Create a virtual serial port connection over TCP

Try socat. Possible scenario:

socat  pty,link=/dev/virtualcom0,raw  tcp:192.168.254.254:8080&

socat creates TCP connection to 192.168.254.254:8080, so that everything, that will be written to /dev/virtualcom0 will be forwarded to 192.168.254.254:8080 and vice versa.

Another approach would be to use RFC2217 via ser2net on Linux sever side and RFC2217 driver on Windows side (for example http://www.hw-group.com/products/hw_vsp/index_en.html single port version). You can also try to get http://pyserial.sourceforge.net/ to work with ser2net.

The software will help to establish server and client connection over TCP http://www.serial-com-port.com/

I use it for creating virtual serial communications over network, but I have the real RS232 port on the computer. So I just transfer the data over network. If you need to create a virtual COM on the server too, use the Virtual Serial Port Driver.

you have socat and ser2net and other programs but my experience is very bad... not working properly. I've done this small python program, can be useful. Update port, baudrate... then use any tcp client. Remove first line if don't want to use is as auto executable script

#!/usr/bin/python

import socket
import sys
import serial

#open serial port
ser = serial.Serial('/dev/ttyAMA0', 115200, timeout=0)
#create socket
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
sock.setsockopt(socket.SOL_SOCKET, socket.SO_KEEPALIVE, 1)

#bond to the port. Don't use localhost to accept external connections
server_address = ('', 2105)
print('starting up on {} port {}'.format(*server_address))
sock.bind(server_address)

#listen
sock.listen(1)

#loop
while True:
    #waits for a new connection
    print('waiting for a connection')
    connection, client_address = sock.accept()
    try:
        print('connection from', client_address)
        #continously send from serial port to tcp and viceversa
        connection.settimeout(0.1)
        while True:
            try:
                data = connection.recv(16)
                if data == '': break
                ser.write(data)
            except KeyboardInterrupt:
                connection.close()
                sys.exit()
            except Exception as e:
                pass
            received_data = ser.read(ser.inWaiting())
            connection.sendall(received_data)
    except Exception as e:
        print e

    finally:
        #clean up connection
        connection.close()