"Z-level" in TikZ
Yes. They are called "layers". I've used this a few times in various solutions:
- Are boolean operations on TikZ shapes possible?
- Modified /tikz/double that doesn't go all the way to the end of lines
- Drawing a hypergraph
- How can I set the background color of the rows and columns of a matrix node in Tikz?
As have various others:
https://tex.stackexchange.com/search?q=pgfonlayer
Update: In a desperate attempt to "out-TikZ" Martin, here's a version that works as a key on a single path. It works by a bit of sneaky hackery together with careful observation as to when particular commands get executed. We need to install some code at the beginning and the end of the path. The beginning is okay as TikZ options get parsed early on. The end is a little trickier and that's where the sneaky hackery comes in. Basically, the \tikz@path@do@at@end macro gets done, as it says, at the end. It occurs after an \endgroup and the keys on the path are examined inside that group, so at first sight it seems that there's no way for a key inside the group to hook in to that \tikz@path@do@at@end without making a global assignment (something I'm reluctant to do). But if we introduce a new \begingroup then the original \endgroup at the end of the TikZ path-setting routine no longer ends the main grouping but ends our internal grouping, thus allowing us access to \tikz@path@do@at@end. So long as we are careful and end the outer group, followed again by \tikz@path@do@at@end (which is now back to its original meaning) then we can put our layer ending code there.
\documentclass{article}
\usepackage{tikz}
\pgfdeclarelayer{back}
\pgfsetlayers{back,main}
\makeatletter
\pgfkeys{%
/tikz/on layer/.code={
\def\tikz@path@do@at@end{\endpgfonlayer\endgroup\tikz@path@do@at@end}%
\pgfonlayer{#1}\begingroup%
}%
}
\makeatother
\begin{document}
\begin{tikzpicture}
\fill[green!50!white,opacity=.5] (0,0) rectangle (8,8);
\begin{pgfonlayer}{back}
\draw[ultra thick,red,line width=1cm] (-1,-1) -- (9,9);
\end{pgfonlayer}
\draw[ultra thick,red,line width=1cm,on layer=back] (-1,9) -- (9,-1);
\end{tikzpicture}
\end{document}
with the result that both the red lines are behind the green rectangle.
(As with many of my hackery answers, this comes with a "use at own risk" warning, and is also as much about the hack as the specific application. Indeed, I'd been looking for a way to hook in to that \tikz@path@do@at@end macro for something else and this might just be how I can do it.)
Edit: (again) I don't know how "safe" modifying \tikz@path@do@at@end is so here's an alternative that uses \aftergroup instead. It uses the same idea of the hack: start a new group so that the existing \endgroup is taken as the end of the inner group. This is a replacement for the \pgfkeys bit in the previous example:
\pgfkeys{%
/tikz/on layer/.code={
\pgfonlayer{#1}\begingroup
\aftergroup\endpgfonlayer
\aftergroup\endgroup
},
/tikz/node on layer/.code={
\pgfonlayer{#1}\begingroup
\expandafter\def\expandafter\tikz@node@finish\expandafter{\expandafter\endgroup\expandafter\endpgfonlayer\tikz@node@finish}%
}
}
Update: As Bruce pointed out in the comments, on layer doesn't work within the \node command (though \path[on layer=back] node {node}; works). That's because \node[options] becomes \path node[options] and not \path[options] node so the hooks are in different places. After a bit of detective work, I found a hook to hang the closing bit of the layer command on. So \node[node on layer=back] {on back layer}; works. I still need to look a bit further to find something that works with \draw (0,0) -- node[put this on the back layer but not the path] {back} (8,0);.
(and no longer any need for \makeatletter!)
Update (2012-03-07): Revisiting this, I found that the node on layer was no longer working (if it ever did - I'm dubious now as I don't think that the TikZ code has changed). I have found a new set of hooks to hook into for the nodes. One significant advantage of the new approach is that it is possible to put nodes on a different level to their surrounding path. Rather neat, I thought.
Here's the current code:
\documentclass{article}
%\url{https://tex.stackexchange.com/q/46957/86}
\usepackage{tikz}
%\usepackage[tracelevel=silent]{trace-pgfkeys}
\pgfdeclarelayer{back}
\pgfdeclarelayer{front}
\pgfsetlayers{back,main,front}
\makeatletter
\pgfkeys{%
/tikz/on layer/.code={
\pgfonlayer{#1}\begingroup
\aftergroup\endpgfonlayer
\aftergroup\endgroup
},
/tikz/node on layer/.code={
\gdef\node@@on@layer{%
\setbox\tikz@tempbox=\hbox\bgroup\pgfonlayer{#1}\unhbox\tikz@tempbox\endpgfonlayer\egroup}
\aftergroup\node@on@layer
},
/tikz/end node on layer/.code={
\endpgfonlayer\endgroup\endgroup
}
}
\def\node@on@layer{\aftergroup\node@@on@layer}
\makeatother
\begin{document}
\begin{tikzpicture}
\draw[line width=1cm,red] (2,1) -- (2,-1);
\draw[ultra thick,white,preaction={on layer=back,line width=1cm,blue,draw}] (0,0) -- (4,0);
\draw[line width=1cm,red] (2,-2) -- (2,-4);
\draw[ultra thick,white,postaction={on layer=back,line width=1cm,blue,draw}] (0,-3) -- (4,-3);
\begin{scope}[xshift=5cm]
\draw[line width=1cm,red] (2,1) -- (2,-1);
\draw[ultra thick,white,preaction={line width=1cm,blue,draw}] (0,0) -- (4,0);
\draw[line width=1cm,red] (2,-2) -- (2,-4);
\draw[ultra thick,white,postaction={line width=1cm,blue,draw}] (0,-3) -- (4,-3);
\end{scope}
\begin{scope}[yshift=-5.2cm,xshift=2cm]
\draw[line width=1cm,red] (0,1) -- (0,-1);
\path[on layer=back] node[draw] (a) {At the back of beyond};
\node[node on layer=front] at (0,-2) (b) {At the front of beyond};
\draw[line width=1cm,red] (b.north) -- (b.south);
\draw[line width=1cm,red] node[thin,black,draw,node on layer=back] at (0,-4) (c) {At the side of beyond} (c.north) -- (c.south);
\begin{scope}[xshift=5cm]
\draw[line width=1cm,red] (0,1) -- (0,-1);
\path node[draw] (a) {At the back of beyond};
\node at (0,-2) (b) {At the front of beyond};
\draw[line width=1cm,red] (b.north) -- (b.south);
\draw[line width=1cm,red] node[thin,black,draw] at (0,-4) (c) {At the side of beyond} (c.north) -- (c.south);
\end{scope}
\end{scope}
\end{tikzpicture}
\end{document}
(NB the commented out package is left in deliberately as it was very useful in figuring out what was going on. See How do I debug pgfkeys? for more details on that package.)
Here's the result of the above. In each case, the layering is happening on the left and not on the right. The fact that the left and right are different proves that something is being shifted from one layer to another.
You can use the layers describe in section 108 Layered Graphics of the pgfmanual.
You need to declare the layers first using \pgfdeclarelayer and then
use them with \pgfsetlayers outside the picture.
With the {pgfonlayer}{<layer name>} environment you can can wrap TikZ or PGF commands to be drawn on this layer. The background library provides a on background layer style for scopes, so it should be possible to define a zlevel style as well:
\tikzset{zlevel/.style={%
execute at begin scope={\pgfonlayer{#1}},
execute at end scope={\endpgfonlayer}
}}
But you need to put all the commands into a scope.
This is merely a supplement to Loop Space's fantastic answer, which makes it work as I'd expect with the TikZ backgrounds library. The only reason I've renamed the background and foreground layers is for consistency with the backgrounds library and with my own extension of that.
\documentclass[border=10pt,multi,tikz]{standalone}
\usetikzlibrary{backgrounds}
\pgfdeclarelayer{foreground}
\pgfsetlayers{background,main,foreground}
\makeatletter
% addasu o tex/generic/pgf/frontendlayer/tikz/libraries/tikzlibrarybackgrounds.code.tex
\tikzset{%
on foreground layer/.style={%
execute at begin scope={%
\pgfonlayer{foreground}%
\let\tikz@options=\pgfutil@empty%
\tikzset{every on foreground layer/.try,#1}%
\tikz@options%
},
execute at end scope={\endpgfonlayer}
},
% addasu o ateb Loop Space: https://tex.stackexchange.com/a/20426/
%\url{https://tex.stackexchange.com/q/46957/86}
on layer/.code={%
\pgfonlayer{#1}\begingroup
\aftergroup\endpgfonlayer
\aftergroup\endgroup
},
node on layer/.code={%
\gdef\node@@on@layer{%
\setbox\tikz@tempbox=\hbox\bgroup\pgfonlayer{#1}\unhbox\tikz@tempbox\endpgfonlayer\egroup}
\aftergroup\node@on@layer
},
}
\def\node@on@layer{\aftergroup\node@@on@layer}
\makeatother
\begin{document}
\begin{tikzpicture}
\draw[line width=1cm,red] (2,1) -- (2,-1);
\draw[ultra thick,white,preaction={on layer=background,line width=1cm,blue,draw}] (0,0) -- (4,0);
\draw[line width=1cm,red] (2,-2) -- (2,-4);
\draw[ultra thick,white,postaction={on layer=background,line width=1cm,blue,draw}] (0,-3) -- (4,-3);
\begin{scope}[xshift=5cm]
\draw[line width=1cm,red] (2,1) -- (2,-1);
\draw[ultra thick,white,preaction={line width=1cm,blue,draw}] (0,0) -- (4,0);
\draw[line width=1cm,red] (2,-2) -- (2,-4);
\draw[ultra thick,white,postaction={line width=1cm,blue,draw}] (0,-3) -- (4,-3);
\end{scope}
\begin{scope}[yshift=-5.2cm,xshift=2cm]
\draw[line width=1cm,red] (0,1) -- (0,-1);
\path[on layer=background] node[draw] (a) {At the background of beyond};
\node[node on layer=foreground] at (0,-2) (b) {At the front of beyond};
\draw[line width=1cm,red] (b.north) -- (b.south);
\draw[line width=1cm,red] node[thin,black,draw,node on layer=background] at (0,-4) (c) {At the side of beyond} (c.north) -- (c.south);
\begin{scope}[xshift=5cm]
\draw[line width=1cm,red] (0,1) -- (0,-1);
\path node[draw] (a) {At the background of beyond};
\node at (0,-2) (b) {At the front of beyond};
\draw[line width=1cm,red] (b.north) -- (b.south);
\draw[line width=1cm,red] node[thin,black,draw] at (0,-4) (c) {At the side of beyond} (c.north) -- (c.south);
\end{scope}
\end{scope}
\path (current bounding box.north west) -- (current bounding box.north east) \foreach \i [count=\j] in {0,.225,.275,.5,.725,.775,1} {coordinate [pos=\i] (p\j)};
\begin{scope}[on background layer]
\fill [yellow, fill opacity=.3] (current bounding box.north west) rectangle (current bounding box.south -| p2) (p7) rectangle (p6 |- current bounding box.south);
\end{scope}
\begin{scope}[on foreground layer]
\fill [green, fill opacity=.3] (p2) rectangle (current bounding box.south -| p3) (p6) rectangle (p5 |- current bounding box.south);
\end{scope}
\fill [magenta, fill opacity=.3] (p3) rectangle (current bounding box.south -| p4) (p5) rectangle (p4 |- current bounding box.south);
\end{tikzpicture}
\end{document}
