OpenCV - Removal of noise in image

As I know the median filter is the best solution to reduce noise. I would recommend to use median filter with 3x3 window. See function cv::medianBlur().

But be careful when use any noise filtration simultaneously with OCR. Its can lead to decreasing of recognition accuracy.

Also I would recommend to try using pair of functions (cv::erode() and cv::dilate()). But I'm not shure that it will best solution then cv::medianBlur() with window 3x3.

My solution is based on thresholding to get the resulted image in 4 steps.

1. Read image by OpenCV 3.2.0.
2. Apply GaussianBlur() to smooth image especially the region in gray color.
3. Mask the image to change text to white and the rest to black.
4. Invert the masked image to black text in white.

The code is in Python 2.7. It can be changed to C++ easily.

import numpy as np
import cv2
import matplotlib.pyplot as plt
%matplotlib inline 

# read Danish doc image 
img = cv2.imread('./imagesStackoverflow/danish_invoice.png')

# apply GaussianBlur to smooth image
blur = cv2.GaussianBlur(img,(5,3), 1) 

# threshhold gray region to white (255,255, 255) and sets the rest to black(0,0,0)
mask=cv2.inRange(blur,(0,0,0),(150,150,150))

# invert the image to have text black-in-white
res = 255 - mask

plt.figure(1)
plt.subplot(121), plt.imshow(img[:,:,::-1]), plt.title('original') 
plt.subplot(122), plt.imshow(blur, cmap='gray'), plt.title('blurred')
plt.figure(2)
plt.subplot(121), plt.imshow(mask, cmap='gray'), plt.title('masked')
plt.subplot(122), plt.imshow(res, cmap='gray'), plt.title('result')
plt.show()

The following is the plotted images by the code for reference.

Here is the result image at 2197 x 3218 pixels.

I tried some filters/operations in OpenCV and it seems to work pretty well.

Step 1: Dilate the image -

kernel = np.ones((5, 5), np.uint8)
cv2.dilate(img, kernel, iterations = 1)

As you see, the noise is gone but the characters are very light, so I eroded the image.

Step 2: Erode the image -

kernel = np.ones((5, 5), np.uint8)
cv2.erode(img, kernel, iterations = 1)

As you can see, the noise is gone however some characters on the other columns are broken. I would recommend running these operations on the noisy column only. You might want to use HoughLines to find the last column. Then you can extract that column only, run dilation + erosion and replace this with the corresponding column in the original image. Additionally, dilation + erosion is actually an operation called closing. This you could call directly using -

cv2.morphologyEx(img, cv2.MORPH_CLOSE, kernel)

As @Ermlg suggested, medianBlur with a kernel of 3 also works wonderfully.

cv2.medianBlur(img, 3)

Alternative Step

As you can see all these filters work but it is better if you implement these filters only in the part where the noise is. To do that, use the following:

edges = cv2.Canny(img, 50, 150, apertureSize = 3) // img is gray here
lines = cv2.HoughLinesP(edges, 1, np.pi / 180, 100, 1000, 50) // last two arguments are minimum line length and max gap between two lines respectively.
for line in lines: 
    for x1, y1, x2, y2 in line: 
        print x1, y1
// This gives the start coordinates for all the lines. You should take the x value which is between (0.75 * w, w) where w is the width of the entire image. This will give you essentially **(x1, y1) = (1896, 766)**

Then, you can extract this part only like :

extract = img[y1:h, x1:w] // w, h are width and height of the image

Then, implement the filter (median or closing) in this image. After removing the noise, you need to put this filtered image in place of the blurred part in the original image. image[y1:h, x1:w] = median

This is straightforward in C++ :

extract.copyTo(img, new Rect(x1, y1, w - x1, h - y1))

Final Result with alternate method

Hope it helps!