One DbContext per web request... why?

Not a single answer here actually answers the question. The OP did not ask about a singleton/per-application DbContext design, he asked about a per-(web)request design and what potential benefits could exist.

I'll reference http://mehdi.me/ambient-dbcontext-in-ef6/ as Mehdi is a fantastic resource:

Possible performance gains.

Each DbContext instance maintains a first-level cache of all the entities its loads from the database. Whenever you query an entity by its primary key, the DbContext will first attempt to retrieve it from its first-level cache before defaulting to querying it from the database. Depending on your data query pattern, re-using the same DbContext across multiple sequential business transactions may result in a fewer database queries being made thanks to the DbContext first-level cache.

It enables lazy-loading.

If your services return persistent entities (as opposed to returning view models or other sorts of DTOs) and you'd like to take advantage of lazy-loading on those entities, the lifetime of the DbContext instance from which those entities were retrieved must extend beyond the scope of the business transaction. If the service method disposed the DbContext instance it used before returning, any attempt to lazy-load properties on the returned entities would fail (whether or not using lazy-loading is a good idea is a different debate altogether which we won't get into here). In our web application example, lazy-loading would typically be used in controller action methods on entities returned by a separate service layer. In that case, the DbContext instance that was used by the service method to load these entities would need to remain alive for the duration of the web request (or at the very least until the action method has completed).

Keep in mind there are cons as well. That link contains many other resources to read on the subject.

Just posting this in case someone else stumbles upon this question and doesn't get absorbed in answers that don't actually address the question.

NOTE: This answer talks about the Entity Framework's DbContext, but it is applicable to any sort of Unit of Work implementation, such as LINQ to SQL's DataContext, and NHibernate's ISession.

Let start by echoing Ian: Having a single DbContext for the whole application is a Bad Idea. The only situation where this makes sense is when you have a single-threaded application and a database that is solely used by that single application instance. The DbContext is not thread-safe and and since the DbContext caches data, it gets stale pretty soon. This will get you in all sorts of trouble when multiple users/applications work on that database simultaneously (which is very common of course). But I expect you already know that and just want to know why not to just inject a new instance (i.e. with a transient lifestyle) of the DbContext into anyone who needs it. (for more information about why a single DbContext -or even on context per thread- is bad, read this answer).

Let me start by saying that registering a DbContext as transient could work, but typically you want to have a single instance of such a unit of work within a certain scope. In a web application, it can be practical to define such a scope on the boundaries of a web request; thus a Per Web Request lifestyle. This allows you to let a whole set of objects operate within the same context. In other words, they operate within the same business transaction.

If you have no goal of having a set of operations operate inside the same context, in that case the transient lifestyle is fine, but there are a few things to watch:

• Since every object gets its own instance, every class that changes the state of the system, needs to call _context.SaveChanges() (otherwise changes would get lost). This can complicate your code, and adds a second responsibility to the code (the responsibility of controlling the context), and is a violation of the Single Responsibility Principle.
• You need to make sure that entities [loaded and saved by a DbContext] never leave the scope of such a class, because they can't be used in the context instance of another class. This can complicate your code enormously, because when you need those entities, you need to load them again by id, which could also cause performance problems.
• Since DbContext implements IDisposable, you probably still want to Dispose all created instances. If you want to do this, you basically have two options. You need to dispose them in the same method right after calling context.SaveChanges(), but in that case the business logic takes ownership of an object it gets passed on from the outside. The second option is to Dispose all created instances on the boundary of the Http Request, but in that case you still need some sort of scoping to let the container know when those instances need to be Disposed.

Another option is to not inject a DbContext at all. Instead, you inject a DbContextFactory that is able to create a new instance (I used to use this approach in the past). This way the business logic controls the context explicitly. If might look like this:

public void SomeOperation()
{
    using (var context = this.contextFactory.CreateNew())
    {
        var entities = this.otherDependency.Operate(
            context, "some value");

        context.Entities.InsertOnSubmit(entities);

        context.SaveChanges();
    }
}

The plus side of this is that you manage the life of the DbContext explicitly and it is easy to set this up. It also allows you to use a single context in a certain scope, which has clear advantages, such as running code in a single business transaction, and being able to pass around entities, since they originate from the same DbContext.

The downside is that you will have to pass around the DbContext from method to method (which is termed Method Injection). Note that in a sense this solution is the same as the 'scoped' approach, but now the scope is controlled in the application code itself (and is possibly repeated many times). It is the application that is responsible for creating and disposing the unit of work. Since the DbContext is created after the dependency graph is constructed, Constructor Injection is out of the picture and you need to defer to Method Injection when you need to pass on the context from one class to the other.

Method Injection isn't that bad, but when the business logic gets more complex, and more classes get involved, you will have to pass it from method to method and class to class, which can complicate the code a lot (I've seen this in the past). For a simple application, this approach will do just fine though.

Because of the downsides, this factory approach has for bigger systems, another approach can be useful and that is the one where you let the container or the infrastructure code / Composition Root manage the unit of work. This is the style that your question is about.

By letting the container and/or the infrastructure handle this, your application code is not polluted by having to create, (optionally) commit and Dispose a UoW instance, which keeps the business logic simple and clean (just a Single Responsibility). There are some difficulties with this approach. For instance, were do you Commit and Dispose the instance?

Disposing a unit of work can be done at the end of the web request. Many people however, incorrectly assume that this is also the place to Commit the unit of work. However, at that point in the application, you simply can't determine for sure that the unit of work should actually be committed. e.g. If the business layer code threw an exception that was caught higher up the callstack, you definitely don't want to Commit.

The real solution is again to explicitly manage some sort of scope, but this time do it inside the Composition Root. Abstracting all business logic behind the command / handler pattern, you will be able to write a decorator that can be wrapped around each command handler that allows to do this. Example:

class TransactionalCommandHandlerDecorator<TCommand>
    : ICommandHandler<TCommand>
{
    readonly DbContext context;
    readonly ICommandHandler<TCommand> decorated;

    public TransactionCommandHandlerDecorator(
        DbContext context,
        ICommandHandler<TCommand> decorated)
    {
        this.context = context;
        this.decorated = decorated;
    }

    public void Handle(TCommand command)
    {
        this.decorated.Handle(command);

        context.SaveChanges();
    } 
}

This ensures that you only need to write this infrastructure code once. Any solid DI container allows you to configure such a decorator to be wrapped around all ICommandHandler<T> implementations in a consistent manner.

I'm pretty certain it is because the DbContext is not at all thread safe. So sharing the thing is never a good idea.

There are two contradicting recommendations by microsoft and many people use DbContexts in a completely divergent manner.

1. One recommendation is to "Dispose DbContexts as soon as posible" because having a DbContext Alive occupies valuable resources like db connections etc....
2. The other states that One DbContext per request is highly reccomended

Those contradict to each other because if your Request is doing a lot of unrelated to the Db stuff , then your DbContext is kept for no reason. Thus it is waste to keep your DbContext alive while your request is just waiting for random stuff to get done...

So many people who follow rule 1 have their DbContexts inside their "Repository pattern" and create a new Instance per Database Query so X*DbContext per Request

They just get their data and dispose the context ASAP. This is considered by MANY people an acceptable practice. While this has the benefits of occupying your db resources for the minimum time it clearly sacrifices all the UnitOfWork and Caching candy EF has to offer.

Keeping alive a single multipurpose instance of DbContext maximizes the benefits of Caching but since DbContext is not thread safe and each Web request runs on it's own thread, a DbContext per Request is the longest you can keep it.

So EF's team recommendation about using 1 Db Context per request it's clearly based on the fact that in a Web Application a UnitOfWork most likely is going to be within one request and that request has one thread. So one DbContext per request is like the ideal benefit of UnitOfWork and Caching.

But in many cases this is not true. I consider Logging a separate UnitOfWork thus having a new DbContext for Post-Request Logging in async threads is completely acceptable

So Finally it turns down that a DbContext's lifetime is restricted to these two parameters. UnitOfWork and Thread