Why do MySQL queries pile up in "Sending data" state?
Solution 1:
Well, do note that if I recall well (it's been a while since I did DB work) COUNT(*) queries without a WHERE clause on innodb tables are notoriously slower than on MyISAM and Memory tables.
Also, is this by any chance a Xen DomU?
What is the frontend language? If PHP, is it using MySQL or MySQLi? Are they using persistent connections?
You have not mentionned the underlying operating system, but in the case of Linux I would start by staring at the output of free -m, paying special attention to the last two lines to see if memory is tight overall.
[0:504] callisto:cyanotype $ free -m
total used free shared buffers cached
Mem: 3961 3816 144 0 184 1454
-/+ buffers/cache: 2177 1784
Swap: 2898 0 2898
Here we have a system that's healthy (it is my workstation). The second column excludes buffers and cache, so I am in fact using 2177mb of memory, and have 1784 megabytes readily available.
Last line shows that I don't use swap at all so far.
Then giving vmstat(8), to see if your system is trashing like mad would be useful, too.
[0:505] callisto:cyanotype $ vmstat 5 10
procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu----
r b swpd free buff cache si so bi bo in cs us sy id wa
0 0 0 134116 189828 1499948 0 0 11 3 44 49 1 1 98 0
0 0 0 143112 189836 1489688 0 0 0 6 526 2177 1 1 98 0
0 0 0 139268 190504 1491864 0 0 512 4 663 4704 2 1 96 1
2 0 0 136688 191084 1493484 0 0 473 5 641 3039 1 1 97 1
0 0 0 52636 191712 1518620 0 0 5066 4 1321 6600 8 2 86 4
5 0 0 72992 193264 1377324 0 0 10742 31 1602 7441 12 3 80 5
2 1 0 84036 193896 1202012 0 0 10126 43 2621 4305 31 2 57 10
3 0 0 42456 195812 1060904 0 0 3970 75 55327 9806 43 5 41 10
8 1 0 34620 197040 942940 0 0 3554 64 50892 12531 43 6 44 6
^C
[0:506] callisto:cyanotype $
(My desktop really isn't doing all that much here, sorry. What a waste of 8 perfectly good cores)
If you see a lot of process spending time in the 'b' column, that means they are blocked, waiting for something. Often that is IO. The important columns here are si and so. Check if they're populated with high values. If so, this may be your problem -- something is consuming a lot of memory, more than you can actually affort. Using top(4) and ordering the columns by memory % (shift+m while in top) might show the culprit(s).
It's not impossible that your system is trashing to and from swap, and saturating the disks, causing blocked threads and processes.The tool iostat(8)(part of package sysstat, usually) should be given a whirl to see if you have processes that are blocked, stuck on IO_WAIT. A saturated disk can spell bad news for the whole system under high load, especially if the system is swapping a lot.
You might run iostat with extended stats, every five seconds, for instance:
[0:508] callisto:cyanotype $ iostat -x 5
Linux 2.6.35-23-generic (callisto) 2010-11-30 _x86_64_ (8 CPU)
avg-cpu: %user %nice %system %iowait %steal %idle
16,55 0,12 2,70 2,60 0,00 78,02
Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util
sdc 0,00 2,00 1,00 0,80 27,20 22,40 27,56 0,01 3,33 3,33 0,60
sdd 0,00 12,60 67,60 4,80 4222,40 139,20 60,24 0,62 8,62 3,29 23,80
sde 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00
sdf 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00
avg-cpu: %user %nice %system %iowait %steal %idle
32,02 0,10 1,83 0,44 0,00 65,61
Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util
sdc 0,60 3,20 11,00 0,80 265,60 32,00 25,22 0,05 3,90 2,88 3,40
sdd 0,00 8,20 0,00 3,00 0,00 89,60 29,87 0,02 8,00 7,33 2,20
sde 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00
sdf 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00
avg-cpu: %user %nice %system %iowait %steal %idle
49,26 0,22 3,12 0,12 0,00 47,28
Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util
sdc 6,20 3,00 7,40 3,80 208,00 54,40 23,43 0,09 7,86 2,50 2,80
sdd 0,00 15,20 0,20 4,00 1,60 152,00 36,57 0,03 6,67 6,19 2,60
sde 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00
sdf 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00
avg-cpu: %user %nice %system %iowait %steal %idle
16,00 0,54 1,05 1,07 0,00 81,35
Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util
sdc 4,20 0,00 31,40 0,00 3204,80 0,00 102,06 0,17 4,90 2,68 8,40
sdd 0,00 28,20 0,20 2,60 1,60 246,40 88,57 0,02 7,14 7,14 2,00
sde 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00
sdf 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00
^C
This should allow you to easily see if your volumes are being saturated. For instance here, you can see that my disks are terribly underutilized, that the system spends most of its cpu cycles idling, etc etc. If that percentage is mostly in the % IOWAIT column, well you have an IO bottleneck here. You probably already know all this, but just covering all the bases to make sure.
The idea is that your config file changed, and you have no history of it (putting your config files under version control is a great idea for that very reason) -- and it is not impossible the size of a buffer suddendly changed thus making expensive queries like COUNT(*) without SELECT suddendly start to gobble up ressources.
Based on what you have learned from the previous use of the tools abive -- you should probably inspect the configuration file (being the only thing that changed, it is very likely the culprit) to see if the buffer values are sane for your average load.
How large are the buffers, like the query_cache_size value, and especially the sort_buffer sizes? (If that doesn't fit in memory, it will performed on disk, at a massive cost as I'm sure you can imagine).
How large is the innodb_buffer_pool_size?
How large is the table_cacheand most importantly, does that value fits within the system limits for file handles? (both open-files-limit in [mysqld] and at the OS level).
Also, I don't remember off the top of my head if this is still true, but I'm fairly certain that innodb actually locks the entire table whenever it has to commit an auto-increment fields. I googled and I could not find if that was still true or not.
You could also use innotop(1) to see what's going on more in detail, too.
I hope this helps somehow or gives you a starting point :)
Solution 2:
This turned out to be a flaw in the combination of innodb_file_per_table, default-storage-engine = innodb, and a frequently-accessed page that created a temporary table. Each time a connection closed, it would drop the table, discarding pages from the buffer pool LRU. This would cause the server to stall for a bit, but never on the query that was actually causing the problem.
Worse, the innodb_file_per_table setting had been languishing in our my.cnf file for months before the server had to be restarted for an entirely unrelated reason, during which time we had been using those temporary tables without a problem. (The NOC suddenly took down the DNS server, causing every new connection to hang because we hadn't enabled skip-name-resolve, and wouldn't admit for hours that anything had changed.)
Fortunately, we were able to rewrite the offending page to use an even faster set of queries that loaded most of the work onto the front-end web servers, and haven't seen a problem since.