AVPlayer stops playing and doesn't resume again
Yes, it stops because the buffer is empty so it has to wait to load more video. After that you have to manually ask for start again. To solve the problem I followed these steps:
1) Detection: To detect when the player has stopped I use the KVO with the rate property of the value:
-(void)observeValueForKeyPath:(NSString *)keyPath ofObject:(id)object change:(NSDictionary *)change context:(void *)context
{
if ([keyPath isEqualToString:@"rate"] )
{
if (self.player.rate == 0 && CMTimeGetSeconds(self.playerItem.duration) != CMTimeGetSeconds(self.playerItem.currentTime) && self.videoPlaying)
{
[self continuePlaying];
}
}
}
This condition: CMTimeGetSeconds(self.playerItem.duration) != CMTimeGetSeconds(self.playerItem.currentTime) is to detect the difference between arriving at the end of the video or stopping in the middle
2) Wait for the video to load - If you continue playing directly you will not have enough buffer to continue playing without interruption. To know when to start you have to observe the value playbackLikelytoKeepUp from the playerItem (here I use a library to observe with blocks but I think it makes the point):
-(void)continuePlaying
{
if (!self.playerItem.playbackLikelyToKeepUp)
{
self.loadingView.hidden = NO;
__weak typeof(self) wSelf = self;
self.playbackLikelyToKeepUpKVOToken = [self.playerItem addObserverForKeyPath:@keypath(_playerItem.playbackLikelyToKeepUp) block:^(id obj, NSDictionary *change) {
__strong typeof(self) sSelf = wSelf;
if(sSelf)
{
if (sSelf.playerItem.playbackLikelyToKeepUp)
{
[sSelf.playerItem removeObserverForKeyPath:@keypath(_playerItem.playbackLikelyToKeepUp) token:self.playbackLikelyToKeepUpKVOToken];
sSelf.playbackLikelyToKeepUpKVOToken = nil;
[sSelf continuePlaying];
}
}
}];
}
And that's it! problem solved
Edit: By the way the library used is libextobjc
I am working with video files, so there's more to my code than you need, but the following solution should pause the player when it hangs, then check every 0.5 second to see whether we've buffered enough to keep up. If so, it restarts the player. If the player hangs for more than 10 seconds without restarting, we stop the player and apologize to the user. This means you need the right observers in place. The code below is working pretty well for me.
properties defined / init'd in a .h file or elsewhere:
AVPlayer *player;
int playerTryCount = -1; // this should get set to 0 when the AVPlayer starts playing
NSNotificationCenter *notificationCenter = [NSNotificationCenter defaultCenter];
partial .m:
- (AVPlayer *)initializePlayerFromURL:(NSURL *)movieURL {
// create AVPlayer
AVPlayerItem *videoItem = [AVPlayerItem playerItemWithURL:movieURL];
AVPlayer *videoPlayer = [AVPlayer playerWithPlayerItem:videoItem];
// add Observers
[videoItem addObserver:self forKeyPath:@"playbackLikelyToKeepUp" options:NSKeyValueObservingOptionInitial | NSKeyValueObservingOptionNew context:nil];
[self startNotificationObservers]; // see method below
// I observe a bunch of other stuff, but this is all you need for this to work
return videoPlayer;
}
- (void)observeValueForKeyPath:(NSString *)keyPath ofObject:(id)object change:(NSDictionary *)change context:(void *)context {
// check that all conditions for a stuck player have been met
if ([keyPath isEqualToString:@"playbackLikelyToKeepUp"]) {
if (self.player.currentItem.playbackLikelyToKeepUp == NO &&
CMTIME_COMPARE_INLINE(self.player.currentTime, >, kCMTimeZero) &&
CMTIME_COMPARE_INLINE(self.player.currentTime, !=, self.player.currentItem.duration)) {
// if so, post the playerHanging notification
[self.notificationCenter postNotificationName:PlayerHangingNotification object:self.videoPlayer];
}
}
}
- (void)startNotificationObservers {
[self.notificationCenter addObserver:self
selector:@selector(playerContinue)
name:PlayerContinueNotification
object:nil];
[self.notificationCenter addObserver:self
selector:@selector(playerHanging)
name:PlayerHangingNotification
object:nil];
}
// playerHanging simply decides whether to wait 0.5 seconds or not
// if so, it pauses the player and sends a playerContinue notification
// if not, it puts us out of our misery
- (void)playerHanging {
if (playerTryCount <= 10) {
playerTryCount += 1;
[self.player pause];
// start an activity indicator / busy view
[self.notificationCenter postNotificationName:PlayerContinueNotification object:self.player];
} else { // this code shouldn't actually execute, but I include it as dummyproofing
[self stopPlaying]; // a method where I clean up the AVPlayer,
// which is already paused
// Here's where I'd put up an alertController or alertView
// to say we're sorry but we just can't go on like this anymore
}
}
// playerContinue does the actual waiting and restarting
- (void)playerContinue {
if (CMTIME_COMPARE_INLINE(self.player.currentTime, ==, self.player.currentItem.duration)) { // we've reached the end
[self stopPlaying];
} else if (playerTryCount > 10) // stop trying
[self stopPlaying];
// put up "sorry" alert
} else if (playerTryCount == 0) {
return; // protects against a race condition
} else if (self.player.currentItem.playbackLikelyToKeepUp == YES) {
// Here I stop/remove the activity indicator I put up in playerHanging
playerTryCount = 0;
[self.player play]; // continue from where we left off
} else { // still hanging, not at end
// create a 0.5-second delay to see if buffering catches up
// then post another playerContinue notification to call this method again
// in a manner that attempts to avoid any recursion or threading nightmares
playerTryCount += 1;
double delayInSeconds = 0.5;
dispatch_time_t executeTime = dispatch_time(DISPATCH_TIME_NOW, delayInSeconds * NSEC_PER_SEC);
dispatch_after(executeTime, dispatch_get_main_queue(), ^{
// test playerTryCount again to protect against changes that might have happened during the 0.5 second delay
if (playerTryCount > 0) {
if (playerTryCount <= 10) {
[self.notificationCenter postNotificationName:PlayerContinueNotification object:self.videoPlayer];
} else {
[self stopPlaying];
// put up "sorry" alert
}
}
});
}
Hope it helps!
Accepted answer gives a possible solution to the problem, but it lacks flexibility, also it's hard to read. Here's more flexible solution.
Add observers:
//_player is instance of AVPlayer
[_player.currentItem addObserver:self forKeyPath:@"status" options:0 context:nil];
[_player addObserver:self forKeyPath:@"rate" options:0 context:nil];
Handler:
-(void)observeValueForKeyPath:(NSString*)keyPath
ofObject:(id)object
change:(NSDictionary*)change
context:(void*)context {
if ([keyPath isEqualToString:@"status"]) {
if (_player.status == AVPlayerStatusFailed) {
//Possibly show error message or attempt replay from tart
//Description from the docs:
// Indicates that the player can no longer play AVPlayerItem instances because of an error. The error is described by
// the value of the player's error property.
}
}else if ([keyPath isEqualToString:@"rate"]) {
if (_player.rate == 0 && //if player rate dropped to 0
CMTIME_COMPARE_INLINE(_player.currentItem.currentTime, >, kCMTimeZero) && //if video was started
CMTIME_COMPARE_INLINE(_player.currentItem.currentTime, <, _player.currentItem.duration) && //but not yet finished
_isPlaying) { //instance variable to handle overall state (changed to YES when user triggers playback)
[self handleStalled];
}
}
}
Magic:
-(void)handleStalled {
NSLog(@"Handle stalled. Available: %lf", [self availableDuration]);
if (_player.currentItem.playbackLikelyToKeepUp || //
[self availableDuration] - CMTimeGetSeconds(_player.currentItem.currentTime) > 10.0) {
[_player play];
} else {
[self performSelector:@selector(handleStalled) withObject:nil afterDelay:0.5]; //try again
}
}
The "[self availableDuration]" is optional, but you can manually launch playback based on amount of video available. You can change how often the code checks whether enough video is buffered. If you decide to use the optional part, here's the method implementation:
- (NSTimeInterval) availableDuration
{
NSArray *loadedTimeRanges = [[_player currentItem] loadedTimeRanges];
CMTimeRange timeRange = [[loadedTimeRanges objectAtIndex:0] CMTimeRangeValue];
Float64 startSeconds = CMTimeGetSeconds(timeRange.start);
Float64 durationSeconds = CMTimeGetSeconds(timeRange.duration);
NSTimeInterval result = startSeconds + durationSeconds;
return result;
}
Don't forget the cleanup. Remove observers:
[_player.currentItem removeObserver:self forKeyPath:@"status"];
[_player removeObserver:self forKeyPath:@"rate"];
And possible pending calls to handle stalled video:
[UIView cancelPreviousPerformRequestsWithTarget:self selector:@selector(handleStalled) object:nil];