What tools, parts, and supplies should be kept in a data center?
Solution 1:
In addition to other items listed:
- a quality set of miniature screwdrivers
- Velcro - the strips for cables, but also an assortment of squares, etc.
- zip ties and the knowledge of when not to use them
- small divided screw organizer that's kept empty except during disassembly of something
- paper towels and glass cleaner (multi-purpose cleaner)
- a small vacuum and/or dustmop
- a socket wrench and socket set
- a set of needle-nose pliers (two or three sizes)
- diagonal cutters
- an outlet tester
- flashlight
- spare batteries in each size for everything that uses them
- notepad/clipboard and pens/pencils
- dry-erase markers can be used for temporary labeling
- canned air
- tape measure
- ruler/straightedge
I can list more, but I'll stop there.
Edit:
Additional items:
- Leatherman tool
- magnetic pickup tool on an extensible wand
- parts pickup tool (the flexible, spring-loaded grippy fingers variety
- inspection mirrors (one with an extensible wand, one without)
- a spray can of contact cleaner
- a bottle of 90% isopropanol and some lint-free swabs
- latex or latex-free rubber gloves
- a small trash can and bags for it
- a small duster like the basic Swiffer
Solution 2:
You should have also something to remove floor tiles, to access the cables underneath.
Very useful if you have to do frequent cabling work.
Solution 3:
- Headlamp. Better then a flashlight for getting into those dark areas between all the cables or that dark area under the rack. Your hands are free.
- Rechargeable batteries and a battery quick charger. You might need batteries at 2AM when all the stores are closed.
- Good cut-resistant gloves like these Kevlar-coated nitrile gloves. These are really worth it. They keep your hands clean when working with cabling, rails, that thin oily schmutz which coats most server chassis', etc. They are very cut-resistant and protect your beautiful hands from cuts and pinches while handling those bulky boxes made with sheet metal. They also have very good grip when lifting those 1U and 2U boxes into place, and are much thinner and allow more dexterity then ordinary garden gloves. They work pretty good in the garden or for regular home repair also. I have found these for $4.00 at my local hardware store.
Solution 4:
I would stock up on screwdrivers, as those disappear, and I wouldn’t be afraid of picking up a couple of cordless ones, as those can make a long day much shorter if you’re running a lot of screws in (just start them by hand if possible so you don’t crossthread anything). A drill is handy, but a cordless screwdriver is much lighter, easier to wield for an entire day, and easier to maneuver around racks.
You have a lot of things i would suggest on your list already, a good set of wire strippers and good crimping tools. More:
- A good punchdown tool
- A rubber mallet and/or non-marring hammer
- At least two pair of vice grips
- One mid-sized adjustable wrench
- Maybe a pair of 8-10” Channellocks
You can get everything I said there for <$30 at most hardware stores, and if/when you ever need them you won’t be kicking yourself for not having them (ever have a rack/rail bent for whatever reason and no way to get it back? Vicegrips/channellocks Ever tried to tighten a loose castor on <thing x> and no way to do it? Adjustable wrench. Ever had something that just barely didn’t fit? Mallets can help :))
The biggest thing I see people skimp on is storage. You stock up with all this great stuff, now where are you going to put it? I suggest more than a cabinet with tupperware containers; a decent set of mid-sized toolboxes (17”-26”) can help you bring the tools to where you need them. A decent rolling workstation can provide a surface to work off of, storage for tools, and the convenience of portability, and in most cases, the security of a metal cabinet that can be locked.