What ports does RabbitMQ use?
What ports is RabbitMQ using?
Default: 5672, the manual has the answer. It's defined in the RABBITMQ_NODE_PORT variable.
https://www.rabbitmq.com/configure.html#define-environment-variables
The number might be differently if changed by someone in the rabbitmq configuration file:
vi /etc/rabbitmq/rabbitmq-env.conf
Ask the nmap if it can see it:
sudo nmap -p 1-65535 localhost
Starting Nmap 5.51 ( http://nmap.org ) at 2014-09-19 13:50 EDT
Nmap scan report for localhost (127.0.0.1)
Host is up (0.00041s latency).
PORT STATE SERVICE
443/tcp open https
5672/tcp open amqp
15672/tcp open unknown
35102/tcp open unknown
59440/tcp open unknown
Oh look, 5672, and 15672
Ask netstat if it can see it:
netstat -lntu
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:15672 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:55672 0.0.0.0:* LISTEN
tcp 0 0 :::5672 :::* LISTEN
Oh look 5672.
lsof to see ports:
eric@dev ~$ sudo lsof -i | grep beam
beam.smp 21216 rabbitmq 17u IPv4 33148214 0t0 TCP *:55672 (LISTEN)
beam.smp 21216 rabbitmq 18u IPv4 33148219 0t0 TCP *:15672 (LISTEN)
use nmap from a different machine, find out if 5672 is open:
sudo nmap -p 5672 10.0.1.71
Starting Nmap 5.51 ( http://nmap.org ) at 2014-09-19 13:19 EDT
Nmap scan report for 10.0.1.71
Host is up (0.00011s latency).
PORT STATE SERVICE
5672/tcp open amqp
MAC Address: 0A:40:0E:8C:75:6C (Unknown)
Nmap done: 1 IP address (1 host up) scanned in 0.13 seconds
Try to connect to a port manually with telnet, 5671 is CLOSED:
telnet localhost 5671
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
Try to connect to a port manually with telnet, 5672 is OPEN:
telnet localhost 5672
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Check your firewall:
sudo cat /etc/sysconfig/iptables
It should tell you what ports are made open:
-A INPUT -p tcp -m tcp --dport 5672 -j ACCEPT
Reapply your firewall:
sudo service iptables restart
iptables: Setting chains to policy ACCEPT: filter [ OK ]
iptables: Flushing firewall rules: [ OK ]
iptables: Unloading modules: [ OK ]
iptables: Applying firewall rules: [ OK ]
PORT 4369: Erlang makes use of a Port Mapper Daemon (epmd) for resolution of node names in a cluster. Nodes must be able to reach each other and the port mapper daemon for clustering to work.
PORT 35197 set by inet_dist_listen_min/max Firewalls must permit traffic in this range to pass between clustered nodes
RabbitMQ Management console:
- PORT 15672 for RabbitMQ version 3.x
- PORT 55672 for RabbitMQ pre 3.x
PORT 5672 RabbitMQ main port.
For a cluster of nodes, they must be open to each other on 35197, 4369 and 5672.
For any servers that want to use the message queue, only 5672 is required.