When should I (not) want to use pandas apply() in my code?
apply
, the Convenience Function you Never Needed
We start by addressing the questions in the OP, one by one.
"If
apply
is so bad, then why is it in the API?"
DataFrame.apply
and Series.apply
are convenience functions defined on DataFrame and Series object respectively. apply
accepts any user defined function that applies a transformation/aggregation on a DataFrame. apply
is effectively a silver bullet that does whatever any existing pandas function cannot do.
Some of the things apply
can do:
- Run any user-defined function on a DataFrame or Series
- Apply a function either row-wise (
axis=1
) or column-wise (axis=0
) on a DataFrame - Perform index alignment while applying the function
- Perform aggregation with user-defined functions (however, we usually prefer
agg
ortransform
in these cases) - Perform element-wise transformations
- Broadcast aggregated results to original rows (see the
result_type
argument). - Accept positional/keyword arguments to pass to the user-defined functions.
...Among others. For more information, see Row or Column-wise Function Application in the documentation.
So, with all these features, why is apply
bad? It is because apply
is slow. Pandas makes no assumptions about the nature of your function, and so iteratively applies your function to each row/column as necessary. Additionally, handling all of the situations above means apply
incurs some major overhead at each iteration. Further, apply
consumes a lot more memory, which is a challenge for memory bounded applications.
There are very few situations where apply
is appropriate to use (more on that below). If you're not sure whether you should be using apply
, you probably shouldn't.
Let's address the next question.
"How and when should I make my code
apply
-free?"
To rephrase, here are some common situations where you will want to get rid of any calls to apply
.
Numeric Data
If you're working with numeric data, there is likely already a vectorized cython function that does exactly what you're trying to do (if not, please either ask a question on Stack Overflow or open a feature request on GitHub).
Contrast the performance of apply
for a simple addition operation.
df = pd.DataFrame({"A": [9, 4, 2, 1], "B": [12, 7, 5, 4]})
df
A B
0 9 12
1 4 7
2 2 5
3 1 4
<!- ->
df.apply(np.sum)
A 16
B 28
dtype: int64
df.sum()
A 16
B 28
dtype: int64
Performance wise, there's no comparison, the cythonized equivalent is much faster. There's no need for a graph, because the difference is obvious even for toy data.
%timeit df.apply(np.sum)
%timeit df.sum()
2.22 ms ± 41.2 µs per loop (mean ± std. dev. of 7 runs, 100 loops each)
471 µs ± 8.16 µs per loop (mean ± std. dev. of 7 runs, 1000 loops each)
Even if you enable passing raw arrays with the raw
argument, it's still twice as slow.
%timeit df.apply(np.sum, raw=True)
840 µs ± 691 µs per loop (mean ± std. dev. of 7 runs, 100 loops each)
Another example:
df.apply(lambda x: x.max() - x.min())
A 8
B 8
dtype: int64
df.max() - df.min()
A 8
B 8
dtype: int64
%timeit df.apply(lambda x: x.max() - x.min())
%timeit df.max() - df.min()
2.43 ms ± 450 µs per loop (mean ± std. dev. of 7 runs, 100 loops each)
1.23 ms ± 14.7 µs per loop (mean ± std. dev. of 7 runs, 1000 loops each)
In general, seek out vectorized alternatives if possible.
String/Regex
Pandas provides "vectorized" string functions in most situations, but there are rare cases where those functions do not... "apply", so to speak.
A common problem is to check whether a value in a column is present in another column of the same row.
df = pd.DataFrame({
'Name': ['mickey', 'donald', 'minnie'],
'Title': ['wonderland', "welcome to donald's castle", 'Minnie mouse clubhouse'],
'Value': [20, 10, 86]})
df
Name Value Title
0 mickey 20 wonderland
1 donald 10 welcome to donald's castle
2 minnie 86 Minnie mouse clubhouse
This should return the row second and third row, since "donald" and "minnie" are present in their respective "Title" columns.
Using apply, this would be done using
df.apply(lambda x: x['Name'].lower() in x['Title'].lower(), axis=1)
0 False
1 True
2 True
dtype: bool
df[df.apply(lambda x: x['Name'].lower() in x['Title'].lower(), axis=1)]
Name Title Value
1 donald welcome to donald's castle 10
2 minnie Minnie mouse clubhouse 86
However, a better solution exists using list comprehensions.
df[[y.lower() in x.lower() for x, y in zip(df['Title'], df['Name'])]]
Name Title Value
1 donald welcome to donald's castle 10
2 minnie Minnie mouse clubhouse 86
<!- ->
%timeit df[df.apply(lambda x: x['Name'].lower() in x['Title'].lower(), axis=1)]
%timeit df[[y.lower() in x.lower() for x, y in zip(df['Title'], df['Name'])]]
2.85 ms ± 38.4 µs per loop (mean ± std. dev. of 7 runs, 100 loops each)
788 µs ± 16.4 µs per loop (mean ± std. dev. of 7 runs, 1000 loops each)
The thing to note here is that iterative routines happen to be faster than apply
, because of the lower overhead. If you need to handle NaNs and invalid dtypes, you can build on this using a custom function you can then call with arguments inside the list comprehension.
For more information on when list comprehensions should be considered a good option, see my writeup: Are for-loops in pandas really bad? When should I care?.
Note
Date and datetime operations also have vectorized versions. So, for example, you should preferpd.to_datetime(df['date'])
, over, say,df['date'].apply(pd.to_datetime)
.Read more at the docs.
A Common Pitfall: Exploding Columns of Lists
s = pd.Series([[1, 2]] * 3)
s
0 [1, 2]
1 [1, 2]
2 [1, 2]
dtype: object
People are tempted to use apply(pd.Series)
. This is horrible in terms of performance.
s.apply(pd.Series)
0 1
0 1 2
1 1 2
2 1 2
A better option is to listify the column and pass it to pd.DataFrame.
pd.DataFrame(s.tolist())
0 1
0 1 2
1 1 2
2 1 2
<!- ->
%timeit s.apply(pd.Series)
%timeit pd.DataFrame(s.tolist())
2.65 ms ± 294 µs per loop (mean ± std. dev. of 7 runs, 100 loops each)
816 µs ± 40.5 µs per loop (mean ± std. dev. of 7 runs, 1000 loops each)
Lastly,
"Are there any situations where
apply
is good?"
Apply is a convenience function, so there are situations where the overhead is negligible enough to forgive. It really depends on how many times the function is called.
Functions that are Vectorized for Series, but not DataFrames
What if you want to apply a string operation on multiple columns? What if you want to convert multiple columns to datetime? These functions are vectorized for Series only, so they must be applied over each column that you want to convert/operate on.
df = pd.DataFrame(
pd.date_range('2018-12-31','2019-01-31', freq='2D').date.astype(str).reshape(-1, 2),
columns=['date1', 'date2'])
df
date1 date2
0 2018-12-31 2019-01-02
1 2019-01-04 2019-01-06
2 2019-01-08 2019-01-10
3 2019-01-12 2019-01-14
4 2019-01-16 2019-01-18
5 2019-01-20 2019-01-22
6 2019-01-24 2019-01-26
7 2019-01-28 2019-01-30
df.dtypes
date1 object
date2 object
dtype: object
This is an admissible case for apply
:
df.apply(pd.to_datetime, errors='coerce').dtypes
date1 datetime64[ns]
date2 datetime64[ns]
dtype: object
Note that it would also make sense to stack
, or just use an explicit loop. All these options are slightly faster than using apply
, but the difference is small enough to forgive.
%timeit df.apply(pd.to_datetime, errors='coerce')
%timeit pd.to_datetime(df.stack(), errors='coerce').unstack()
%timeit pd.concat([pd.to_datetime(df[c], errors='coerce') for c in df], axis=1)
%timeit for c in df.columns: df[c] = pd.to_datetime(df[c], errors='coerce')
5.49 ms ± 247 µs per loop (mean ± std. dev. of 7 runs, 100 loops each)
3.94 ms ± 48.1 µs per loop (mean ± std. dev. of 7 runs, 100 loops each)
3.16 ms ± 216 µs per loop (mean ± std. dev. of 7 runs, 100 loops each)
2.41 ms ± 1.71 ms per loop (mean ± std. dev. of 7 runs, 1 loop each)
You can make a similar case for other operations such as string operations, or conversion to category.
u = df.apply(lambda x: x.str.contains(...))
v = df.apply(lambda x: x.astype(category))
v/s
u = pd.concat([df[c].str.contains(...) for c in df], axis=1)
v = df.copy()
for c in df:
v[c] = df[c].astype(category)
And so on...
Converting Series to str
: astype
versus apply
This seems like an idiosyncrasy of the API. Using apply
to convert integers in a Series to string is comparable (and sometimes faster) than using astype
.
The graph was plotted using the perfplot
library.
import perfplot
perfplot.show(
setup=lambda n: pd.Series(np.random.randint(0, n, n)),
kernels=[
lambda s: s.astype(str),
lambda s: s.apply(str)
],
labels=['astype', 'apply'],
n_range=[2**k for k in range(1, 20)],
xlabel='N',
logx=True,
logy=True,
equality_check=lambda x, y: (x == y).all())
With floats, I see the astype
is consistently as fast as, or slightly faster than apply
. So this has to do with the fact that the data in the test is integer type.
GroupBy
operations with chained transformations
GroupBy.apply
has not been discussed until now, but GroupBy.apply
is also an iterative convenience function to handle anything that the existing GroupBy
functions do not.
One common requirement is to perform a GroupBy and then two prime operations such as a "lagged cumsum":
df = pd.DataFrame({"A": list('aabcccddee'), "B": [12, 7, 5, 4, 5, 4, 3, 2, 1, 10]})
df
A B
0 a 12
1 a 7
2 b 5
3 c 4
4 c 5
5 c 4
6 d 3
7 d 2
8 e 1
9 e 10
<!- ->
You'd need two successive groupby calls here:
df.groupby('A').B.cumsum().groupby(df.A).shift()
0 NaN
1 12.0
2 NaN
3 NaN
4 4.0
5 9.0
6 NaN
7 3.0
8 NaN
9 1.0
Name: B, dtype: float64
Using apply
, you can shorten this to a a single call.
df.groupby('A').B.apply(lambda x: x.cumsum().shift())
0 NaN
1 12.0
2 NaN
3 NaN
4 4.0
5 9.0
6 NaN
7 3.0
8 NaN
9 1.0
Name: B, dtype: float64
It is very hard to quantify the performance because it depends on the data. But in general, apply
is an acceptable solution if the goal is to reduce a groupby
call (because groupby
is also quite expensive).
Other Caveats
Aside from the caveats mentioned above, it is also worth mentioning that apply
operates on the first row (or column) twice. This is done to determine whether the function has any side effects. If not, apply
may be able to use a fast-path for evaluating the result, else it falls back to a slow implementation.
df = pd.DataFrame({
'A': [1, 2],
'B': ['x', 'y']
})
def func(x):
print(x['A'])
return x
df.apply(func, axis=1)
# 1
# 1
# 2
A B
0 1 x
1 2 y
This behaviour is also seen in GroupBy.apply
on pandas versions <0.25 (it was fixed for 0.25, see here for more information.)
Not all apply
s are alike
The below chart suggests when to consider apply
1. Green means possibly efficient; red avoid.
Some of this is intuitive: pd.Series.apply
is a Python-level row-wise loop, ditto pd.DataFrame.apply
row-wise (axis=1
). The misuses of these are many and wide-ranging. The other post deals with them in more depth. Popular solutions are to use vectorised methods, list comprehensions (assumes clean data), or efficient tools such as the pd.DataFrame
constructor (e.g. to avoid apply(pd.Series)
).
If you are using pd.DataFrame.apply
row-wise, specifying raw=True
(where possible) is often beneficial. At this stage, numba
is usually a better choice.
GroupBy.apply
: generally favoured
Repeating groupby
operations to avoid apply
will hurt performance. GroupBy.apply
is usually fine here, provided the methods you use in your custom function are themselves vectorised. Sometimes there is no native Pandas method for a groupwise aggregation you wish to apply. In this case, for a small number of groups apply
with a custom function may still offer reasonable performance.
pd.DataFrame.apply
column-wise: a mixed bag
pd.DataFrame.apply
column-wise (axis=0
) is an interesting case. For a small number of rows versus a large number of columns, it's almost always expensive. For a large number of rows relative to columns, the more common case, you may sometimes see significant performance improvements using apply
:
# Python 3.7, Pandas 0.23.4
np.random.seed(0)
df = pd.DataFrame(np.random.random((10**7, 3))) # Scenario_1, many rows
df = pd.DataFrame(np.random.random((10**4, 10**3))) # Scenario_2, many columns
# Scenario_1 | Scenario_2
%timeit df.sum() # 800 ms | 109 ms
%timeit df.apply(pd.Series.sum) # 568 ms | 325 ms
%timeit df.max() - df.min() # 1.63 s | 314 ms
%timeit df.apply(lambda x: x.max() - x.min()) # 838 ms | 473 ms
%timeit df.mean() # 108 ms | 94.4 ms
%timeit df.apply(pd.Series.mean) # 276 ms | 233 ms
1 There are exceptions, but these are usually marginal or uncommon. A couple of examples:
df['col'].apply(str)
may slightly outperformdf['col'].astype(str)
.df.apply(pd.to_datetime)
working on strings doesn't scale well with rows versus a regularfor
loop.
For axis=1
(i.e. row-wise functions) then you can just use the following function in lieu of apply
. I wonder why this isn't the pandas
behavior. (Untested with compound indexes, but it does appear to be much faster than apply
)
def faster_df_apply(df, func):
cols = list(df.columns)
data, index = [], []
for row in df.itertuples(index=True):
row_dict = {f:v for f,v in zip(cols, row[1:])}
data.append(func(row_dict))
index.append(row[0])
return pd.Series(data, index=index)