Print time in a batch file (milliseconds)

Below batch "program" should do what you want. Please note that it outputs the data in centiseconds instead of milliseconds. The precision of the used commands is only centiseconds.

Here is an example output:

STARTTIME: 13:42:52,25
ENDTIME: 13:42:56,51
STARTTIME: 4937225 centiseconds
ENDTIME: 4937651 centiseconds
DURATION: 426 in centiseconds
00:00:04,26

Here is the batch script:

@echo off
setlocal

rem The format of %TIME% is HH:MM:SS,CS for example 23:59:59,99
set STARTTIME=%TIME%

rem here begins the command you want to measure
dir /s > nul
rem here ends the command you want to measure

set ENDTIME=%TIME%

rem output as time
echo STARTTIME: %STARTTIME%
echo ENDTIME: %ENDTIME%

rem convert STARTTIME and ENDTIME to centiseconds
set /A STARTTIME=(1%STARTTIME:~0,2%-100)*360000 + (1%STARTTIME:~3,2%-100)*6000 + (1%STARTTIME:~6,2%-100)*100 + (1%STARTTIME:~9,2%-100)
set /A ENDTIME=(1%ENDTIME:~0,2%-100)*360000 + (1%ENDTIME:~3,2%-100)*6000 + (1%ENDTIME:~6,2%-100)*100 + (1%ENDTIME:~9,2%-100)

rem calculating the duratyion is easy
set /A DURATION=%ENDTIME%-%STARTTIME%

rem we might have measured the time inbetween days
if %ENDTIME% LSS %STARTTIME% set set /A DURATION=%STARTTIME%-%ENDTIME%

rem now break the centiseconds down to hors, minutes, seconds and the remaining centiseconds
set /A DURATIONH=%DURATION% / 360000
set /A DURATIONM=(%DURATION% - %DURATIONH%*360000) / 6000
set /A DURATIONS=(%DURATION% - %DURATIONH%*360000 - %DURATIONM%*6000) / 100
set /A DURATIONHS=(%DURATION% - %DURATIONH%*360000 - %DURATIONM%*6000 - %DURATIONS%*100)

rem some formatting
if %DURATIONH% LSS 10 set DURATIONH=0%DURATIONH%
if %DURATIONM% LSS 10 set DURATIONM=0%DURATIONM%
if %DURATIONS% LSS 10 set DURATIONS=0%DURATIONS%
if %DURATIONHS% LSS 10 set DURATIONHS=0%DURATIONHS%

rem outputing
echo STARTTIME: %STARTTIME% centiseconds
echo ENDTIME: %ENDTIME% centiseconds
echo DURATION: %DURATION% in centiseconds
echo %DURATIONH%:%DURATIONM%:%DURATIONS%,%DURATIONHS%

endlocal
goto :EOF

If you're doing something like

for /l %%i in (1,1,500) do @echo %time%

or

if foo (
    echo %time%
    do_something
    echo %time%
)

then you could simply put a setlocal enabledelayedexpansion at the beginning of your batch file and use !time! instead of %time% which gets evaluated on execution, not on parsing the line (which includes complete blocks enclosed in parentheses).

%time% should work, provided enough time has elapsed between calls:

@echo OFF

@echo %time%
ping -n 1 -w 1 127.0.0.1 1>nul
@echo %time%

On my system I get the following output:

6:46:13.50
6:46:13.60