Draw SceneKit object between two points
EDIT: For under or equal to IOS 11
I've good news for you ! You can link two points and put a SCNNode on this Vector !
Take this and enjoy drawing line between two point !
class CylinderLine: SCNNode
{
init( parent: SCNNode,//Needed to add destination point of your line
v1: SCNVector3,//source
v2: SCNVector3,//destination
radius: CGFloat,//somes option for the cylinder
radSegmentCount: Int, //other option
color: UIColor )// color of your node object
{
super.init()
//Calcul the height of our line
let height = v1.distance(v2)
//set position to v1 coordonate
position = v1
//Create the second node to draw direction vector
let nodeV2 = SCNNode()
//define his position
nodeV2.position = v2
//add it to parent
parent.addChildNode(nodeV2)
//Align Z axis
let zAlign = SCNNode()
zAlign.eulerAngles.x = Float(M_PI_2)
//create our cylinder
let cyl = SCNCylinder(radius: radius, height: CGFloat(height))
cyl.radialSegmentCount = radSegmentCount
cyl.firstMaterial?.diffuse.contents = color
//Create node with cylinder
let nodeCyl = SCNNode(geometry: cyl )
nodeCyl.position.y = -height/2
zAlign.addChildNode(nodeCyl)
//Add it to child
addChildNode(zAlign)
//set contrainte direction to our vector
constraints = [SCNLookAtConstraint(target: nodeV2)]
}
override init() {
super.init()
}
required init?(coder aDecoder: NSCoder) {
super.init(coder: aDecoder)
}
}
private extension SCNVector3{
func distance(receiver:SCNVector3) -> Float{
let xd = receiver.x - self.x
let yd = receiver.y - self.y
let zd = receiver.z - self.z
let distance = Float(sqrt(xd * xd + yd * yd + zd * zd))
if (distance < 0){
return (distance * -1)
} else {
return (distance)
}
}
}
Both solutions mentioned above work very well and I can contribute third solution to this question.
//extension code starts
func normalizeVector(_ iv: SCNVector3) -> SCNVector3 {
let length = sqrt(iv.x * iv.x + iv.y * iv.y + iv.z * iv.z)
if length == 0 {
return SCNVector3(0.0, 0.0, 0.0)
}
return SCNVector3( iv.x / length, iv.y / length, iv.z / length)
}
extension SCNNode {
func buildLineInTwoPointsWithRotation(from startPoint: SCNVector3,
to endPoint: SCNVector3,
radius: CGFloat,
color: UIColor) -> SCNNode {
let w = SCNVector3(x: endPoint.x-startPoint.x,
y: endPoint.y-startPoint.y,
z: endPoint.z-startPoint.z)
let l = CGFloat(sqrt(w.x * w.x + w.y * w.y + w.z * w.z))
if l == 0.0 {
// two points together.
let sphere = SCNSphere(radius: radius)
sphere.firstMaterial?.diffuse.contents = color
self.geometry = sphere
self.position = startPoint
return self
}
let cyl = SCNCylinder(radius: radius, height: l)
cyl.firstMaterial?.diffuse.contents = color
self.geometry = cyl
//original vector of cylinder above 0,0,0
let ov = SCNVector3(0, l/2.0,0)
//target vector, in new coordination
let nv = SCNVector3((endPoint.x - startPoint.x)/2.0, (endPoint.y - startPoint.y)/2.0,
(endPoint.z-startPoint.z)/2.0)
// axis between two vector
let av = SCNVector3( (ov.x + nv.x)/2.0, (ov.y+nv.y)/2.0, (ov.z+nv.z)/2.0)
//normalized axis vector
let av_normalized = normalizeVector(av)
let q0 = Float(0.0) //cos(angel/2), angle is always 180 or M_PI
let q1 = Float(av_normalized.x) // x' * sin(angle/2)
let q2 = Float(av_normalized.y) // y' * sin(angle/2)
let q3 = Float(av_normalized.z) // z' * sin(angle/2)
let r_m11 = q0 * q0 + q1 * q1 - q2 * q2 - q3 * q3
let r_m12 = 2 * q1 * q2 + 2 * q0 * q3
let r_m13 = 2 * q1 * q3 - 2 * q0 * q2
let r_m21 = 2 * q1 * q2 - 2 * q0 * q3
let r_m22 = q0 * q0 - q1 * q1 + q2 * q2 - q3 * q3
let r_m23 = 2 * q2 * q3 + 2 * q0 * q1
let r_m31 = 2 * q1 * q3 + 2 * q0 * q2
let r_m32 = 2 * q2 * q3 - 2 * q0 * q1
let r_m33 = q0 * q0 - q1 * q1 - q2 * q2 + q3 * q3
self.transform.m11 = r_m11
self.transform.m12 = r_m12
self.transform.m13 = r_m13
self.transform.m14 = 0.0
self.transform.m21 = r_m21
self.transform.m22 = r_m22
self.transform.m23 = r_m23
self.transform.m24 = 0.0
self.transform.m31 = r_m31
self.transform.m32 = r_m32
self.transform.m33 = r_m33
self.transform.m34 = 0.0
self.transform.m41 = (startPoint.x + endPoint.x) / 2.0
self.transform.m42 = (startPoint.y + endPoint.y) / 2.0
self.transform.m43 = (startPoint.z + endPoint.z) / 2.0
self.transform.m44 = 1.0
return self
}
}
//extension ended.
//in your code, you can like this.
let twoPointsNode1 = SCNNode()
scene.rootNode.addChildNode(twoPointsNode1.buildLineInTwoPointsWithRotation(
from: SCNVector3(1,-1,3), to: SCNVector3( 7,11,7), radius: 0.2, color: .cyan))
//end
you can reference http://danceswithcode.net/engineeringnotes/quaternions/quaternions.html
BTW, you will get same result when you use a cylinder to make a line between two points from above 3 methods. But indeed, they will have different normal lines. In another words, if you use box between two points, sides of box, except top and bottom, will face different direction from above 3 methods.
let me know pls if you need further explanation.
For the sake of another method, I achieved this through trigonometry. This made the code very minimal. Here is the end result:
In my case the nodes are always placed on a fixed plane that slices the Y-Axis.
// Create Cylinder Geometry
let line = SCNCylinder(radius: 0.002, height: node1.distance(to: node2))
// Create Material
let material = SCNMaterial()
material.diffuse.contents = UIColor.red
material.lightingModel = .phong
line.materials = [material]
// Create Cylinder(line) Node
let newLine = SCNNode()
newLine.geometry = line
newLine.position = posBetween(first: node1, second: node2)
// This is the change in x,y and z between node1 and node2
let dirVector = SCNVector3Make(node2.x - node1.x, node2.y - node1.y, node2.z - node1.z)
// Get Y rotation in radians
let yAngle = atan(dirVector.x / dirVector.z)
// Rotate cylinder node about X axis so cylinder is laying down
currentLine.eulerAngles.x = .pi / 2
// Rotate cylinder node about Y axis so cylinder is pointing to each node
currentLine.eulerAngles.y = yAngle
This is the function to get the position between two nodes, place it within your class:
func posBetween(first: SCNVector3, second: SCNVector3) -> SCNVector3 {
return SCNVector3Make((first.x + second.x) / 2, (first.y + second.y) / 2, (first.z + second.z) / 2)
}
This is the extension to get the distance between nodes for the cylinder height, place it somewhere outside of your class:
extension SCNVector3 {
func distance(to destination: SCNVector3) -> CGFloat {
let dx = destination.x - x
let dy = destination.y - y
let dz = destination.z - z
return CGFloat(sqrt(dx*dx + dy*dy + dz*dz))
}
}
If you don't have one fixed axis like myself then you could do the extra trig to use this method.
@maury-markowitz's answer worked for me, here is the latest (Swift4) version of it.
To anyone working with SCNVector3 in Swift I can only recommend to add the +-*/ operator overloads somewhere in your code (e.g. from here).
extension SCNNode {
static func lineNode(from: SCNVector3, to: SCNVector3, radius: CGFloat = 0.25) -> SCNNode {
let vector = to - from
let height = vector.length()
let cylinder = SCNCylinder(radius: radius, height: CGFloat(height))
cylinder.radialSegmentCount = 4
let node = SCNNode(geometry: cylinder)
node.position = (to + from) / 2
node.eulerAngles = SCNVector3.lineEulerAngles(vector: vector)
return node
}
}
extension SCNVector3 {
static func lineEulerAngles(vector: SCNVector3) -> SCNVector3 {
let height = vector.length()
let lxz = sqrtf(vector.x * vector.x + vector.z * vector.z)
let pitchB = vector.y < 0 ? Float.pi - asinf(lxz/height) : asinf(lxz/height)
let pitch = vector.z == 0 ? pitchB : sign(vector.z) * pitchB
var yaw: Float = 0
if vector.x != 0 || vector.z != 0 {
let inner = vector.x / (height * sinf(pitch))
if inner > 1 || inner < -1 {
yaw = Float.pi / 2
} else {
yaw = asinf(inner)
}
}
return SCNVector3(CGFloat(pitch), CGFloat(yaw), 0)
}
}