at present with public information to avoid buying vulnerable RAM, nor to easily predict failure rates in existing hardware. Manufacturers have not been open with information about how their products are affected. It is possible to test memory already purchased using software tools, but you should be aware that running those tools for significant periods (hours) can permanently degrade RAM and cause faults in running software.
"Unnamed memory companies" have reportedly attempted to pay a bribe in return for Passmark Software not releasing a rowhammer test in their Memtest86 tool.
Intel Skylake hardware has been reported to be more vulnerable, not less, to rowhammer because of the addition of the addition of a new clflushopt instruction. This has already been exploited in rowhammer.js
Daniel Gruss answers some questions here about mitigation as of December 2015 (coauthor of the rowhammer.js paper) in this talk:
- While some ECC RAM is less vulnerable than non-ECC RAM to rowhammer, other ECC RAM is more vulnerable than non-ECC RAM (link to question in video)
- Switching to a faster refresh rate is sufficient to prevent rowhammer with most but not all hardware - but not all BIOSes allow changing the refresh rate (link to question in video).
As a countermeasure, it may be possible to detect rowhammer attacks in progress, but I don't know that that has been done.