Count number of 1 digits in 11 to the power of N
Powers of eleven can be stored as a string and calculated quite quickly that way, without a generalised arbitrary precision math package. All you need is multiply by ten and add.
For example, 111
is 11
. To get the next power of 11
(112
), you multiply by (10 + 1)
, which is effectively the number with a zero tacked the end, added to the number: 110 + 11 = 121
.
Similarly, 113
can then be calculated as: 1210 + 121 = 1331
.
And so on:
11^2 11^3 11^4 11^5 11^6
110 1210 13310 146410 1610510
+11 +121 +1331 +14641 +161051
--- ---- ----- ------ -------
121 1331 14641 161051 1771561
So that's how I'd approach, at least initially.
By way of example, here's a Python function to raise 11 to the n'th power, using the method described (I am aware that Python has support for arbitrary precision, keep in mind I'm just using it as a demonstration on how to do this an an algorithm, which is how the question was tagged):
def elevenToPowerOf(n):
# Anything to the zero is 1.
if n == 0: return "1"
# Otherwise, n <- n * 10 + n, once for each level of power.
num = "11"
while n > 1:
n = n - 1
# Make multiply by eleven easy.
ten = num + "0"
num = "0" + num
# Standard primary school algorithm for adding.
newnum = ""
carry = 0
for dgt in range(len(ten)-1,-1,-1):
res = int(ten[dgt]) + int(num[dgt]) + carry
carry = res // 10
res = res % 10
newnum = str(res) + newnum
if carry == 1:
newnum = "1" + newnum
# Prepare for next multiplication.
num = newnum
# There you go, 11^n as a string.
return num
And, for testing, a little program which works out those values for each power that you provide on the command line:
import sys
for idx in range(1,len(sys.argv)):
try:
power = int(sys.argv[idx])
except (e):
print("Invalid number [%s]" % (sys.argv[idx]))
sys.exit(1)
if power < 0:
print("Negative powers not allowed [%d]" % (power))
sys.exit(1)
number = elevenToPowerOf(power)
count = 0
for ch in number:
if ch == '1':
count += 1
print("11^%d is %s, has %d ones" % (power,number,count))
When you run that with:
time python3 prog.py 0 1 2 3 4 5 6 7 8 9 10 11 12 1000
you can see that it's both accurate (checked with bc
) and fast (finished in about half a second):
11^0 is 1, has 1 ones
11^1 is 11, has 2 ones
11^2 is 121, has 2 ones
11^3 is 1331, has 2 ones
11^4 is 14641, has 2 ones
11^5 is 161051, has 3 ones
11^6 is 1771561, has 3 ones
11^7 is 19487171, has 3 ones
11^8 is 214358881, has 2 ones
11^9 is 2357947691, has 1 ones
11^10 is 25937424601, has 1 ones
11^11 is 285311670611, has 4 ones
11^12 is 3138428376721, has 2 ones
11^1000 is 2469932918005826334124088385085221477709733385238396234869182951830739390375433175367866116456946191973803561189036523363533798726571008961243792655536655282201820357872673322901148243453211756020067624545609411212063417307681204817377763465511222635167942816318177424600927358163388910854695041070577642045540560963004207926938348086979035423732739933235077042750354729095729602516751896320598857608367865475244863114521391548985943858154775884418927768284663678512441565517194156946312753546771163991252528017732162399536497445066348868438762510366191040118080751580689254476068034620047646422315123643119627205531371694188794408120267120500325775293645416335230014278578281272863450085145349124727476223298887655183167465713337723258182649072572861625150703747030550736347589416285606367521524529665763903537989935510874657420361426804068643262800901916285076966174176854351055183740078763891951775452021781225066361670593917001215032839838911476044840388663443684517735022039957481918726697789827894303408292584258328090724141496484460001, has 105 ones
real 0m0.609s
user 0m0.592s
sys 0m0.012s
That may not necessarily be O(n2)
but it should be fast enough for your domain constraints.
Of course, given those constraints, you can make it O(1)
by using a method I call pre-generation. Simply write a program to generate an array you can plug into your program which contains a suitable function. The following Python program does exactly that, for the powers of eleven from 1 to 100 inclusive:
def mulBy11(num):
# Same length to ease addition.
ten = num + '0'
num = '0' + num
# Standard primary school algorithm for adding.
result = ''
carry = 0
for idx in range(len(ten)-1, -1, -1):
digit = int(ten[idx]) + int(num[idx]) + carry
carry = digit // 10
digit = digit % 10
result = str(digit) + result
if carry == 1:
result = '1' + result
return result
num = '1'
print('int oneCountInPowerOf11(int n) {')
print(' static int numOnes[] = {-1', end='')
for power in range(1,101):
num = mulBy11(num)
count = sum(1 for ch in num if ch == '1')
print(',%d' % count, end='')
print('};')
print(' if ((n < 0) || (n > sizeof(numOnes) / sizeof(*numOnes)))')
print(' return -1;')
print(' return numOnes[n];')
print('}')
The code output by this script is:
int oneCountInPowerOf11(int n) {
static int numOnes[] = {-1,2,2,2,2,3,3,3,2,1,1,4,2,3,1,4,2,1,4,4,1,5,5,1,5,3,6,6,3,6,3,7,5,7,4,4,2,3,4,4,3,8,4,8,5,5,7,7,7,6,6,9,9,7,12,10,8,6,11,7,6,5,5,7,10,2,8,4,6,8,5,9,13,14,8,10,8,7,11,10,9,8,7,13,8,9,6,8,5,8,7,15,12,9,10,10,12,13,7,11,12};
if ((n < 0) || (n > sizeof(numOnes) / sizeof(*numOnes)))
return -1;
return numOnes[n];
}
which should be blindingly fast when plugged into a C program. On my system, the Python code itself (when you up the range to 1..1000
) runs in about 0.6 seconds and the C code, when compiled, finds the number of ones in 111000 in 0.07 seconds.
Here's my concise solution.
def count1s(N):
# When 11^(N-1) = result, 11^(N) = (10+1) * result = 10*result + result
result = 1
for i in range(N):
result += 10*result
# Now count 1's
count = 0
for ch in str(result):
if ch == '1':
count += 1
return count