Write-back vs Write-Through caching?

The benefit of write-through to main memory is that it simplifies the design of the computer system. With write-through, the main memory always has an up-to-date copy of the line. So when a read is done, main memory can always reply with the requested data.

If write-back is used, sometimes the up-to-date data is in a processor cache, and sometimes it is in main memory. If the data is in a processor cache, then that processor must stop main memory from replying to the read request, because the main memory might have a stale copy of the data. This is more complicated than write-through.

Also, write-through can simplify the cache coherency protocol because it doesn't need the Modify state. The Modify state records that the cache must write back the cache line before it invalidates or evicts the line. In write-through a cache line can always be invalidated without writing back since memory already has an up-to-date copy of the line.

One more thing - on a write-back architecture software that writes to memory-mapped I/O registers must take extra steps to make sure that writes are immediately sent out of the cache. Otherwise writes are not visible outside the core until the line is read by another processor or the line is evicted.

Hope this article can help you Differences between disk Cache Write-through and Write-back

Write-through: Write is done synchronously both to the cache and to the backing store.

Write-back (or Write-behind): Writing is done only to the cache. A modified cache block is written back to the store, just before it is replaced.

Write-through: When data is updated, it is written to both the cache and the back-end storage. This mode is easy for operation but is slow in data writing because data has to be written to both the cache and the storage.

Write-back: When data is updated, it is written only to the cache. The modified data is written to the back-end storage only when data is removed from the cache. This mode has fast data write speed but data will be lost if a power failure occurs before the updated data is written to the storage.