How do I change a Crystal Report's ODBC database connection at runtime?

After even more research I found that there was a two part answer.

PART 1

If you are connecting to PostgreSQL via ODBC (the only way Crystal Reports can pull data from PostgreSQL as of the time of this writing) using the data owner you then you can use the following code:

reportDoc.Load(report);
reportDoc.DataSourceConnections[0].SetConnection("Driver={PostgreSQL ANSI};Server=myServer;Port=5432;", "myDatabase", "myUser", "myPassword");
reportDoc.ExportToDisk(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat, path);
// Depending on your application you may have more than one data source connection that needs to be changed.

This method only works if you are connecting as a user that owns the data that you are reporting on because the schema name does not need to be supplied.

PART 2

If you are connecting to PostgreSQL via ODBC with a user other than the data owner then you need to manually supply the schema name. This is accomplished with the following code.

reportDoc.Load(report);

ConnectionInfo connInfo = new ConnectionInfo();
connInfo.ServerName = "Driver={PostgreSQL ANSI};Server=myServer;Port=5432;";
connInfo.DatabaseName = "myDatabase";
connInfo.UserID = "myUser";
connInfo.Password = "myPassword";

TableLogOnInfo tableLogOnInfo = new TableLogOnInfo();
tableLogOnInfo.ConnectionInfo = connInfo;

foreach (Table table in reportDoc.Database.Tables)
{
    table.ApplyLogOnInfo(tableLogOnInfo);
    table.LogOnInfo.ConnectionInfo.ServerName = connInfo.ServerName;
    table.LogOnInfo.ConnectionInfo.DatabaseName = connInfo.DatabaseName;
    table.LogOnInfo.ConnectionInfo.UserID = connInfo.UserID;
    table.LogOnInfo.ConnectionInfo.Password = connInfo.Password;

    // Apply the schema name to the table's location
    table.Location = "mySchema." + table.Location;
}

reportDoc.ExportToDisk(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat, path);

Summary

There are two critical pieces of information here when trying to connect to a PostgreSQL database from Crystal Reports.

1. The driver, server, and port number must all be specified in the server name property.
2. If connecting as a user other than the data owner you must specify the schema name for each table you are pulling data from.

Sources

There were several sources used that did not have an answer that worked in my specific scenario but that led me in the right direction. These sources are listed below.

• Nathan Koop's Answer
• https://www.sdn.sap.com/irj/scn/thread?messageID=6913827#6913827
• Best Practices for Changing Databases at Runtime

I just went through this same ordeal.

I set my connections like this (where sDataSource etc... are string with the information)

    Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
    myConnectionInfo.ServerName = sDataSource
    myConnectionInfo.DatabaseName = sInitialCatalog
    myConnectionInfo.UserID = sUserID
    myConnectionInfo.Password = sPassword

    Dim myTables As Tables = report.Database.Tables
    Dim myTableLogonInfo As TableLogOnInfo = New TableLogOnInfo()
    myTableLogonInfo.ConnectionInfo = myConnectionInfo
    For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
        myTable.ApplyLogOnInfo(myTableLogonInfo)

        myTable.LogOnInfo.ConnectionInfo.DatabaseName = myTableLogonInfo.ConnectionInfo.DatabaseName
        myTable.LogOnInfo.ConnectionInfo.ServerName = myTableLogonInfo.ConnectionInfo.ServerName
        myTable.LogOnInfo.ConnectionInfo.UserID = myTableLogonInfo.ConnectionInfo.UserID
        myTable.LogOnInfo.ConnectionInfo.Password = myTableLogonInfo.ConnectionInfo.Password

    Next

First of all thank you for this information!!!

I'm using MySQL/C#/Crystal Reports. After setting up the ODBC/DSN something as simple as this worked for me.

using CrystalDecisions.CrystalReports.Engine;

using CrystalDecisions.Shared;

using MySql.Data.MySqlClient;

.
.
.

ConnectionInfo connInfo = new ConnectionInfo();

connInfo.ServerName = "Driver={MySQL ODBC 3.51 Driver};DSN=MyODBCDatasourceName";

TableLogOnInfo tableLogOnInfo = new TableLogOnInfo();

tableLogOnInfo.ConnectionInfo = connInfo;

// rpt is my Crystal Reports ReportDocument

// Apply the schema name to the table's location

foreach (Table table in rpt.Database.Tables)

{

    table.ApplyLogOnInfo(tableLogOnInfo);

    table.Location = table.Location;

}